]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
arm64: allwinner: sun50i: Sync H6 dts(i) files from Linux
authorJagan Teki <jagan@amarulasolutions.com>
Sun, 14 Apr 2019 16:52:21 +0000 (22:22 +0530)
committerJagan Teki <jagan@amarulasolutions.com>
Sun, 14 Apr 2019 17:02:32 +0000 (22:32 +0530)
Usually the Linux dts changes were synced in specific tags in Allwinner,
to keep track for whats been synced so-far and plan for future syncs.

But this patch sync sun50i-h6* dts(i) files from Linux w/o any specific
tag since these dts(i) changes are required for new H6 boards support.

Linux commit details about the sun50i-h6* sync:
"arm64: dts: allwinner: h6: move MMC pinctrl to dtsi"
(sha1: 6ba2e45d57afdfd982d12f168edd6a79a65075d8)

Linux commit details about the sun8i-tcon-top.h sync:
"dt-bindings: display: sunxi-drm: Add TCON TOP description"
(sha1: 59a9c39544cd1e5952c2a33028d71aa8180648f8)

Part of the sync initiated by 'Clément Péron'.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
arch/arm/dts/sun50i-h6-orangepi.dtsi
arch/arm/dts/sun50i-h6-pine-h64.dts
arch/arm/dts/sun50i-h6.dtsi
include/dt-bindings/clock/sun8i-tcon-top.h [new file with mode: 0644]

index 0612c19cd9943427a0c4e21939af2e83213b7d1c..62e27948a3faed9d7ae7f022fedf2b1cd2cd6eb5 100644 (file)
        chosen {
                stdout-path = "serial0:115200n8";
        };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power {
+                       label = "orangepi:red:power";
+                       gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+                       default-state = "on";
+               };
+
+               status {
+                       label = "orangepi:green:status";
+                       gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+               };
+       };
+
+       reg_vcc5v: vcc5v {
+               /* board wide 5V supply directly from the DC jack */
+               compatible = "regulator-fixed";
+               regulator-name = "vcc-5v";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               regulator-always-on;
+       };
+};
+
+&ehci0 {
+       status = "okay";
+};
+
+&ehci3 {
+       status = "okay";
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins>;
        vmmc-supply = <&reg_cldo1>;
        cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
        bus-width = <4>;
        status = "okay";
 };
 
+&ohci0 {
+       status = "okay";
+};
+
+&ohci3 {
+       status = "okay";
+};
+
 &r_i2c {
        status = "okay";
 
                interrupt-controller;
                #interrupt-cells = <1>;
                x-powers,self-working-mode;
+               vina-supply = <&reg_vcc5v>;
+               vinb-supply = <&reg_vcc5v>;
+               vinc-supply = <&reg_vcc5v>;
+               vind-supply = <&reg_vcc5v>;
+               vine-supply = <&reg_vcc5v>;
+               aldoin-supply = <&reg_vcc5v>;
+               bldoin-supply = <&reg_vcc5v>;
+               cldoin-supply = <&reg_vcc5v>;
 
                regulators {
                        reg_aldo1: aldo1 {
        pinctrl-0 = <&uart0_ph_pins>;
        status = "okay";
 };
+
+&usb2otg {
+       dr_mode = "otg";
+       status = "okay";
+};
+
+&usb2phy {
+       usb0_id_det-gpios = <&pio 2 6 GPIO_ACTIVE_HIGH>; /* PC6 */
+       usb0_vbus-supply = <&reg_vcc5v>;
+       usb3_vbus-supply = <&reg_vcc5v>;
+       status = "okay";
+};
index ceffc40810eec42e3655f80fcd39d66965617c73..4802902e128f980d58baf7bbdd93094230840b30 100644 (file)
@@ -14,6 +14,7 @@
        compatible = "pine64,pine-h64", "allwinner,sun50i-h6";
 
        aliases {
+               ethernet0 = &emac;
                serial0 = &uart0;
        };
 
                stdout-path = "serial0:115200n8";
        };
 
