]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
rockchip: rk3128: add device tree file
authorKever Yang <kever.yang@rock-chips.com>
Tue, 28 Nov 2017 08:04:15 +0000 (16:04 +0800)
committerPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Thu, 30 Nov 2017 21:55:26 +0000 (22:55 +0100)
Add dts binding header for rk3128, files origin from kernel.

Series-Changes: 2
- fix i2c address
- add saradc and usb phy node
- emmc using fifo mode for there is no dma support in rk3128 emmc
- add some clock id in cru.h

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
arch/arm/dts/Makefile
arch/arm/dts/rk3128-evb.dts [new file with mode: 0644]
arch/arm/dts/rk3128.dtsi [new file with mode: 0644]
include/dt-bindings/clock/rk3128-cru.h [new file with mode: 0644]

index 9db56f2d9dbc178c35cce6ead9b5401e7e341813..1518616bfb52f87836c3325c82b9abf5bd674196 100644 (file)
@@ -29,6 +29,7 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \
 dtb-$(CONFIG_EXYNOS7420) += exynos7420-espresso7420.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
        rk3036-sdk.dtb \
+       rk3128-evb.dtb \
        rk3188-radxarock.dtb \
        rk3288-evb.dtb \
        rk3288-fennec.dtb \
diff --git a/arch/arm/dts/rk3128-evb.dts b/arch/arm/dts/rk3128-evb.dts
new file mode 100644 (file)
index 0000000..6940af9
--- /dev/null
@@ -0,0 +1,95 @@
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "rk3128.dtsi"
+
+/ {
+       model = "Rockchip RK3128 Evaluation board";
+       compatible = "rockchip,rk3128-evb", "rockchip,rk3128";
+
+       chosen {
+               stdout-path = &uart2;
+       };
+
+       vcc5v0_otg: vcc5v0-otg-drv {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc5v0_otg";
+               gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&otg_vbus_drv>;
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+       };
+
+       vcc5v0_host: vcc5v0-host-drv {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc5v0_host";
+               gpio = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&host_vbus_drv>;
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               regulator-always-on;
+       };
+};
+
+&i2c1 {
+       status = "okay";
+
+       hym8563: hym8563@51 {
+               compatible = "haoyu,hym8563";
+               reg = <0x51>;
+               #clock-cells = <0>;
+               clock-frequency = <32768>;
+               clock-output-names = "xin32k";
+       };
+};
+
+&u2phy {
+       status = "okay";
+};
+
+&u2phy_otg {
+       status = "okay";
+};
+
+&u2phy_host {
+       status = "okay";
+};
+
+&usb_host_ehci {
+       status = "okay";
+};
+
+&usb_host_ohci {
+       status = "okay";
+};
+
+&usb_otg {
+       vbus-supply = <&vcc5v0_otg>;
+       status = "okay";
+};
+
+&emmc {
+       fifo-mode;
+       status = "okay";
+};
+
+&pinctrl {
+       usb_otg {
+               otg_vbus_drv: host-vbus-drv {
+                       rockchip,pins = <0 26 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+
+       usb_host {
+               host_vbus_drv: host-vbus-drv {
+                       rockchip,pins = <2 23 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+};
diff --git a/arch/arm/dts/rk3128.dtsi b/arch/arm/dts/rk3128.dtsi
new file mode 100644 (file)
index 0000000..3ef2737
--- /dev/null
@@ -0,0 +1,804 @@
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3128-cru.h>
+#include "skeleton.dtsi"
+
+/ {
+       compatible = "rockchip,rk3128";
+       rockchip,sram = <&sram>;
+       interrupt-parent = <&gic>;
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       aliases {
+               gpio0 = &gpio0;
+               gpio1 = &gpio1;
+               gpio2 = &gpio2;
+               gpio3 = &gpio3;
+               i2c0 = &i2c0;
+               i2c1 = &i2c1;
+               i2c2 = &i2c2;
+               i2c3 = &i2c3;
+               spi0 = &spi0;
+               serial0 = &uart0;
+               serial1 = &uart1;
+               serial2 = &uart2;
+               mmc0 = &emmc;
+               mmc1 = &sdmmc;
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <0x60000000 0x40000000>;
+       };
+
+       arm-pmu {
+               compatible = "arm,cortex-a7-pmu";
+               interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               enable-method = "rockchip,rk3128-smp";
+
+               cpu0:cpu@0x000 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a7";
+                       reg = <0x000>;
+                       operating-points = <
+                               /* KHz    uV */
+                                816000 1000000
+                       >;
+                       #cooling-cells = <2>; /* min followed by max */
