arm: dts: k3-am625-beagleplay-u-boot: drop duplicate bootph-nodes

Kernel dts import now provides bootph-all and bootph-pre-ram properties
for the properties we have been overriding so far. Drop the same.

Reviewed-by: Dhruva Gole <d-gole@ti.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>

diff --git a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
index ad5487c45b8f0479c85d39a1ba01ddb74684583e..a723caa580549981859de115121191673f8f897a 100644 (file)
--- a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
+++ b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
@@ -13,36 +13,26 @@
                tick-timer = &main_timer0;
        };
 
-       memory@80000000 {
-               bootph-all;
-       };
-
        /* Keep the LEDs on by default to indicate life */
        leds {
-               bootph-all;
                led-0 {
                        default-state = "on";
-                       bootph-all;
                };
 
                led-1 {
                        default-state = "on";
-                       bootph-all;
                };
 
                led-2 {
                        default-state = "on";
-                       bootph-all;
                };
 
                led-3 {
                        default-state = "on";
-                       bootph-all;
                };
 
                led-4 {
                        default-state = "on";
-                       bootph-all;
                };
        };
 };
@@ -58,45 +48,7 @@
        };
 };
 
-&main_uart0 {
-       bootph-all;
-};
-
-&console_pins_default {
-       bootph-all;
-};
-
-&main_i2c0 {
-       bootph-all;
-};
-
-&local_i2c_pins_default {
-       bootph-all;
-};
-
-&gpio0_pins_default {
-       bootph-all;
-};
-
-&main_gpio0 {
-       bootph-all;
-};
-
-&main_gpio1 {
-       bootph-all;
-};
-
-&sdhci0 {
-       /* EMMC */
-       bootph-all;
-};
-
-&emmc_pins_default {
-       bootph-all;
-};
-
 &sd_pins_default {
-       bootph-all;
        /* Force to use SDCD card detect pin */
        pinctrl-single,pins = <
                AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
@@ -109,14 +61,6 @@
        >;
 };
 
-&tps65219 {
-       bootph-all;
-};
-
-&sdhci1 {
-       bootph-all;
-};
-
 #ifdef CONFIG_TARGET_AM625_A53_BEAGLEPLAY
 
 #define SPL_NODTB "spl/u-boot-spl-nodtb.bin"