+       connector {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_in: endpoint {
+                               remote-endpoint = <&hdmi_out_con>;
+                       };
+               };
+       };
+
        leds {
                compatible = "gpio-leds";
 
                        gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
                };
        };
+
+       reg_usb_vbus: vbus {
+               compatible = "regulator-fixed";
+               regulator-name = "usb-vbus";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               startup-delay-us = <100000>;
+               gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
 };
 
-&mmc0 {
+&emac {
        pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins>;
+       pinctrl-0 = <&ext_rgmii_pins>;
+       phy-mode = "rgmii";
+       phy-handle = <&ext_rgmii_phy>;
+       phy-supply = <&reg_aldo2>;
+       allwinner,rx-delay-ps = <200>;
+       allwinner,tx-delay-ps = <200>;
+       status = "okay";
+};
+
+&mdio {
+       ext_rgmii_phy: ethernet-phy@1 {
+               compatible = "ethernet-phy-ieee802.3-c22";
+               reg = <1>;
+       };
+};
+
+&de {
+       status = "okay";
+};
+
+&hdmi {
+       status = "okay";
+};
+
+&hdmi_out {
+       hdmi_out_con: endpoint {
+               remote-endpoint = <&hdmi_con_in>;
+       };
+};
+
+&ehci0 {
+       status = "okay";
+};
+
+&ehci3 {
+       status = "okay";
+};
+
+&mmc0 {
        vmmc-supply = <&reg_cldo1>;
        cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+       bus-width = <4>;
        status = "okay";
 };
 
 &mmc2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc2_pins>;
        vmmc-supply = <&reg_cldo1>;
        vqmmc-supply = <&reg_bldo2>;
        non-removable;
        cap-mmc-hw-reset;
+       bus-width = <8>;
+       status = "okay";
+};
+
+&ohci0 {
+       status = "okay";
+};
+
+&ohci3 {
        status = "okay";
 };
 
                                regulator-min-microvolt = <3300000>;
                                regulator-max-microvolt = <3300000>;
                                regulator-name = "vcc-ac200";
+                               regulator-enable-ramp-delay = <100000>;
                        };
 
                        reg_aldo3: aldo3 {
        pinctrl-0 = <&uart0_ph_pins>;
        status = "okay";
 };
+
+&usb2otg {
+       dr_mode = "host";
+       status = "okay";
+};
+
+&usb2phy {
+       usb0_vbus-supply = <&reg_usb_vbus>;
+       usb3_vbus-supply = <&reg_usb_vbus>;
+       status = "okay";
+};
index cfa5fffcf62b437c60a9fde4b601767ecc7548b3..e0dc4a05c1ba0273e2c3fced95c063e38f4f0d17 100644 (file)
@@ -6,8 +6,11 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/sun50i-h6-ccu.h>
 #include <dt-bindings/clock/sun50i-h6-r-ccu.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/clock/sun8i-tcon-top.h>
 #include <dt-bindings/reset/sun50i-h6-ccu.h>
 #include <dt-bindings/reset/sun50i-h6-r-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
 
 / {
        interrupt-parent = <&gic>;
                #size-cells = <0>;
 
                cpu0: cpu@0 {
-                       compatible = "arm,cortex-a53", "arm,armv8";
+                       compatible = "arm,cortex-a53";
                        device_type = "cpu";
                        reg = <0>;
                        enable-method = "psci";
                };
 
                cpu1: cpu@1 {
-                       compatible = "arm,cortex-a53", "arm,armv8";
+                       compatible = "arm,cortex-a53";
                        device_type = "cpu";
                        reg = <1>;
                        enable-method = "psci";
                };
 
                cpu2: cpu@2 {
-                       compatible = "arm,cortex-a53", "arm,armv8";
+                       compatible = "arm,cortex-a53";
                        device_type = "cpu";
                        reg = <2>;
                        enable-method = "psci";
                };
 
                cpu3: cpu@3 {
-                       compatible = "arm,cortex-a53", "arm,armv8";
+                       compatible = "arm,cortex-a53";
                        device_type = "cpu";
                        reg = <3>;
                        enable-method = "psci";
                };
        };
 
