ARM: OMAP3_LOGIC: Fix SPL Memory Map for Falcon Mode

The memory map defined in commit ("49c7303f0e52: OMAP3: Enable SPL
on omap3_logic) was used by a copy-paste of another board without
fully understanding how the map works in Falcon mode.  This patch
undoes the customization and uses the default SPL Memory Map
for OMAP3.

When building the uImage, set LOADADDR=0x82000000 and Falcon
mode should properly load.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index 0827ebedfd12d8bf557181550fb4531a63efb907..301d4b2002708c491f2a73d2a93bc292f71582dc 100644 (file)
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -15,19 +15,6 @@
 
 #define CONFIG_NR_DRAM_BANKS   2       /* CS1 may or may not be populated */
 
-/*
- * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
- * 64 bytes before this address should be set aside for u-boot.img's
- * header. That is 0x800FFFC0--0x80100000 should not be used for any
- * other needs.  We use this rather than the inherited defines from
- * ti_armv7_common.h for backwards compatibility.
- */
-#define CONFIG_SYS_TEXT_BASE           0x80100000
-#define CONFIG_SPL_BSS_START_ADDR      0x80000000
-#define CONFIG_SPL_BSS_MAX_SIZE                (512 << 10)     /* 512 KB */
-#define CONFIG_SYS_SPL_MALLOC_START    0x80208000
-#define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000
-
 #include <configs/ti_omap3_common.h>
 
 /*