+                       clock-latency = <40000>;
+                       clocks = <&cru ARMCLK>;
+               };
+
+               cpu1:cpu@0x001 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a7";
+                       reg = <0x001>;
+               };
+
+               cpu2:cpu@0x002 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a7";
+                       reg = <0x002>;
+               };
+
+               cpu3:cpu@0x003 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a7";
+                       reg = <0x003>;
+               };
+       };
+
+       cpu_axi_bus: cpu_axi_bus {
+               compatible = "rockchip,cpu_axi_bus";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               qos {
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges;
+
+                       crypto {
+                               reg = <0x10128080 0x20>;
+                       };
+
+                       core {
+                               reg = <0x1012a000 0x20>;
+                       };
+
+                       peri {
+                               reg = <0x1012c000 0x20>;
+                       };
+
+                       gpu {
+                               reg = <0x1012d000 0x20>;
+                       };
+
+                       vpu {
+                               reg = <0x1012e000 0x20>;
+                       };
+
+                       rga {
+                               reg = <0x1012f000 0x20>;
+                       };
+                       ebc {
+                               reg = <0x1012f080 0x20>;
+                       };
+
+                       iep {
+                               reg = <0x1012f100 0x20>;
+                       };
+
+                       lcdc {
+                               reg = <0x1012f180 0x20>;
+                               rockchip,priority = <3 3>;
+                       };
+
+                       vip {
+                               reg = <0x1012f200 0x20>;
+                               rockchip,priority = <3 3>;
+                       };
+               };
+
+               msch {
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges;
+
+                       msch@10128000 {
+                               reg = <0x10128000 0x20>;
+                               rockchip,read-latency = <0x3f>;
+                       };
+               };
+       };
+
+       psci {
+               compatible      = "arm,psci";
+               method          = "smc";
+               cpu_suspend     = <0x84000001>;
+               cpu_off         = <0x84000002>;
+               cpu_on          = <0x84000003>;
+               migrate         = <0x84000005>;
+       };
+
+       amba {
+               compatible = "arm,amba-bus";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               interrupt-parent = <&gic>;
+               ranges;
+
+               pdma: pdma@20078000 {
+                       compatible = "arm,pl330", "arm,primecell";
+                       reg = <0x20078000 0x4000>;
+                       arm,pl330-broken-no-flushp;//2
+                       interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+                       #dma-cells = <1>;
+                       clocks = <&cru ACLK_DMAC2>;
+                       clock-names = "apb_pclk";
+               };
+       };
+
+       xin24m: xin24m {
+               compatible = "fixed-clock";
+               clock-frequency = <24000000>;
+               clock-output-names = "xin24m";
+               #clock-cells = <0>;
+       };
+
+       xin12m: xin12m {
+               compatible = "fixed-clock";
+               clocks = <&xin24m>;
+               clock-frequency = <12000000>;
+               clock-output-names = "xin12m";
+               #clock-cells = <0>;
+       };
+
+       timer {
+               compatible = "arm,armv7-timer";
+               arm,cpu-registers-not-fw-configured;
+               interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+                            <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+               clock-frequency = <24000000>;
+       };
+
+       timer@20044000 {
+               compatible = "arm,armv7-timer";
+               reg = <0x20044000 0xb8>;
+               interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+               rockchip,broadcast = <1>;
+       };
+
+       watchdog: wdt@2004c000 {
+               compatible = "rockchip,watch dog";
+               reg = <0x2004c000 0x100>;
+               clock-names = "pclk_wdt";
+               interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+               rockchip,irq = <1>;