+       de: display-engine {
+               compatible = "allwinner,sun50i-h6-display-engine";
+               allwinner,pipelines = <&mixer0>;
+               status = "disabled";
+       };
+
        iosc: internal-osc-clk {
                #clock-cells = <0>;
                compatible = "fixed-clock";
                #size-cells = <1>;
                ranges;
 
+               display-engine@1000000 {
+                       compatible = "allwinner,sun50i-h6-de3",
+                                    "allwinner,sun50i-a64-de2";
+                       reg = <0x1000000 0x400000>;
+                       allwinner,sram = <&de2_sram 1>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <0 0x1000000 0x400000>;
+
+                       display_clocks: clock@0 {
+                               compatible = "allwinner,sun50i-h6-de3-clk";
+                               reg = <0x0 0x10000>;
+                               clocks = <&ccu CLK_DE>,
+                                        <&ccu CLK_BUS_DE>;
+                               clock-names = "mod",
+                                             "bus";
+                               resets = <&ccu RST_BUS_DE>;
+                               #clock-cells = <1>;
+                               #reset-cells = <1>;
+                       };
+
+                       mixer0: mixer@100000 {
+                               compatible = "allwinner,sun50i-h6-de3-mixer-0";
+                               reg = <0x100000 0x100000>;
+                               clocks = <&display_clocks CLK_BUS_MIXER0>,
+                                        <&display_clocks CLK_MIXER0>;
+                               clock-names = "bus",
+                                             "mod";
+                               resets = <&display_clocks RST_MIXER0>;
+
+                               ports {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+
+                                       mixer0_out: port@1 {
+                                               reg = <1>;
+
+                                               mixer0_out_tcon_top_mixer0: endpoint {
+                                                       remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
+                                               };
+                                       };
+                               };
+                       };
+               };
+
+               video-codec@1c0e000 {
+                       compatible = "allwinner,sun50i-h6-video-engine";
+                       reg = <0x01c0e000 0x2000>;
+                       clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+                                <&ccu CLK_MBUS_VE>;
+                       clock-names = "ahb", "mod", "ram";
+                       resets = <&ccu RST_BUS_VE>;
+                       interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+                       allwinner,sram = <&ve_sram 1>;
+               };
+
+               syscon: syscon@3000000 {
+                       compatible = "allwinner,sun50i-h6-system-control",
+                                    "allwinner,sun50i-a64-system-control";
+                       reg = <0x03000000 0x1000>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges;
+
+                       sram_c: sram@28000 {
+                               compatible = "mmio-sram";
+                               reg = <0x00028000 0x1e000>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               ranges = <0 0x00028000 0x1e000>;
+
+                               de2_sram: sram-section@0 {
+                                       compatible = "allwinner,sun50i-h6-sram-c",
+                                                    "allwinner,sun50i-a64-sram-c";
+                                       reg = <0x0000 0x1e000>;
+                               };
+                       };
+
+                       sram_c1: sram@1a00000 {
+                               compatible = "mmio-sram";
+                               reg = <0x01a00000 0x200000>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               ranges = <0 0x01a00000 0x200000>;
+
+                               ve_sram: sram-section@0 {
+                                       compatible = "allwinner,sun50i-h6-sram-c1",
+                                                    "allwinner,sun4i-a10-sram-c1";
+                                       reg = <0x000000 0x200000>;
+                               };
+                       };
+               };
+
                ccu: clock@3001000 {
                        compatible = "allwinner,sun50i-h6-ccu";
                        reg = <0x03001000 0x1000>;
                        #reset-cells = <1>;
                };
 
