BOOTDEVICE
M: Simon Glass <sjg@chromium.org>
S: Maintained
+F: boot/bootmeth*.c
F: boot/bootdev*.c
F: boot/bootstd.c
F: include/bootdev*.h
F: include/bootflow.h
+F: include/bootmeth.h
F: include/bootstd.h
BTRFS
obj-$(CONFIG_ANDROID_BOOT_IMAGE) += image-android.o image-android-dt.o
obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += bootdev-uclass.o
+obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += bootmeth-uclass.o
obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += bootstd-uclass.o
obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += image-fdt.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#define LOG_CATEGORY UCLASS_BOOTSTD
+
+#include <common.h>
+#include <blk.h>
+#include <bootflow.h>
+#include <bootmeth.h>
+#include <bootstd.h>
+#include <dm.h>
+#include <env_internal.h>
+#include <fs.h>
+#include <malloc.h>
+#include <mapmem.h>
+#include <dm/uclass-internal.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int bootmeth_check(struct udevice *dev, struct bootflow_iter *iter)
+{
+ const struct bootmeth_ops *ops = bootmeth_get_ops(dev);
+
+ if (!ops->check)
+ return 0;
+
+ return ops->check(dev, iter);
+}
+
+int bootmeth_read_bootflow(struct udevice *dev, struct bootflow *bflow)
+{
+ const struct bootmeth_ops *ops = bootmeth_get_ops(dev);
+
+ if (!ops->read_bootflow)
+ return -ENOSYS;
+
+ return ops->read_bootflow(dev, bflow);
+}
+
+int bootmeth_boot(struct udevice *dev, struct bootflow *bflow)
+{
+ const struct bootmeth_ops *ops = bootmeth_get_ops(dev);
+
+ if (!ops->boot)
+ return -ENOSYS;
+
+ return ops->boot(dev, bflow);
+}
+
+int bootmeth_read_file(struct udevice *dev, struct bootflow *bflow,
+ const char *file_path, ulong addr, ulong *sizep)
+{
+ const struct bootmeth_ops *ops = bootmeth_get_ops(dev);
+
+ if (!ops->read_file)
+ return -ENOSYS;
+
+ return ops->read_file(dev, bflow, file_path, addr, sizep);
+}
+
+/**
+ * bootmeth_setup_iter_order() - Set up the ordering of bootmeths to scan
+ *
+ * This sets up the ordering information in @iter, based on the selected
+ * ordering of the bootmethds in bootstd_priv->bootmeth_order. If there is no
+ * ordering there, then all bootmethods are added
+ *
+ * @iter: Iterator to update with the order
+ * Return: 0 if OK, -ENOENT if no bootdevs, -ENOMEM if out of memory, other -ve
+ * on other error
+ */
+int bootmeth_setup_iter_order(struct bootflow_iter *iter)
+{
+ struct bootstd_priv *std;
+ struct udevice **order;
+ int count;
+ int ret;
+
+ ret = bootstd_get_priv(&std);
+ if (ret)
+ return ret;
+
+ /* Create an array large enough */
+ count = std->bootmeth_count ? std->bootmeth_count :
+ uclass_id_count(UCLASS_BOOTMETH);
+ if (!count)
+ return log_msg_ret("count", -ENOENT);
+
+ order = calloc(count, sizeof(struct udevice *));
+ if (!order)
+ return log_msg_ret("order", -ENOMEM);
+
+ /* If we have an ordering, copy it */
+ if (IS_ENABLED(CONFIG_BOOTSTD_FULL) && std->bootmeth_count) {
+ memcpy(order, std->bootmeth_order,
+ count * sizeof(struct bootmeth *));
+ } else {
+ struct udevice *dev;
+ int i, upto;
+
+ /*
+ * Get a list of bootmethods, in seq order (i.e. using aliases).
+ * There may be gaps so try to count up high enough to find them
+ * all.
