mips: octeon: Add cvmx-helper-pko.c

Import cvmx-helper-pko.c from 2013 U-Boot. It will be used by the later
added drivers to support networking on the MIPS Octeon II / III
platforms.

Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>

diff --git a/arch/mips/mach-octeon/cvmx-helper-pko.c b/arch/mips/mach-octeon/cvmx-helper-pko.c
new file mode 100644 (file)
index 0000000..b9ac22c
--- /dev/null
+++ b/arch/mips/mach-octeon/cvmx-helper-pko.c
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018-2022 Marvell International Ltd.
+ *
+ * Helper Functions for the PKO
+ */
+
+#include <errno.h>
+#include <log.h>
+#include <time.h>
+#include <linux/delay.h>
+
+#include <mach/cvmx-regs.h>
+#include <mach/cvmx-csr.h>
+#include <mach/cvmx-bootmem.h>
+#include <mach/octeon-model.h>
+#include <mach/cvmx-fuse.h>
+#include <mach/octeon-feature.h>
+#include <mach/cvmx-qlm.h>
+#include <mach/octeon_qlm.h>
+#include <mach/cvmx-pcie.h>
+#include <mach/cvmx-coremask.h>
+#include <mach/cvmx-range.h>
+#include <mach/cvmx-global-resources.h>
+
+#include <mach/cvmx-agl-defs.h>
+#include <mach/cvmx-bgxx-defs.h>
+#include <mach/cvmx-ciu-defs.h>
+#include <mach/cvmx-gmxx-defs.h>
+#include <mach/cvmx-gserx-defs.h>
+#include <mach/cvmx-ilk-defs.h>
+#include <mach/cvmx-ipd-defs.h>
+#include <mach/cvmx-pcsx-defs.h>
+#include <mach/cvmx-pcsxx-defs.h>
+#include <mach/cvmx-pki-defs.h>
+#include <mach/cvmx-pko-defs.h>
+#include <mach/cvmx-xcv-defs.h>
+
+#include <mach/cvmx-hwpko.h>
+#include <mach/cvmx-ilk.h>
+#include <mach/cvmx-ipd.h>
+#include <mach/cvmx-pki.h>
+#include <mach/cvmx-pko3.h>
+#include <mach/cvmx-pko3-queue.h>
+#include <mach/cvmx-pko3-resources.h>
+
+#include <mach/cvmx-helper.h>
+#include <mach/cvmx-helper-board.h>
+#include <mach/cvmx-helper-cfg.h>
+
+#include <mach/cvmx-helper-bgx.h>
+#include <mach/cvmx-helper-cfg.h>
+#include <mach/cvmx-helper-util.h>
+#include <mach/cvmx-helper-pki.h>
+
+static s64 pko_fpa_config_pool = -1;
+static u64 pko_fpa_config_size = 1024;
+
+/**
+ * cvmx_override_pko_queue_priority(int pko_port, u64
+ * priorities[16]) is a function pointer. It is meant to allow
+ * customization of the PKO queue priorities based on the port
+ * number. Users should set this pointer to a function before
+ * calling any cvmx-helper operations.
+ */
+void (*cvmx_override_pko_queue_priority)(int ipd_port,
+                                        uint8_t *priorities) = NULL;
+
+int64_t cvmx_fpa_get_pko_pool(void)
+{
+       return pko_fpa_config_pool;
+}
+
+/**
+ * Gets the buffer size of pko pool
+ */
+u64 cvmx_fpa_get_pko_pool_block_size(void)
+{
+       return pko_fpa_config_size;
+}
+
+/**
+ * Initialize PKO command queue buffer pool
+ */
+static int cvmx_helper_pko_pool_init(void)
+{
+       u8 pool;
+       unsigned int buf_count;
+       unsigned int pkt_buf_count;
+       int rc;
+
+       /* Reserve pool */
+       pool = cvmx_fpa_get_pko_pool();
+
+       /* Avoid redundant pool creation */
+       if (cvmx_fpa_get_block_size(pool) > 0) {
+#ifdef DEBUG
+               debug("WARNING: %s: pool %d already initialized\n", __func__,
+                     pool);
+#endif
+               /* It is up to the app to have sufficient buffer count */
+               return pool;
+       }
+
+       /* Calculate buffer count: one per queue + 3-word-cmds * max_pkts */
+       pkt_buf_count = cvmx_fpa_get_packet_pool_buffer_count();