-               gic: interrupt-controller@3021000 {
-                       compatible = "arm,gic-400";
-                       reg = <0x03021000 0x1000>,
-                             <0x03022000 0x2000>,
-                             <0x03024000 0x2000>,
-                             <0x03026000 0x2000>;
-                       interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-                       interrupt-controller;
-                       #interrupt-cells = <3>;
+               sid: sid@3006000 {
+                       compatible = "allwinner,sun50i-h6-sid";
+                       reg = <0x03006000 0x400>;
                };
 
                pio: pinctrl@300b000 {
                        interrupt-controller;
                        #interrupt-cells = <3>;
 
+                       ext_rgmii_pins: rgmii-pins {
+                               pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+                                      "PD5", "PD7", "PD8", "PD9", "PD10",
+                                      "PD11", "PD12", "PD13", "PD19", "PD20";
+                               function = "emac";
+                               drive-strength = <40>;
+                       };
+
+                       hdmi_pins: hdmi-pins {
+                               pins = "PH8", "PH9", "PH10";
+                               function = "hdmi";
+                       };
+
                        mmc0_pins: mmc0-pins {
                                pins = "PF0", "PF1", "PF2", "PF3",
                                       "PF4", "PF5";
                                bias-pull-up;
                        };
 
-                       uart0_ph_pins: uart0-ph {
+                       uart0_ph_pins: uart0-ph-pins {
                                pins = "PH0", "PH1";
                                function = "uart0";
                        };
                };
 
+               gic: interrupt-controller@3021000 {
+                       compatible = "arm,gic-400";
+                       reg = <0x03021000 0x1000>,
+                             <0x03022000 0x2000>,
+                             <0x03024000 0x2000>,
+                             <0x03026000 0x2000>;
+                       interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
+               };
+
                mmc0: mmc@4020000 {
                        compatible = "allwinner,sun50i-h6-mmc",
                                     "allwinner,sun50i-a64-mmc";
                        resets = <&ccu RST_BUS_MMC0>;
                        reset-names = "ahb";
                        interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mmc0_pins>;
                        status = "disabled";
                        #address-cells = <1>;
                        #size-cells = <0>;
                        resets = <&ccu RST_BUS_MMC2>;
                        reset-names = "ahb";
                        interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mmc2_pins>;
                        status = "disabled";
                        #address-cells = <1>;
                        #size-cells = <0>;
                        status = "disabled";
                };
 