+ */
+ for (i = 0, upto = 0; upto < count && i < 20 + count * 2; i++) {
+ ret = uclass_get_device_by_seq(UCLASS_BOOTMETH, i,
+ &dev);
+ if (!ret)
+ order[upto++] = dev;
+ }
+ count = upto;
+ }
+
+ iter->method_order = order;
+ iter->num_methods = count;
+ iter->cur_method = 0;
+
+ return 0;
+}
+
+int bootmeth_set_order(const char *order_str)
+{
+ struct bootstd_priv *std;
+ struct udevice **order;
+ int count, ret, i, len;
+ const char *s, *p;
+
+ ret = bootstd_get_priv(&std);
+ if (ret)
+ return ret;
+
+ if (!order_str) {
+ free(std->bootmeth_order);
+ std->bootmeth_order = NULL;
+ std->bootmeth_count = 0;
+ return 0;
+ }
+
+ /* Create an array large enough */
+ count = uclass_id_count(UCLASS_BOOTMETH);
+ if (!count)
+ return log_msg_ret("count", -ENOENT);
+
+ order = calloc(count + 1, sizeof(struct udevice *));
+ if (!order)
+ return log_msg_ret("order", -ENOMEM);
+
+ for (i = 0, s = order_str; *s && i < count; s = p + (*p == ' '), i++) {
+ struct udevice *dev;
+
+ p = strchrnul(s, ' ');
+ len = p - s;
+ ret = uclass_find_device_by_namelen(UCLASS_BOOTMETH, s, len,
+ &dev);
+ if (ret) {
+ printf("Unknown bootmeth '%.*s'\n", len, s);
+ free(order);
+ return ret;
+ }
+ order[i] = dev;
+ }
+ order[i] = NULL;
+ free(std->bootmeth_order);
+ std->bootmeth_order = order;
+ std->bootmeth_count = i;
+
+ return 0;
+}
+
+/**
+ * setup_fs() - Set up read to read a file
+ *
+ * We must redo the setup before each filesystem operation. This function
+ * handles that, including setting the filesystem type if a block device is not
+ * being used
+ *
+ * @bflow: Information about file to try
+ * @desc: Block descriptor to read from (NULL if not a block device)
+ * Return: 0 if OK, -ve on error
+ */
+static int setup_fs(struct bootflow *bflow, struct blk_desc *desc)
+{
+ int ret;
+
+ if (desc) {
+ ret = fs_set_blk_dev_with_part(desc, bflow->part);
+ if (ret)
+ return log_msg_ret("set", ret);
+ } else if (IS_ENABLED(CONFIG_BOOTSTD_FULL) && bflow->fs_type) {
+ fs_set_type(bflow->fs_type);
+ }
+
+ return 0;
+}
+
+int bootmeth_try_file(struct bootflow *bflow, struct blk_desc *desc,
+ const char *prefix, const char *fname)
+{
+ char path[200];
+ loff_t size;
+ int ret, ret2;
+
+ snprintf(path, sizeof(path), "%s%s", prefix ? prefix : "", fname);
+ log_debug("trying: %s\n", path);
+
+ free(bflow->fname);
+ bflow->fname = strdup(path);
+ if (!bflow->fname)
+ return log_msg_ret("name", -ENOMEM);
+
+ if (IS_ENABLED(CONFIG_BOOTSTD_FULL) && bflow->fs_type)
+ fs_set_type(bflow->fs_type);
+
+ ret = fs_size(path, &size);
+ log_debug(" %s - err=%d\n", path, ret);
+
+ /* Sadly FS closes the file after fs_size() so we must redo this */
+ ret2 = setup_fs(bflow, desc);
+ if (ret2)
+ return log_msg_ret("fs", ret2);
+
+ if (ret)
+ return log_msg_ret("size", ret);
+
+ bflow->size = size;
+ bflow->state = BOOTFLOWST_FILE;
+
+ return 0;
+}
+
+int bootmeth_alloc_file(struct bootflow *bflow, uint size_limit, uint align)
+{
+ loff_t bytes_read;
+ ulong addr;
+ char *buf;
+ uint size;
+ int ret;
+
+ size = bflow->size;
+ log_debug(" - script file size %x\n", size);
+ if (size > size_limit)
+ return log_msg_ret("chk", -E2BIG);
+
+ buf = memalign(align, size + 1);
+ if (!buf)
+ return log_msg_ret("buf", -ENOMEM);
+ addr = map_to_sysmem(buf);
+
+ ret = fs_read(bflow->fname, addr, 0, 0, &bytes_read);
+ if (ret) {
+ free(buf);
+ return log_msg_ret("read", ret);
+ }
+ if (size != bytes_read)
+ return log_msg_ret("bread", -EINVAL);
+ buf[size] = '\0';
+ bflow->state = BOOTFLOWST_READY;
+ bflow->buf = buf;
+
+ return 0;
+}
+
+int bootmeth_common_read_file(struct udevice *dev, struct bootflow *bflow,
+ const char *file_path, ulong addr, ulong *sizep)
+{
+ struct blk_desc *desc = NULL;
+ loff_t len_read;
+ loff_t size;
+ int ret;
+
+ if (bflow->blk)
+ desc = dev_get_uclass_plat(bflow->blk);
+
+ ret = setup_fs(bflow, desc);
+ if (ret)
+ return log_msg_ret("fs", ret);
+
+ ret = fs_size(file_path, &size);
+ if (ret)
+ return log_msg_ret("size", ret);
+ if (size > *sizep)
+ return log_msg_ret("spc", -ENOSPC);
+
+ ret = setup_fs(bflow, desc);
+ if (ret)
+ return log_msg_ret("fs", ret);
+
+ ret = fs_read(file_path, addr, 0, 0, &len_read);
+ if (ret)
+ return ret;
+ *sizep = len_read;
+
+ return 0;
+}
+
+#ifdef CONFIG_BOOTSTD_FULL
+/**
+ * on_bootmeths() - Update the bootmeth order
+ *
+ * This will check for a valid baudrate and only apply it if valid.