+               rockchip,timeout = <60>;
+               rockchip,atboot = <1>;
+               rockchip,debug = <0>;
+       };
+
+       reset: reset@20000110 {
+               compatible = "rockchip,reset";
+               reg = <0x20000110 0x24>;
+               #reset-cells = <1>;
+       };
+
+       nandc: nandc@10500000 {
+               compatible = "rockchip,rk-nandc";
+               reg = <0x10500000 0x4000>;
+               interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&nandc_ale &nandc_cle &nandc_wrn &nandc_rdn &nandc_rdy &nandc_cs0 &nandc_data>;
+               nandc_id = <0>;
+               clocks = <&cru SCLK_NANDC>,
+                        <&cru HCLK_NANDC>,
+                        <&cru SRST_NANDC>;
+               clock-names = "clk_nandc", "g_clk_nandc", "hclk_nandc";
+       };
+
+       dmc: dmc@20004000 {
+               u-boot,dm-pre-reloc;
+               compatible = "rockchip,rk3128-dmc", "syscon";
+               reg = <0x0 0x20004000 0x0 0x1000>;
+       };
+
+       cru: clock-controller@20000000 {
+               u-boot,dm-pre-reloc;
+               compatible = "rockchip,rk3128-cru";
+               reg = <0x20000000 0x1000>;
+               rockchip,grf = <&grf>;
+               #clock-cells = <1>;
+               #reset-cells = <1>;
+               assigned-clocks = <&cru PLL_GPLL>;
+               assigned-clock-rates = <594000000>;
+       };
+
+       uart0: serial0@20060000 {
+               compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
+               reg = <0x20060000 0x100>;
+               interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+               reg-shift = <2>;
+               reg-io-width = <4>;
+               clock-frequency = <24000000>;
+               clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+               clock-names = "baudclk", "apb_pclk";
+               pinctrl-names = "default";
+               pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+               dmas = <&pdma 2>, <&pdma 3>;
+               #dma-cells = <2>;
+       };
+
+       uart1: serial1@20064000 {
+               compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
+               reg = <0x20064000 0x100>;
+               interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+               reg-shift = <2>;
+               reg-io-width = <4>;
+               clock-frequency = <24000000>;
+               clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+               clock-names = "baudclk", "apb_pclk";
+               pinctrl-names = "default";
+               pinctrl-0 = <&uart1_xfer>;
+               dmas = <&pdma 4>, <&pdma 5>;
+               #dma-cells = <2>;
+       };
+
+       uart2: serial2@20068000 {
+               compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
+               reg = <0x20068000 0x100>;
+               interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+               reg-shift = <2>;
+               reg-io-width = <4>;
+               clock-frequency = <24000000>;
+               clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+               clock-names = "baudclk", "apb_pclk";
+               pinctrl-names = "default";
+               pinctrl-0 = <&uart2_xfer>;
+               dmas = <&pdma 6>, <&pdma 7>;
+               #dma-cells = <2>;
+       };
+
+       saradc: saradc@2006c000 {
+               compatible = "rockchip,saradc";
+               reg = <0x2006c000 0x100>;
+               interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+               #io-channel-cells = <1>;
+               clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+               clock-names = "saradc", "apb_pclk";
+               resets = <&cru SRST_SARADC>;
+               reset-names = "saradc-apb";
+               status = "disabled";
+       };
+
+       pwm0: pwm0@20050000 {
+               compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+               reg = <0x20050000 0x10>;
+               #pwm-cells = <2>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pwm0_pin>;
+               clocks = <&cru PCLK_PWM>;
+               clock-names = "pwm";
+       };
+
+       pwm1: pwm1@20050010 {
+               compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+               reg = <0x20050010 0x10>;
+               #pwm-cells = <2>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pwm1_pin>;
+               clocks = <&cru PCLK_PWM>;
+               clock-names = "pwm";
+       };
+
+       pwm2: pwm2@20050020 {
+               compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+               reg = <0x20050020 0x10>;
