configs: imx6-engicam: Update the recoveryboot setting

Since recovery boot on mmc can get the mmcpart and mmcroot
dynamically, drop the static definitions and handle it
properly.

Tested-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h
index 571852d803ad0c8539b8d9008e16429583f6807c..56b3c7503eb6121dfcd7f2b63577c08da40810aa 100644 (file)
--- a/include/configs/imx6-engicam.h
+++ b/include/configs/imx6-engicam.h
@@ -43,30 +43,20 @@
        "fdt_addr=" FDT_ADDR "\0" \
        "boot_fdt=try\0" \
        "mmcpart=1\0" \
-       "recovery_device=0\0" \
-       "recovery_part=2\0" \
-       "recovery_root=/dev/mmcblk0p2 rootwait rw\0" \
        "nandroot=ubi0:rootfs rootfstype=ubifs\0" \
        "mmcautodetect=yes\0" \
        "mmcargs=setenv bootargs console=${console},${baudrate} " \
                "root=${mmcroot}\0" \
-       "recovery_mmcargs= setenv bootargs console=${console},${baudrate} "\
-               "root=${recovery_root}\0" \
        "ubiargs=setenv bootargs console=${console},${baudrate} " \
                "ubi.mtd=5 root=${nandroot} ${mtdparts}\0" \
        "loadbootscript=" \
                "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
        "bootscript=echo Running bootscript from mmc ...; " \
                "source\0" \
-       "recovery_loadimage=ext2load mmc ${recovery_device}:${recovery_part} ${loadaddr} ${image}\0" \
-       "recovery_loadfdt=ext2load mmc ${recovery_device}:${recovery_part} ${fdt_addr} ${fdt_file}\0" \
        "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
        "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
        "loadfit=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${fit_image}\0" \
-       "altbootcmd=run recovery_boot\0"\
-       "recovery_boot=echo Recovery Boot from mmc ...; " \
-               "run recovery_loadimage ; run recovery_loadfdt; run recovery_mmcargs; "\
-               "bootm ${loadaddr} - ${fdt_addr}\0" \
+       "altbootcmd=run recoveryboot\0"\
        "fitboot=echo Booting FIT image from mmc ...; " \
                "run mmcargs; " \
                "bootm ${loadaddr}\0" \
@@ -108,7 +98,12 @@
                "run ubiargs; " \
                "nand read ${loadaddr} kernel 0x800000; " \
                "nand read ${fdt_addr} dtb 0x100000; " \
-               "bootm ${loadaddr} - ${fdt_addr}\0"
+               "bootm ${loadaddr} - ${fdt_addr}\0" \
+       "recoveryboot=if test ${modeboot} = mmcboot; then " \
+                       "run mmcboot; " \
+               "else " \
+                       "run nandboot; " \
+               "fi\0"
 
 #define CONFIG_BOOTCOMMAND             "run $modeboot"