+ */
+static int on_bootmeths(const char *name, const char *value, enum env_op op,
+ int flags)
+{
+ int ret;
+
+ switch (op) {
+ case env_op_create:
+ case env_op_overwrite:
+ ret = bootmeth_set_order(value);
+ if (ret)
+ return 1;
+ return 0;
+ case env_op_delete:
+ bootmeth_set_order(NULL);
+ fallthrough;
+ default:
+ return 0;
+ }
+}
+U_BOOT_ENV_CALLBACK(bootmeths, on_bootmeths);
+#endif /* CONFIG_BOOTSTD_FULL */
+
+UCLASS_DRIVER(bootmeth) = {
+ .id = UCLASS_BOOTMETH,
+ .name = "bootmeth",
+ .flags = DM_UC_FLAG_SEQ_ALIAS,
+ .per_device_plat_auto = sizeof(struct bootmeth_uc_plat),
+};
/* For now, bind the boormethod device if none are found in the devicetree */
int dm_scan_other(bool pre_reloc_only)
{
- struct udevice *bootstd;
- int ret;
+ struct driver *drv = ll_entry_start(struct driver, driver);
+ const int n_ents = ll_entry_count(struct driver, driver);
+ struct udevice *dev, *bootstd;
+ int i, ret;
/* These are not needed before relocation */
if (!(gd->flags & GD_FLG_RELOC))
return log_msg_ret("bootstd", ret);
}
+ /* If there are no bootmeth devices, create them */
+ uclass_find_first_device(UCLASS_BOOTMETH, &dev);
+ if (dev)
+ return 0;
+
+ for (i = 0; i < n_ents; i++, drv++) {
+ /*
+ * Disable EFI Manager for now as no one uses it so it is
+ * confusing
+ */
+ if (drv->id == UCLASS_BOOTMETH &&
+ strcmp("efi_mgr_bootmeth", drv->name)) {
+ const char *name = drv->name;
+
+ if (!strncmp("bootmeth_", name, 9))
+ name += 9;
+ ret = device_bind(bootstd, drv, name, 0, ofnode_null(),
+ &dev);
+ if (ret)
+ return log_msg_ret("meth", ret);
+ }
+ }
+
return 0;
}
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2021 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#ifndef __bootmeth_h
+#define __bootmeth_h
+
+struct blk_desc;
+struct bootflow;
+struct bootflow_iter;
+struct udevice;
+
+/**
+ * struct bootmeth_uc_plat - information the uclass keeps about each bootmeth
+ *
+ * @desc: A long description of the bootmeth
+ */
+struct bootmeth_uc_plat {
+ const char *desc;
+};
+
+/** struct bootmeth_ops - Operations for boot methods */
+struct bootmeth_ops {
+ /**
+ * check_supported() - check if a bootmeth supports this bootflow
+ *
+ * This is optional. If not provided, the bootdev is assumed to be
+ * supported
+ *
+ * The bootmeth can check the bootdev (e.g. to make sure it is a
+ * network device) or the partition information. The following fields
+ * in @iter are available:
+ *
+ * name, dev, state, part
+ * max_part may be set if part != 0 (i.e. there is a valid partition
+ * table). Otherwise max_part is 0
+ * method is available but is the same as @dev
+ * the partition has not yet been read, nor has the filesystem been
+ * checked
+ *
+ * It may update only the flags in @iter
+ *
+ * @dev: Bootmethod device to check against
+ * @iter: On entry, provides bootdev, hwpart, part
+ * Return: 0 if OK, -ENOTSUPP if this bootdev is not supported
+ */
+ int (*check)(struct udevice *dev, struct bootflow_iter *iter);
+
+ /**
+ * read_bootflow() - read a bootflow for a device
+ *
+ * @dev: Bootmethod device to use
+ * @bflow: On entry, provides dev, hwpart, part and method.