+               emac: ethernet@5020000 {
+                       compatible = "allwinner,sun50i-h6-emac",
+                                    "allwinner,sun50i-a64-emac";
+                       syscon = <&syscon>;
+                       reg = <0x05020000 0x10000>;
+                       interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "macirq";
+                       resets = <&ccu RST_BUS_EMAC>;
+                       reset-names = "stmmaceth";
+                       clocks = <&ccu CLK_BUS_EMAC>;
+                       clock-names = "stmmaceth";
+                       status = "disabled";
+
+                       mdio: mdio {
+                               compatible = "snps,dwmac-mdio";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                       };
+               };
+
+               usb2otg: usb@5100000 {
+                       compatible = "allwinner,sun50i-h6-musb",
+                                    "allwinner,sun8i-a33-musb";
+                       reg = <0x05100000 0x0400>;
+                       clocks = <&ccu CLK_BUS_OTG>;
+                       resets = <&ccu RST_BUS_OTG>;
+                       interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "mc";
+                       phys = <&usb2phy 0>;
+                       phy-names = "usb";
+                       extcon = <&usb2phy 0>;
+                       status = "disabled";
+               };
+
+               usb2phy: phy@5100400 {
+                       compatible = "allwinner,sun50i-h6-usb-phy";
+                       reg = <0x05100400 0x24>,
+                             <0x05101800 0x4>,
+                             <0x05311800 0x4>;
+                       reg-names = "phy_ctrl",
+                                   "pmu0",
+                                   "pmu3";
+                       clocks = <&ccu CLK_USB_PHY0>,
+                                <&ccu CLK_USB_PHY3>;
+                       clock-names = "usb0_phy",
+                                     "usb3_phy";
+                       resets = <&ccu RST_USB_PHY0>,
+                                <&ccu RST_USB_PHY3>;
+                       reset-names = "usb0_reset",
+                                     "usb3_reset";
+                       status = "disabled";
+                       #phy-cells = <1>;
+               };
+
+               ehci0: usb@5101000 {
+                       compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
+                       reg = <0x05101000 0x100>;
+                       interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_OHCI0>,
+                                <&ccu CLK_BUS_EHCI0>,
+                                <&ccu CLK_USB_OHCI0>;
+                       resets = <&ccu RST_BUS_OHCI0>,
+                                <&ccu RST_BUS_EHCI0>;
+                       status = "disabled";
+               };
+
+               ohci0: usb@5101400 {
+                       compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
+                       reg = <0x05101400 0x100>;
+                       interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_OHCI0>,
+                                <&ccu CLK_USB_OHCI0>;
+                       resets = <&ccu RST_BUS_OHCI0>;
+                       status = "disabled";
+               };
+
+               ehci3: usb@5311000 {
+                       compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
+                       reg = <0x05311000 0x100>;
+                       interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_OHCI3>,
+                                <&ccu CLK_BUS_EHCI3>,
+                                <&ccu CLK_USB_OHCI3>;
+                       resets = <&ccu RST_BUS_OHCI3>,
+                                <&ccu RST_BUS_EHCI3>;
+                       phys = <&usb2phy 3>;
+                       phy-names = "usb";
+                       status = "disabled";
+               };
+
+               ohci3: usb@5311400 {
+                       compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
+                       reg = <0x05311400 0x100>;
+                       interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_OHCI3>,
+                                <&ccu CLK_USB_OHCI3>;
+                       resets = <&ccu RST_BUS_OHCI3>;
+                       phys = <&usb2phy 3>;
+                       phy-names = "usb";
+                       status = "disabled";
+               };
+
+               hdmi: hdmi@6000000 {
+                       compatible = "allwinner,sun50i-h6-dw-hdmi";
+                       reg = <0x06000000 0x10000>;
+                       reg-io-width = <1>;
+                       interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
+                                <&ccu CLK_HDMI>, <&ccu CLK_HDMI_CEC>,
+                                <&ccu CLK_HDCP>, <&ccu CLK_BUS_HDCP>;
+                       clock-names = "iahb", "isfr", "tmds", "cec", "hdcp",
+                                     "hdcp-bus";
+                       resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>;
+                       reset-names = "ctrl", "hdcp";
+                       phys = <&hdmi_phy>;
+                       phy-names = "hdmi-phy";
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&hdmi_pins>;
+                       status = "disabled";
+
+                       ports {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               hdmi_in: port@0 {
+                                       reg = <0>;
+
+                                       hdmi_in_tcon_top: endpoint {
+                                               remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