+               #pwm-cells = <2>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pwm2_pin>;
+               clocks = <&cru PCLK_PWM>;
+               clock-names = "pwm";
+       };
+
+       pwm3: pwm3@20050030 {
+               compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+               reg = <0x20050030 0x10>;
+               #pwm-cells = <2>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pwm3_pin>;
+               clocks = <&cru PCLK_PWM>;
+               clock-names = "pwm";
+       };
+
+       sram: sram@10080400 {
+               compatible = "rockchip,rk3128-smp-sram", "mmio-sram";
+               reg = <0x10080400 0x1C00>;
+               map-exec;
+               map-cacheable;
+       };
+
+       pmu: syscon@100a0000 {
+               compatible = "rockchip,rk3128-pmu", "syscon", "simple-mfd";
+               reg = <0x100a0000 0x1000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       gic: interrupt-controller@10139000 {
+               compatible = "arm,gic-400";
+               interrupt-controller;
+               #interrupt-cells = <3>;
+               #address-cells = <0>;
+               reg = <0x10139000 0x1000>,
+                     <0x1013a000 0x1000>,
+                     <0x1013c000 0x2000>,
+                     <0x1013e000 0x2000>;
+               interrupts = <GIC_PPI 9 0xf04>;
+       };
+
+       u2phy: usb2-phy {
+               compatible = "rockchip,rk3128-usb2phy";
+               reg = <0x017c 0x0c>;
+               rockchip,grf = <&grf>;
+               clocks = <&cru SCLK_OTGPHY0>;
+               clock-names = "phyclk";
+               #clock-cells = <0>;
+               clock-output-names = "usb480m_phy";
+               #phy-cells = <1>;
+               status = "disabled";
+
+               u2phy_otg: otg-port {
+                       #phy-cells = <0>;
+                       interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "otg-bvalid", "otg-id",
+                                         "linestate";
+                       status = "disabled";
+               };
+
+               u2phy_host: host-port {
+                       #phy-cells = <0>;
+                       interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "linestate";
+                       status = "disabled";
+               };
+       };
+
+       usb_otg: usb@10180000 {
+               compatible = "rockchip,rk3128-usb", "rockchip,rk3288-usb",
+                            "snps,dwc2";
+               reg = <0x10180000 0x40000>;
+               interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+               dr_mode = "otg";
+               g-use-dma;
+               hnp-srp-disable;
+               phys = <&u2phy 0>;
+               phy-names = "usb";
+               status = "disabled";
+       };
+
+       usb_host_ehci: usb@101c0000 {
+               compatible = "generic-ehci";
+               reg = <0x101c0000 0x20000>;
+               interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+               phys = <&u2phy 1>;
+               phy-names = "usb";
+               status = "disabled";
+       };
+
+       usb_host_ohci: usb@101e0000 {
+               compatible = "generic-ohci";
+               reg = <0x101e0000 0x20000>;
+               interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+               phys = <&u2phy 1>;
+               phy-names = "usb";
+               status = "disabled";
+       };
+
+       sdmmc: dwmmc@10214000 {
+               compatible = "rockchip,rk312x-dw-mshc", "rockchip,rk3288-dw-mshc";
+               reg = <0x10214000 0x4000>;
+               max-frequency = <150000000>;
+               interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+               clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+                        <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+               clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+               fifo-depth = <0x100>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+               bus-width = <4>;
+               status = "disabled";
+       };
+
+       emmc: dwmmc@1021c000 {
+               u-boot,dm-pre-reloc;
+               compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc";
+               reg = <0x1021c000 0x4000>;
+               max-frequency = <150000000>;
+               interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+               clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+                        <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+               clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+               bus-width = <8>;