+ * Returns updated bootflow if found
+ * Return: 0 if OK, -ve on error
+ */
+ int (*read_bootflow)(struct udevice *dev, struct bootflow *bflow);
+
+ /**
+ * read_file() - read a file needed for a bootflow
+ *
+ * Read a file from the same place as the bootflow came from
+ *
+ * @dev: Bootmethod device to use
+ * @bflow: Bootflow providing info on where to read from
+ * @file_path: Path to file (may be absolute or relative)
+ * @addr: Address to load file
+ * @sizep: On entry provides the maximum permitted size; on exit
+ * returns the size of the file
+ * Return: 0 if OK, -ENOSPC if the file is too large for @sizep, other
+ * -ve value if something else goes wrong
+ */
+ int (*read_file)(struct udevice *dev, struct bootflow *bflow,
+ const char *file_path, ulong addr, ulong *sizep);
+
+ /**
+ * boot() - boot a bootflow
+ *
+ * @dev: Bootmethod device to boot
+ * @bflow: Bootflow to boot
+ * Return: does not return on success, since it should boot the
+ * Operating Systemn. Returns -EFAULT if that fails, -ENOTSUPP if
+ * trying method resulted in finding out that is not actually
+ * supported for this boot and should not be tried again unless
+ * something changes, other -ve on other error
+ */
+ int (*boot)(struct udevice *dev, struct bootflow *bflow);
+};
+
+#define bootmeth_get_ops(dev) ((struct bootmeth_ops *)(dev)->driver->ops)
+
+/**
+ * bootmeth_check() - check if a bootmeth supports this bootflow
+ *
+ * This is optional. If not provided, the bootdev is assumed to be
+ * supported
+ *
+ * The bootmeth can check the bootdev (e.g. to make sure it is a
+ * network device) or the partition information. The following fields
+ * in @iter are available:
+ *
+ * name, dev, state, part
+ * max_part may be set if part != 0 (i.e. there is a valid partition
+ * table). Otherwise max_part is 0
+ * method is available but is the same as @dev
+ * the partition has not yet been read, nor has the filesystem been
+ * checked
+ *
+ * It may update only the flags in @iter
+ *
+ * @dev: Bootmethod device to check against
+ * @iter: On entry, provides bootdev, hwpart, part
+ * Return: 0 if OK, -ENOTSUPP if this bootdev is not supported
+ */
+int bootmeth_check(struct udevice *dev, struct bootflow_iter *iter);
+
+/**
+ * bootmeth_read_bootflow() - set up a bootflow for a device
+ *
+ * @dev: Bootmethod device to check
+ * @bflow: On entry, provides dev, hwpart, part and method.
