arm: dts: k3: Add phy specific properties to SD card node

With changes in the driver requiring phy related properties,
add the same for the SD card node to prevent breaking boot with
the driver update.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
index e135cfbf682a70348607a02b78ec68725cafc926..71d6c319c2906847fe96d9fbc7a933968081ad64 100644 (file)
--- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
@@ -36,6 +36,8 @@
                clocks = <&k3_clks 48 1>;
                power-domains = <&k3_pds 48>;
                max-frequency = <25000000>;
+               ti,otap-del-sel = <0x2>;
+               ti,trm-icp = <0x8>;
        };
 
 };
@@ -328,6 +330,7 @@
        pinctrl-names = "default";
        pinctrl-0 = <&main_mmc1_pins_default>;
        sdhci-caps-mask = <0x7 0x0>;
+       ti,driver-strength-ohm = <50>;
 };
 
 &mcu_cpsw {

diff --git a/arch/arm/dts/k3-am654-r5-base-board.dts b/arch/arm/dts/k3-am654-r5-base-board.dts
index 1ca4757ca5eaf304660b11549201c32d9f401e39..8deda328d0c601a43ef6cc9e7fd155415f4430ab 100644 (file)
--- a/arch/arm/dts/k3-am654-r5-base-board.dts
+++ b/arch/arm/dts/k3-am654-r5-base-board.dts
@@ -174,4 +174,5 @@
        clock-names = "clk_xin";
        clocks = <&clk_200mhz>;
        /delete-property/ power-domains;
+       ti,driver-strength-ohm = <50>;
 };