+               default-sample-phase = <158>;
+               num-slots = <1>;
+               fifo-depth = <0x100>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+               resets = <&cru SRST_EMMC>;
+               reset-names = "reset";
+               status = "disabled";
+       };
+
+       i2c0: i2c0@20072000 {
+               compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+               reg = <20072000 0x1000>;
+               interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+               clock-names = "i2c";
+               clocks = <&cru PCLK_I2C0>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&i2c0_xfer>;
+       };
+
+       i2c1: i2c1@20056000 {
+               compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+               reg = <0x20056000 0x1000>;
+               interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+               clock-names = "i2c";
+               clocks = <&cru PCLK_I2C1>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&i2c1_xfer>;
+       };
+
+       i2c2: i2c2@2005a000 {
+               compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+               reg = <0x2005a000 0x1000>;
+               interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+               clock-names = "i2c";
+               clocks = <&cru PCLK_I2C2>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&i2c2_xfer>;
+       };
+
+       i2c3: i2c3@2005e000 {
+               compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+               reg = <0x2005e000 0x1000>;
+               interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+               clock-names = "i2c";
+               clocks = <&cru PCLK_I2C3>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&i2c3_xfer>;
+       };
+
+       spi0: spi@20074000 {
+               compatible = "rockchip,rk3128-spi", "rockchip,rk3288-spi";
+               reg = <0x20074000 0x1000>;
+               interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&spi0_txd_mux0 &spi0_rxd_mux0 &spi0_clk_mux0 &spi0_cs0_mux0 &spi0_cs1_mux0>;
+               rockchip,spi-src-clk = <0>;
+               num-cs = <2>;
+               clocks =<&cru SCLK_SPI>, <&cru PCLK_SPI>;
+               clock-names = "spi","pclk_spi0";
+               dmas = <&pdma 8>, <&pdma 9>;
+               #dma-cells = <2>;
+               dma-names = "tx", "rx";
+       };
+
+       grf: syscon@20008000 {
+               u-boot,dm-pre-reloc;
+               compatible = "rockchip,rk3128-grf", "syscon";
+               reg = <0x20008000 0x1000>;
+       };
+
+       pinctrl: pinctrl@20008000 {
+               compatible = "rockchip,rk3128-pinctrl";
+               reg = <0x20008000 0xA8>,
+                     <0x200080A8 0x4C>,
+                     <0x20008118 0x20>,
+                     <0x20008100 0x04>;
+               reg-names = "base", "mux", "pull", "drv";
+               rockchip,grf = <&grf>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               gpio0: gpio0@2007c000 {
+                       compatible = "rockchip,gpio-bank";
+                       reg = <0x2007c000 0x100>;
+                       interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&cru PCLK_GPIO0>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpio1: gpio1@20080000 {
+                       compatible = "rockchip,gpio-bank";
+                       reg = <0x20080000 0x100>;
+                       interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&cru PCLK_GPIO1>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpio2: gpio2@20084000 {
+                       compatible = "rockchip,gpio-bank";
+                       reg = <0x20084000 0x100>;
+                       interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&cru PCLK_GPIO2>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpio3: gpio2@20088000 {
+                       compatible = "rockchip,gpio-bank";
+                       reg = <0x20088000 0x100>;
+                       interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&cru PCLK_GPIO3>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               pcfg_pull_up: pcfg-pull-up {
+                       bias-pull-up;
+               };
+
+               pcfg_pull_down: pcfg-pull-down {
+                       bias-pull-down;
+               };
+
+               pcfg_pull_none: pcfg-pull-none {
+                       bias-disable;
+               };
+
+               emmc {
+                       /*
+                        * We run eMMC at max speed; bump up drive strength.
+                        * We also have external pulls, so disable the internal ones.