+ * Returns updated bootflow if found
+ * Return: 0 if OK, -ve on error
+ */
+int bootmeth_read_bootflow(struct udevice *dev, struct bootflow *bflow);
+
+/**
+ * bootmeth_read_file() - read a file needed for a bootflow
+ *
+ * Read a file from the same place as the bootflow came from
+ *
+ * @dev: Bootmethod device to use
+ * @bflow: Bootflow providing info on where to read from
+ * @file_path: Path to file (may be absolute or relative)
+ * @addr: Address to load file
+ * @sizep: On entry provides the maximum permitted size; on exit
+ * returns the size of the file
+ * Return: 0 if OK, -ENOSPC if the file is too large for @sizep, other
+ * -ve value if something else goes wrong
+ */
+int bootmeth_read_file(struct udevice *dev, struct bootflow *bflow,
+ const char *file_path, ulong addr, ulong *sizep);
+
+/**
+ * bootmeth_boot() - boot a bootflow
+ *
+ * @dev: Bootmethod device to boot
+ * @bflow: Bootflow to boot
+ * Return: does not return on success, since it should boot the
+ * Operating Systemn. Returns -EFAULT if that fails, other -ve on
+ * other error
+ */
+int bootmeth_boot(struct udevice *dev, struct bootflow *bflow);
+
+/**
+ * bootmeth_setup_iter_order() - Set up the ordering of bootmeths to scan
+ *
+ * This sets up the ordering information in @iter, based on the selected
+ * ordering of the bootmethds in bootstd_priv->bootmeth_order. If there is no
+ * ordering there, then all bootmethods are added
+ *
+ * @iter: Iterator to update with the order
+ * Return: 0 if OK, -ENOENT if no bootdevs, -ENOMEM if out of memory, other -ve
+ * on other error
+ */
+int bootmeth_setup_iter_order(struct bootflow_iter *iter);
+
+/**
+ * bootmeth_set_order() - Set the bootmeth order
+ *
+ * This selects the ordering to use for bootmeths
+ *
+ * @order_str: String containing the ordering. This is a comma-separate list of
+ * bootmeth-device names, e.g. "syslinux,efi". If empty then a default ordering
+ * is used, based on the sequence number of devices (i.e. using aliases)
+ * Return: 0 if OK, -ENODEV if an unknown bootmeth is mentioned, -ENOMEM if
+ * out of memory, -ENOENT if there are no bootmeth devices
+ */
+int bootmeth_set_order(const char *order_str);
+
+/**
+ * bootmeth_try_file() - See we can access a given file
+ *
+ * Check for a file with a given name. If found, the filename is allocated in
+ * @bflow
+ *
+ * Sets the state to BOOTFLOWST_FILE on success. It also calls
+ * fs_set_blk_dev_with_part() so that this does not need to be done by the
+ * caller before reading the file.
+ *
+ * @bflow: Information about file to try
+ * @desc: Block descriptor to read from
+ * @prefix: Filename prefix to prepend to @fname (NULL for none)
+ * @fname: Filename to read
+ * Return: 0 if OK, -ENOMEM if not enough memory to allocate bflow->fname,
+ * other -ve value on other error
+ */
+int bootmeth_try_file(struct bootflow *bflow, struct blk_desc *desc,
+ const char *prefix, const char *fname);
+
+/**
+ * bootmeth_alloc_file() - Allocate and read a bootflow file
+ *
+ * Allocates memory for a bootflow file and reads it in. Sets the state to
+ * BOOTFLOWST_READY on success
+ *
+ * Note that fs_set_blk_dev_with_part() must have been called previously.
+ *
+ * @bflow: Information about file to read
+ * @size_limit: Maximum file size to permit
+ * @align: Allocation alignment (1 for unaligned)
+ * Return: 0 if OK, -E2BIG if file is too large, -ENOMEM if out of memory,
+ * other -ve on other error
+ */
+int bootmeth_alloc_file(struct bootflow *bflow, uint size_limit, uint align);
+
+/**
+ * bootmeth_common_read_file() - Common handler for reading a file
+ *
+ * Reads a named file from the same location as the bootflow file.
+ *
+ * @dev: bootmeth device to read from
+ * @bflow: Bootflow information
+ * @file_path: Path to file
+ * @addr: Address to load file to
+ * @sizep: On entry, the maximum file size to accept, on exit the actual file
+ * size read
+ */
+int bootmeth_common_read_file(struct udevice *dev, struct bootflow *bflow,
+ const char *file_path, ulong addr, ulong *sizep);
+
+#endif
UCLASS_BLK, /* Block device */
UCLASS_BOOTCOUNT, /* Bootcount backing store */
UCLASS_BOOTDEV, /* Boot device for locating an OS to boot */
+ UCLASS_BOOTMETH, /* Bootmethod for booting an OS */
UCLASS_BOOTSTD, /* Standard boot driver */
UCLASS_BUTTON, /* Button */
UCLASS_CACHE, /* Cache controller */
#define NET_CALLBACKS
#endif
+#ifdef CONFIG_BOOTSTD
+#define BOOTSTD_CALLBACK "bootmeths:bootmeths,"
+#else
+#define BOOTSTD_CALLBACK
+#endif
+
/*
* This list of callback bindings is static, but may be overridden by defining
* a new association in the ".callbacks" environment variable.
ENV_DOT_ESCAPE ENV_FLAGS_VAR ":flags," \
"baudrate:baudrate," \
NET_CALLBACKS \
+ BOOTSTD_CALLBACK \
"loadaddr:loadaddr," \
SILENT_CALLBACK \
SPLASHIMAGE_CALLBACK \
projects / u-boot.git / commitdiff
