CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NETCONSOLE=y
CONFIG_DM=y
+CONFIG_KIRKWOOD_GPIO=y
CONFIG_DM_PCA953X=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NETCONSOLE=y
CONFIG_DM=y
+CONFIG_KIRKWOOD_GPIO=y
CONFIG_DM_PCA953X=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SATA_MV=y
+CONFIG_KIRKWOOD_GPIO=y
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x0
CONFIG_ENV_IS_IN_NAND=y
CONFIG_NETCONSOLE=y
CONFIG_DM=y
+CONFIG_KIRKWOOD_GPIO=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SATA_MV=y
+CONFIG_KIRKWOOD_GPIO=y
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x0
CONFIG_NETCONSOLE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
+CONFIG_KIRKWOOD_GPIO=y
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_SOFT=y
CONFIG_SYS_I2C_SOFT_SLAVE=0x0
CONFIG_NETCONSOLE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
+CONFIG_KIRKWOOD_GPIO=y
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_SOFT=y
CONFIG_SYS_I2C_SOFT_SLAVE=0x0
CONFIG_NETCONSOLE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
+CONFIG_KIRKWOOD_GPIO=y
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_SOFT=y
CONFIG_SYS_I2C_SOFT_SLAVE=0x0
CONFIG_NETCONSOLE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
+CONFIG_KIRKWOOD_GPIO=y
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_SOFT=y
CONFIG_SYS_I2C_SOFT_SLAVE=0x0
CONFIG_NETCONSOLE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
+CONFIG_KIRKWOOD_GPIO=y
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_SOFT=y
CONFIG_SYS_I2C_SOFT_SLAVE=0x0
CONFIG_NETCONSOLE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
+CONFIG_KIRKWOOD_GPIO=y
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_SOFT=y
CONFIG_SYS_I2C_SOFT_SLAVE=0x0
CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SATA_MV=y
+CONFIG_KIRKWOOD_GPIO=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SATA_MV=y
+CONFIG_KIRKWOOD_GPIO=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NETCONSOLE=y
CONFIG_DM=y
+CONFIG_KIRKWOOD_GPIO=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SATA_MV=y
+CONFIG_KIRKWOOD_GPIO=y
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x0
CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SATA_MV=y
+CONFIG_KIRKWOOD_GPIO=y
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x0
CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SATA_MV=y
+CONFIG_KIRKWOOD_GPIO=y
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x0
CONFIG_DM=y
CONFIG_SATA_MV=y
CONFIG_BLK=y
+CONFIG_KIRKWOOD_GPIO=y
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x0
CONFIG_NETCONSOLE=y
CONFIG_DM=y
CONFIG_SATA_MV=y
+CONFIG_KIRKWOOD_GPIO=y
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x0
help
This driver supports CREG GPIOs on Synopsys HSDK SOC.
+config KIRKWOOD_GPIO
+ bool "Kirkwood GPIO driver"
+ help
+ This drdiver supports GPIOs on Kirkwood platforms
+
config LPC32XX_GPIO
bool "LPC32XX GPIO driver"
depends on DM
#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */
#define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 */
#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */
-#define CONFIG_KIRKWOOD_GPIO 1
/*
* NS16550 Configuration
#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */
#define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 */
#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */
-#define CONFIG_KIRKWOOD_GPIO 1
/*
* NS16550 Configuration
/*
* Enable GPI0 support
*/
-#define CONFIG_KIRKWOOD_GPIO
/*
* Environment variables configurations
#undef CONFIG_I2C_MVTWSI
#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_KIRKWOOD_GPIO /* Enable GPIO Support */
#define CONFIG_SYS_NUM_I2C_BUSES 6
#define CONFIG_SYS_I2C_MAX_HOPS 1
#define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \
/*
* Enable GPI0 support
*/
-#define CONFIG_KIRKWOOD_GPIO
/*
* Enable I2C support
* General configuration options
*/
-#define CONFIG_KIRKWOOD_GPIO
-
#include "mv-common.h"
/* loading initramfs images without uimage header */
* EFI partition
*/
-#define CONFIG_KIRKWOOD_GPIO
-
#endif /* _CONFIG_NAS220_H */
CONFIG_KEEP_SERVERADDR
CONFIG_KEY_REVOCATION
CONFIG_KIRKWOOD_EGIGA_INIT
-CONFIG_KIRKWOOD_GPIO
CONFIG_KIRKWOOD_PCIE_INIT
CONFIG_KIRKWOOD_RGMII_PAD_1V8
CONFIG_KM8321