+                        */
+
+                       emmc_clk: emmc-clk {
+                               rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>;
+                       };
+
+                       emmc_cmd: emmc-cmd {
+                               rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+                       };
+
+                       emmc_pwren: emmc-pwren {
+                               rockchip,pins = <2 5 RK_FUNC_2 &pcfg_pull_none>;
+                       };
+
+                       emmc_bus8: emmc-bus8 {
+                               rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>,
+                                               <1 25 RK_FUNC_2 &pcfg_pull_none>,
+                                               <1 26 RK_FUNC_2 &pcfg_pull_none>,
+                                               <1 27 RK_FUNC_2 &pcfg_pull_none>,
+                                               <1 28 RK_FUNC_2 &pcfg_pull_none>,
+                                               <1 29 RK_FUNC_2 &pcfg_pull_none>,
+                                               <1 30 RK_FUNC_2 &pcfg_pull_none>,
+                                               <1 31 RK_FUNC_2 &pcfg_pull_none>;
+                       };
+               };
+
+               nandc{
+                       nandc_ale:nandc-ale {
+                               rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+                       };
+
+                       nandc_cle:nandc-cle {
+                               rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+                       };
+
+                       nandc_wrn:nandc-wrn {
+                               rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+                       };
+
+                       nandc_rdn:nandc-rdn {
+                               rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+                       };
+
+                       nandc_rdy:nandc-rdy {
+                               rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+                       };
+
+                       nandc_cs0:nandc-cs0 {
+                               rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+                       };
+
+                       nandc_data: nandc-data {
+                               rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+                       };
+               };
+
+               uart0 {
+                       uart0_xfer: uart0-xfer {
+                               rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_none>,
+                                               <0 17 RK_FUNC_1 &pcfg_pull_none>;
+                       };
+
+                       uart0_cts: uart0-cts {
+                               rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+                       };
+
+                       uart0_rts: uart0-rts {
+                               rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>;
+                       };
+               };
+
+               uart1 {
+                       uart1_xfer: uart1-xfer {
+                               rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_none>,
+                                               <2 23 RK_FUNC_1 &pcfg_pull_none>;
+                       };
+               };
+
+               uart2 {
+                       uart2_xfer: uart2-xfer {
+                               rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>,
+                               <1 19 RK_FUNC_2 &pcfg_pull_none>;
+                       };
+               };
+
+               sdmmc {
+                       sdmmc_clk: sdmmc-clk {
+                               rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>;
+                       };
+
+                       sdmmc_cmd: sdmmc-cmd {
+                               rockchip,pins = <1 RK_PC1 1 &pcfg_pull_up>;
+                       };
+
+                       sdmmc_wp: sdmmc-wp {
+                               rockchip,pins = <1 RK_PA7 1 &pcfg_pull_up>;
+                       };
+
+                       sdmmc_pwren: sdmmc-pwren {
+                               rockchip,pins = <1 RK_PB6 1 &pcfg_pull_up>;
+                       };
+
+                       sdmmc_bus4: sdmmc-bus4 {
+                               rockchip,pins = <1 RK_PC2 1 &pcfg_pull_up>,
+                                               <1 RK_PC3 1 &pcfg_pull_up>,
