board: sama5d2_xplained: Modify load addresses

When using OP-TEE, address range [0x20000000 - 0x22000000] is reserved.
This modification allows to have a system which always work even when
OP-TEE is present.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>

diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h
index 5c69b6b7bc179b72c06930b68df771d0bec2df64..da573bc96a811ca6b5a0faf23b4d670e34942097 100644 (file)
--- a/include/configs/sama5d2_xplained.h
+++ b/include/configs/sama5d2_xplained.h
@@ -11,15 +11,11 @@
 
 #include "at91-sama5_common.h"
 
-/* SDRAM */
-#define CONFIG_SYS_SDRAM_BASE           0x20000000
-#define CONFIG_SYS_SDRAM_SIZE          0x20000000
-
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_INIT_SP_ADDR                0x218000
 #else
 #define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
+       (0x22000000 + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 #endif
 
 /* SerialFlash */
@@ -29,18 +25,18 @@
 /* bootstrap + u-boot + env in sd card */
 #undef CONFIG_BOOTCOMMAND
 
-#define CONFIG_BOOTCOMMAND     "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x21000000 at91-sama5d2_xplained.dtb; " \
-                               "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x22000000 zImage; " \
-                               "bootz 0x22000000 - 0x21000000"
+#define CONFIG_BOOTCOMMAND     "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x22000000 at91-sama5d2_xplained.dtb; " \
+                               "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x23000000 zImage; " \
+                               "bootz 0x23000000 - 0x22000000"
 
 #elif CONFIG_SPI_BOOT
 
 /* bootstrap + u-boot + env in sd card, but kernel + dtb in eMMC */
 #undef CONFIG_BOOTCOMMAND
 
-#define CONFIG_BOOTCOMMAND     "ext4load mmc 0:1 0x21000000 /boot/at91-sama5d2_xplained.dtb; " \
-                               "ext4load mmc 0:1 0x22000000 /boot/zImage; " \
-                               "bootz 0x22000000 - 0x21000000"
+#define CONFIG_BOOTCOMMAND     "ext4load mmc 0:1 0x22000000 /boot/at91-sama5d2_xplained.dtb; " \
+                               "ext4load mmc 0:1 0x23000000 /boot/zImage; " \
+                               "bootz 0x23000000 - 0x22000000"
 
 #endif
 
@@ -49,9 +45,9 @@
 #undef CONFIG_BOOTCOMMAND
 #define CONFIG_ENV_SPI_BUS     1
 #define CONFIG_BOOTCOMMAND     "sf probe 1:0; "                        \
-                               "sf read 0x21000000 0x180000 0x80000; " \
-                               "sf read 0x22000000 0x200000 0x600000; "\
-                               "bootz 0x22000000 - 0x21000000"
+                               "sf read 0x22000000 0x180000 0x80000; " \
+                               "sf read 0x23000000 0x200000 0x600000; "\
+                               "bootz 0x23000000 - 0x22000000"
 
 #endif