fdt: Build a U-Boot binary without device tree

At present u-boot.bin holds the plain U-Boot binary without the device tree.
This is somewhat annoying since you need either u-boot.bin or u-boot-dtb.bin
depending on whether device tree is used.

Adjust the build such that u-boot.bin includes a device tree (if enabled),
and the plain binary is in u-boot-nodtb.bin. For now u-boot-dtb.bin remains
the same.

This should be acceptable since:

- without OF_CONTROL, u-boot.bin still does not include a device tree
- with OF_CONTROL, u-boot-dtb.bin does not change

The main impact is build systems which are set up to use u-boot.bin as
the output file and then add a device tree. These will have to change to use
u-boot-nodtb.bin instead.

Adjust tegra rules so it continues to produce the correct files.

Tested-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

diff --git a/Makefile b/Makefile
index dbb914a148dfd5d6ada37bd6022c4c64e9b958ac..67824ac61ed0e1ede09b3570084dbf04a26706bb 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -747,7 +747,7 @@ endif
 ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
 ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
 ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
-ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb u-boot-dtb.bin
+ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb
 ifeq ($(CONFIG_SPL_FRAMEWORK),y)
 ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
 endif
@@ -823,15 +823,23 @@ PHONY += dtbs
 dtbs dts/dt.dtb: checkdtc u-boot
        $(Q)$(MAKE) $(build)=dts dtbs
 
-u-boot-dtb.bin: u-boot.bin dts/dt.dtb FORCE
+quiet_cmd_copy = COPY    $@
+      cmd_copy = cp $< $@
+
+ifeq ($(CONFIG_OF_SEPARATE),y)
+u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
        $(call if_changed,cat)
 
+u-boot.bin: u-boot-dtb.bin FORCE
+       $(call if_changed,copy)
+else
+u-boot.bin: u-boot-nodtb.bin FORCE
+       $(call if_changed,copy)
+endif
+
 %.imx: %.bin
        $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
 
-quiet_cmd_copy = COPY    $@
-      cmd_copy = cp $< $@
-
 u-boot.dtb: dts/dt.dtb
        $(call cmd,copy)
 
@@ -842,11 +850,11 @@ OBJCOPYFLAGS_u-boot.srec := -O srec
 u-boot.hex u-boot.srec: u-boot FORCE
        $(call if_changed,objcopy)
 
-OBJCOPYFLAGS_u-boot.bin := -O binary \
+OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
                $(if $(CONFIG_X86_RESET_VECTOR),-R .start16 -R .resetvec)
 
-binary_size_check: u-boot.bin FORCE
-       @file_size=$(shell wc -c u-boot.bin | awk '{print $$1}') ; \
+binary_size_check: u-boot-nodtb.bin FORCE
+       @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
        map_size=$(shell cat u-boot.map | \
                awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
                | sed 's/0X//g' \
@@ -854,12 +862,12 @@ binary_size_check: u-boot.bin FORCE
        if [ "" != "$$map_size" ]; then \
                if test $$map_size -ne $$file_size; then \
                        echo "u-boot.map shows a binary size of $$map_size" >&2 ; \
-                       echo "  but u-boot.bin shows $$file_size" >&2 ; \
+                       echo "  but u-boot-nodtb.bin shows $$file_size" >&2 ; \
                        exit 1; \
                fi \
        fi
 
-u-boot.bin: u-boot FORCE
+u-boot-nodtb.bin: u-boot FORCE
        $(call if_changed,objcopy)
        $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE))
        $(BOARD_SIZE_CHECK)
@@ -1018,7 +1026,7 @@ rom: u-boot.rom FORCE
 IFDTOOL=$(objtree)/tools/ifdtool
 IFDTOOL_FLAGS  = -f 0:$(objtree)/u-boot.dtb
 IFDTOOL_FLAGS += -m 0x$(shell $(NM) u-boot |grep _dt_ucode_base_size |cut -d' ' -f1)
-IFDTOOL_FLAGS += -U $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot.bin
+IFDTOOL_FLAGS += -U $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot-nodtb.bin
 IFDTOOL_FLAGS += -w $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin
 IFDTOOL_FLAGS += -C
 
@@ -1069,7 +1077,7 @@ endif
 
 ifneq ($(CONFIG_TEGRA),)
 OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
-u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
+u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot-nodtb.bin FORCE
        $(call if_changed,pad_cat)
 
 OBJCOPYFLAGS_u-boot-dtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)