+                                               <1 RK_PC4 1 &pcfg_pull_up>,
+                                               <1 RK_PC5 1 &pcfg_pull_up>;
+                       };
+               };
+
+               pwm0 {
+                       pwm0_pin: pwm0-pin {
+                               rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+                       };
+               };
+
+               pwm1 {
+                       pwm1_pin: pwm1-pin {
+                               rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>;
+                       };
+               };
+
+               pwm2 {
+                       pwm2_pin: pwm2-pin {
+                               rockchip,pins = <0 1 2 &pcfg_pull_none>;
+                       };
+               };
+
+               pwm3 {
+                       pwm3_pin: pwm3-pin {
+                               rockchip,pins = <0 27 1 &pcfg_pull_none>;
+                       };
+               };
+
+               i2c0 {
+                       i2c0_xfer: i2c0-xfer {
+                               rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
+                                               <0 1 RK_FUNC_1 &pcfg_pull_none>;
+                       };
+               };
+
+               i2c1 {
+                       i2c1_xfer: i2c1-xfer {
+                               rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
+                                               <0 3 RK_FUNC_1 &pcfg_pull_none>;
+                       };
+               };
+
+               i2c2 {
+                       i2c2_xfer: i2c2-xfer {
+                               rockchip,pins = <2 20 3 &pcfg_pull_none>,
+                                               <2 21 3 &pcfg_pull_none>;
+                       };
+               };
+
+               i2c3 {
+                       i2c3_xfer: i2c3-xfer {
+                               rockchip,pins = <0 6 RK_FUNC_1 &pcfg_pull_none>,
+                                               <0 7 RK_FUNC_1 &pcfg_pull_none>;
+                       };
+               };
+
+               spi0 {
+                       spi0_txd_mux0:spi0-txd-mux0 {
+                               rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+                       };
+
+                       spi0_rxd_mux0:spi0-rxd-mux0 {
+                               rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+                       };
+
+                       spi0_clk_mux0:spi0-clk-mux0 {
+                               rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+                       };
+
+                       spi0_cs0_mux0:spi0-cs0-mux0 {
+                               rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+                       };
+
+                       spi0_cs1_mux0:spi0-cs1-mux0 {
+                               rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+                       };
+               };
+
+       };
+};
diff --git a/include/dt-bindings/clock/rk3128-cru.h b/include/dt-bindings/clock/rk3128-cru.h
new file mode 100644 (file)
index 0000000..476268a
--- /dev/null
@@ -0,0 +1,190 @@
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3128_H
+#define _DT_BINDINGS_CLK_ROCKCHIP_RK3128_H
+
+/* core clocks */
+#define PLL_APLL               1
+#define PLL_DPLL               2
+#define PLL_GPLL               3
+#define ARMCLK                 4
+
+/* sclk gates (special clocks) */
+#define SCLK_GPU               64
+#define SCLK_SPI               65
+#define SCLK_SDMMC             68
+#define SCLK_SDIO              69
+#define SCLK_EMMC              71
+#define SCLK_NANDC             76
+#define SCLK_UART0             77
+#define SCLK_UART1             78
+#define SCLK_UART2             79
+#define SCLK_I2S               82
+#define SCLK_SPDIF             83
+#define SCLK_TIMER0            85
+#define SCLK_TIMER1            86
+#define SCLK_TIMER2            87
+#define SCLK_TIMER3            88
+#define SCLK_SARADC            91
+#define SCLK_OTGPHY0           93
+#define SCLK_LCDC              100
+#define SCLK_HDMI              109
+#define SCLK_HEVC              111
+#define SCLK_I2S_OUT           113
+#define SCLK_SDMMC_DRV         114
+#define SCLK_SDIO_DRV          115
+#define SCLK_EMMC_DRV          117
+#define SCLK_SDMMC_SAMPLE      118
+#define SCLK_SDIO_SAMPLE       119
+#define SCLK_EMMC_SAMPLE       121
+#define SCLK_PVTM_CORE          123
+#define SCLK_PVTM_GPU           124
+#define SCLK_PVTM_VIDEO         125