+       buf_count = CVMX_PKO_MAX_OUTPUT_QUEUES + (pkt_buf_count * 3) / 8;
+
+       /* Allocate pools for pko command queues */
+       rc = __cvmx_helper_initialize_fpa_pool(pool,
+                                              cvmx_fpa_get_pko_pool_block_size(),
+                                              buf_count, "PKO Cmd-bufs");
+
+       if (rc < 0)
+               debug("%s: ERROR: in PKO buffer pool\n", __func__);
+
+       pool = rc;
+       return pool;
+}
+
+/**
+ * Initialize the PKO
+ *
+ */
+int cvmx_helper_pko_init(void)
+{
+       int rc;
+
+       rc = cvmx_helper_pko_pool_init();
+       if (rc < 0)
+               return rc;
+
+       __cvmx_helper_init_port_config_data(0);
+
+       cvmx_pko_hw_init(cvmx_fpa_get_pko_pool(),
+                        cvmx_fpa_get_pko_pool_block_size());
+       return 0;
+}
+
+/**
+ * @INTERNAL
+ * Setup the PKO for the ports on an interface. The number of
+ * queues per port and the priority of each PKO output queue
+ * is set here. PKO must be disabled when this function is called.
+ *
+ * @param interface to setup PKO for
+ *
+ * @return Zero on success, negative on failure
+ *
+ * @note This is for PKO1/PKO2, and is not used for PKO3.
+ */
+int __cvmx_helper_interface_setup_pko(int interface)
+{
+       /*
+        * Each packet output queue has an associated priority. The
+        * higher the priority, the more often it can send a packet. A
+        * priority of 8 means it can send in all 8 rounds of
+        * contention. We're going to make each queue one less than
+        * the last.  The vector of priorities has been extended to
+        * support CN5xxx CPUs, where up to 16 queues can be
+        * associated to a port.  To keep backward compatibility we
+        * don't change the initial 8 priorities and replicate them in
+        * the second half.  With per-core PKO queues (PKO lockless
+        * operation) all queues have the same priority.
+        */
+       /* uint8_t priorities[16] = {8,7,6,5,4,3,2,1,8,7,6,5,4,3,2,1}; */
+       u8 priorities[16] = { [0 ... 15] = 8 };
+
+       /*
+        * Setup the IPD/PIP and PKO for the ports discovered
+        * above. Here packet classification, tagging and output
+        * priorities are set.
+        */
+       int num_ports = cvmx_helper_ports_on_interface(interface);
+
+       while (num_ports--) {
+               int ipd_port;
+
+               if (!cvmx_helper_is_port_valid(interface, num_ports))
+                       continue;
+
+               ipd_port = cvmx_helper_get_ipd_port(interface, num_ports);
+               /*
+                * Give the user a chance to override the per queue
+                * priorities.
+                */
+               if (cvmx_override_pko_queue_priority)
+                       cvmx_override_pko_queue_priority(ipd_port, priorities);
+
+               cvmx_pko_config_port(ipd_port,
+                                    cvmx_pko_get_base_queue(ipd_port),
+                                    cvmx_pko_get_num_queues(ipd_port),
+                                    priorities);
+               ipd_port++;
+       }
+       return 0;
+       /* NOTE:
+        * Now this function is called for all chips including 68xx,
+        * but on the 68xx it does not enable multiple pko_iports per
+        * eport, while before it was doing 3 pko_iport per eport
+        * buf the reason for that is not clear.
+        */
+}