+                                       };
+                               };
+
+                               hdmi_out: port@1 {
+                                       reg = <1>;
+                               };
+                       };
+               };
+
+               hdmi_phy: hdmi-phy@6010000 {
+                       compatible = "allwinner,sun50i-h6-hdmi-phy";
+                       reg = <0x06010000 0x10000>;
+                       clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>;
+                       clock-names = "bus", "mod";
+                       resets = <&ccu RST_BUS_HDMI>;
+                       reset-names = "phy";
+                       #phy-cells = <0>;
+               };
+
+               tcon_top: tcon-top@6510000 {
+                       compatible = "allwinner,sun50i-h6-tcon-top";
+                       reg = <0x06510000 0x1000>;
+                       clocks = <&ccu CLK_BUS_TCON_TOP>,
+                                <&ccu CLK_TCON_TV0>;
+                       clock-names = "bus",
+                                     "tcon-tv0";
+                       clock-output-names = "tcon-top-tv0";
+                       resets = <&ccu RST_BUS_TCON_TOP>;
+                       reset-names = "rst";
+                       #clock-cells = <1>;
+
+                       ports {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               tcon_top_mixer0_in: port@0 {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+                                       reg = <0>;
+
+                                       tcon_top_mixer0_in_mixer0: endpoint@0 {
+                                               reg = <0>;
+                                               remote-endpoint = <&mixer0_out_tcon_top_mixer0>;
+                                       };
+                               };
+
+                               tcon_top_mixer0_out: port@1 {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+                                       reg = <1>;
+
+                                       tcon_top_mixer0_out_tcon_tv: endpoint@2 {
+                                               reg = <2>;
+                                               remote-endpoint = <&tcon_tv_in_tcon_top_mixer0>;
+                                       };
+                               };
+
+                               tcon_top_hdmi_in: port@4 {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+                                       reg = <4>;
+
+                                       tcon_top_hdmi_in_tcon_tv: endpoint@0 {
+                                               reg = <0>;
+                                               remote-endpoint = <&tcon_tv_out_tcon_top>;
+                                       };
+                               };
+
+                               tcon_top_hdmi_out: port@5 {
+                                       reg = <5>;
+
+                                       tcon_top_hdmi_out_hdmi: endpoint {
+                                               remote-endpoint = <&hdmi_in_tcon_top>;
+                                       };
+                               };
+                       };
+               };
+
+               tcon_tv: lcd-controller@6515000 {
+                       compatible = "allwinner,sun50i-h6-tcon-tv",
+                                    "allwinner,sun8i-r40-tcon-tv";
+                       reg = <0x06515000 0x1000>;
+                       interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_TCON_TV0>,
+                                <&tcon_top CLK_TCON_TOP_TV0>;
+                       clock-names = "ahb",
+                                     "tcon-ch1";
+                       resets = <&ccu RST_BUS_TCON_TV0>;
+                       reset-names = "lcd";
+
+                       ports {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               tcon_tv_in: port@0 {
+                                       reg = <0>;
+
+                                       tcon_tv_in_tcon_top_mixer0: endpoint {
+                                               remote-endpoint = <&tcon_top_mixer0_out_tcon_tv>;
+                                       };
+                               };
+
+                               tcon_tv_out: port@1 {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+                                       reg = <1>;
+
+                                       tcon_tv_out_tcon_top: endpoint@1 {
+                                               reg = <1>;
+                                               remote-endpoint = <&tcon_top_hdmi_in_tcon_tv>;
+                                       };
+                               };
+                       };
+               };
+
                r_ccu: clock@7010000 {
                        compatible = "allwinner,sun50i-h6-r-ccu";
                        reg = <0x07010000 0x400>;
                        interrupt-controller;
                        #interrupt-cells = <3>;
 
-                       r_i2c_pins: r-i2c {
+                       r_i2c_pins: r-i2c-pins {
                                pins = "PL0", "PL1";
                                function = "s_i2c";
                        };
diff --git a/include/dt-bindings/clock/sun8i-tcon-top.h b/include/dt-bindings/clock/sun8i-tcon-top.h
new file mode 100644 (file)
index 0000000..25164d7
--- /dev/null
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/* Copyright (C) 2018 Jernej Skrabec <jernej.skrabec@siol.net> */
+
+#ifndef _DT_BINDINGS_CLOCK_SUN8I_TCON_TOP_H_
+#define _DT_BINDINGS_CLOCK_SUN8I_TCON_TOP_H_
+
+#define CLK_TCON_TOP_TV0       0
+#define CLK_TCON_TOP_TV1       1
+#define CLK_TCON_TOP_DSI       2
+
+#endif /* _DT_BINDINGS_CLOCK_SUN8I_TCON_TOP_H_ */