+#define SCLK_MAC               151
+#define SCLK_MACREF            152
+#define SCLK_SFC               160
+
+#define DCLK_LCDC              190
+
+/* aclk gates */
+#define ACLK_DMAC2             194
+#define ACLK_VIO0              197
+#define ACLK_VIO1              203
+#define ACLK_VCODEC            208
+#define ACLK_CPU               209
+#define ACLK_PERI              210
+
+/* pclk gates */
+#define PCLK_SARADC            318
+#define PCLK_GPIO0             320
+#define PCLK_GPIO1             321
+#define PCLK_GPIO2             322
+#define PCLK_GPIO3             323
+#define PCLK_GRF               329
+#define PCLK_I2C0              332
+#define PCLK_I2C1              333
+#define PCLK_I2C2              334
+#define PCLK_I2C3              335
+#define PCLK_SPI               338
+#define PCLK_UART0             341
+#define PCLK_UART1             342
+#define PCLK_UART2             343
+#define PCLK_PWM               350
+#define PCLK_TIMER             353
+#define PCLK_HDMI              360
+#define PCLK_CPU               362
+#define PCLK_PERI              363
+#define PCLK_DDRUPCTL          364
+#define PCLK_WDT               368
+
+/* hclk gates */
+#define HCLK_OTG0              449
+#define HCLK_OTG1              450
+#define HCLK_NANDC             453
+#define HCLK_SDMMC             456
+#define HCLK_SDIO              457
+#define HCLK_EMMC              459
+#define HCLK_I2S               462
+#define HCLK_LCDC              465
+#define HCLK_ROM               467
+#define HCLK_VIO_BUS           472
+#define HCLK_VCODEC            476
+#define HCLK_CPU               477
+#define HCLK_PERI              478
+
+#define CLK_NR_CLKS            (HCLK_PERI + 1)
+
+/* soft-reset indices */
+#define SRST_CORE0             0
+#define SRST_CORE1             1
+#define SRST_CORE0_DBG         4
+#define SRST_CORE1_DBG         5
+#define SRST_CORE0_POR         8
+#define SRST_CORE1_POR         9
+#define SRST_L2C               12
+#define SRST_TOPDBG            13
+#define SRST_STRC_SYS_A                14
+#define SRST_PD_CORE_NIU       15
+
+#define SRST_TIMER2            16
+#define SRST_CPUSYS_H          17
+#define SRST_AHB2APB_H         19
+#define SRST_TIMER3            20
+#define SRST_INTMEM            21
+#define SRST_ROM               22
+#define SRST_PERI_NIU          23
+#define SRST_I2S               24
+#define SRST_DDR_PLL           25
+#define SRST_GPU_DLL           26
+#define SRST_TIMER0            27
+#define SRST_TIMER1            28
+#define SRST_CORE_DLL          29
+#define SRST_EFUSE_P           30
+#define SRST_ACODEC_P          31
+
+#define SRST_GPIO0             32
+#define SRST_GPIO1             33
+#define SRST_GPIO2             34
+#define SRST_UART0             39
+#define SRST_UART1             40
+#define SRST_UART2             41
+#define SRST_I2C0              43
+#define SRST_I2C1              44
+#define SRST_I2C2              45
+#define SRST_SFC               47
+
+#define SRST_PWM0              48
+#define SRST_DAP               51
+#define SRST_DAP_SYS           52
+#define SRST_GRF               55
+#define SRST_PERIPHSYS_A       57
+#define SRST_PERIPHSYS_H       58
+#define SRST_PERIPHSYS_P       59
+#define SRST_CPU_PERI          61
+#define SRST_EMEM_PERI         62
+#define SRST_USB_PERI          63
+
+#define SRST_DMA2              64
+#define SRST_MAC               66
+#define SRST_NANDC             68
+#define SRST_USBOTG0           69
+#define SRST_OTGC0             71
+#define SRST_USBOTG1           72
+#define SRST_OTGC1             74
+#define SRST_DDRMSCH           79
+
+#define SRST_MMC0              81
+#define SRST_SDIO              82
+#define SRST_EMMC              83
+#define SRST_SPI0              84
+#define SRST_WDT               86
+#define SRST_SARADC            87
+#define SRST_DDRPHY            88
+#define SRST_DDRPHY_P          89
+#define SRST_DDRCTRL           90
+#define SRST_DDRCTRL_P         91
+
+#define SRST_HDMI_P            96
+#define SRST_VIO_BUS_H         99
+#define SRST_UTMI0             103
+#define SRST_UTMI1             104
+#define SRST_USBPOR            105
+
+#define SRST_VCODEC_A          112
+#define SRST_VCODEC_H          113
+#define SRST_VIO1_A            114
+#define SRST_HEVC              115
+#define SRST_VCODEC_NIU_A      116
+#define SRST_LCDC1_A           117
+#define SRST_LCDC1_H           118
+#define SRST_LCDC1_D           119
+#define SRST_GPU               120
+#define SRST_GPU_NIU_A         122
+
+#define SRST_DBG_P             131
+
+#endif