phy: sun50i-usb3: Add a driver for the H6 USB3 PHY

This driver is needed for XHCI to work on the Allwinner H6 SoC. The
driver is copied from Linux v5.10.

Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

diff --git a/drivers/phy/allwinner/Kconfig b/drivers/phy/allwinner/Kconfig
index dba3bae61c450f6383d882ba20424e530a7f3a5e..6bfb79cbcad36395cd4d0eda6cde3fe5adcd14bf 100644 (file)
--- a/drivers/phy/allwinner/Kconfig
+++ b/drivers/phy/allwinner/Kconfig
@@ -11,3 +11,11 @@ config PHY_SUN4I_USB
 
          This driver controls the entire USB PHY block, both the USB OTG
          parts, as well as the 2 regular USB 2 host PHYs.
+
+config PHY_SUN50I_USB3
+       bool "Allwinner sun50i USB3 PHY driver"
+       depends on ARCH_SUNXI
+       select PHY
+       help
+         Enable this to support the USB3 transceiver that is part of
+         Allwinner sun50i SoCs.

diff --git a/drivers/phy/allwinner/Makefile b/drivers/phy/allwinner/Makefile
index e709fca643cb247cd2c4ff39f488a25c1adfef60..f2b60ce1a644f92dde8f092c018177b1a0f4f7f7 100644 (file)
--- a/drivers/phy/allwinner/Makefile
+++ b/drivers/phy/allwinner/Makefile
@@ -4,3 +4,4 @@
 #
 
 obj-$(CONFIG_PHY_SUN4I_USB)            += phy-sun4i-usb.o
+obj-$(CONFIG_PHY_SUN50I_USB3)          += phy-sun50i-usb3.o

diff --git a/drivers/phy/allwinner/phy-sun50i-usb3.c b/drivers/phy/allwinner/phy-sun50i-usb3.c
new file mode 100644 (file)
index 0000000..e5a3d2d
--- /dev/null
+++ b/drivers/phy/allwinner/phy-sun50i-usb3.c
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Allwinner sun50i(H6) USB 3.0 phy driver
+ *
+ * Copyright (C) 2020 Samuel Holland <samuel@sholland.org>
+ *
+ * Based on the Linux driver, which is:
+ *
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * Based on phy-sun9i-usb.c, which is:
+ *
+ * Copyright (C) 2014-2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * Based on code from Allwinner BSP, which is:
+ *
+ * Copyright (c) 2010-2015 Allwinner Technology Co., Ltd.
+ */
+
+#include <asm/io.h>
+#include <clk.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <generic-phy.h>
+#include <linux/bitops.h>
+#include <reset.h>
+
+/* Interface Status and Control Registers */
+#define SUNXI_ISCR                     0x00
+#define SUNXI_PIPE_CLOCK_CONTROL       0x14
+#define SUNXI_PHY_TUNE_LOW             0x18
+#define SUNXI_PHY_TUNE_HIGH            0x1c
+#define SUNXI_PHY_EXTERNAL_CONTROL     0x20
+
+/* USB2.0 Interface Status and Control Register */
+#define SUNXI_ISCR_FORCE_VBUS          (3 << 12)
+
+/* PIPE Clock Control Register */
+#define SUNXI_PCC_PIPE_CLK_OPEN                (1 << 6)
+
+/* PHY External Control Register */
+#define SUNXI_PEC_EXTERN_VBUS          (3 << 1)
+#define SUNXI_PEC_SSC_EN               (1 << 24)
+#define SUNXI_PEC_REF_SSP_EN           (1 << 26)
+
+/* PHY Tune High Register */
+#define SUNXI_TX_DEEMPH_3P5DB(n)       ((n) << 19)
+#define SUNXI_TX_DEEMPH_3P5DB_MASK     GENMASK(24, 19)
+#define SUNXI_TX_DEEMPH_6DB(n)         ((n) << 13)
+#define SUNXI_TX_DEEMPH_6GB_MASK       GENMASK(18, 13)
+#define SUNXI_TX_SWING_FULL(n)         ((n) << 6)
+#define SUNXI_TX_SWING_FULL_MASK       GENMASK(12, 6)
+#define SUNXI_LOS_BIAS(n)              ((n) << 3)
+#define SUNXI_LOS_BIAS_MASK            GENMASK(5, 3)
+#define SUNXI_TXVBOOSTLVL(n)           ((n) << 0)
+#define SUNXI_TXVBOOSTLVL_MASK         GENMASK(2, 0)
+
+struct sun50i_usb3_phy_priv {
+       void __iomem *regs;
+       struct reset_ctl reset;
+       struct clk clk;
+};
+
+static void sun50i_usb3_phy_open(struct sun50i_usb3_phy_priv *phy)
+{
+       u32 val;
+
+       val = readl(phy->regs + SUNXI_PHY_EXTERNAL_CONTROL);
+       val |= SUNXI_PEC_EXTERN_VBUS;
+       val |= SUNXI_PEC_SSC_EN | SUNXI_PEC_REF_SSP_EN;
+       writel(val, phy->regs + SUNXI_PHY_EXTERNAL_CONTROL);
+
+       val = readl(phy->regs + SUNXI_PIPE_CLOCK_CONTROL);
+       val |= SUNXI_PCC_PIPE_CLK_OPEN;
+       writel(val, phy->regs + SUNXI_PIPE_CLOCK_CONTROL);
+
+       val = readl(phy->regs + SUNXI_ISCR);
+       val |= SUNXI_ISCR_FORCE_VBUS;
+       writel(val, phy->regs + SUNXI_ISCR);
+
+       /*
+        * All the magic numbers written to the PHY_TUNE_{LOW_HIGH}
+        * registers are directly taken from the BSP USB3 driver from
+        * Allwiner.
+        */
+       writel(0x0047fc87, phy->regs + SUNXI_PHY_TUNE_LOW);
+
+       val = readl(phy->regs + SUNXI_PHY_TUNE_HIGH);
+       val &= ~(SUNXI_TXVBOOSTLVL_MASK | SUNXI_LOS_BIAS_MASK |
+                SUNXI_TX_SWING_FULL_MASK | SUNXI_TX_DEEMPH_6GB_MASK |
+                SUNXI_TX_DEEMPH_3P5DB_MASK);
+       val |= SUNXI_TXVBOOSTLVL(0x7);
+       val |= SUNXI_LOS_BIAS(0x7);
+       val |= SUNXI_TX_SWING_FULL(0x55);
+       val |= SUNXI_TX_DEEMPH_6DB(0x20);
+       val |= SUNXI_TX_DEEMPH_3P5DB(0x15);
+       writel(val, phy->regs + SUNXI_PHY_TUNE_HIGH);
+}
+
+static int sun50i_usb3_phy_init(struct phy *phy)
+{
+       struct sun50i_usb3_phy_priv *priv = dev_get_priv(phy->dev);
+       int ret;
+
+       ret = clk_prepare_enable(&priv->clk);
+       if (ret)
+               return ret;
+
+       ret = reset_deassert(&priv->reset);
+       if (ret) {
+               clk_disable_unprepare(&priv->clk);
+               return ret;
+       }
+
+       sun50i_usb3_phy_open(priv);
+
+       return 0;
+}
+
+static int sun50i_usb3_phy_exit(struct phy *phy)
+{
+       struct sun50i_usb3_phy_priv *priv = dev_get_priv(phy->dev);
+
+       reset_assert(&priv->reset);
+       clk_disable_unprepare(&priv->clk);
+
+       return 0;
+}
+
+static const struct phy_ops sun50i_usb3_phy_ops = {
+       .init           = sun50i_usb3_phy_init,
+       .exit           = sun50i_usb3_phy_exit,
+};
+
+static int sun50i_usb3_phy_probe(struct udevice *dev)
+{
+       struct sun50i_usb3_phy_priv *priv = dev_get_priv(dev);
+       int ret;
+
+       ret = clk_get_by_index(dev, 0, &priv->clk);
+       if (ret) {
+               dev_err(dev, "failed to get phy clock\n");
+               return ret;
+       }
+
+       ret = reset_get_by_index(dev, 0, &priv->reset);
+       if (ret) {
+               dev_err(dev, "failed to get reset control\n");
+               return ret;
+       }
+
+       priv->regs = (void __iomem *)dev_read_addr(dev);
+       if (IS_ERR(priv->regs))
+               return PTR_ERR(priv->regs);
+
+       return 0;
+}
+
+static const struct udevice_id sun50i_usb3_phy_ids[] = {
+       { .compatible = "allwinner,sun50i-h6-usb3-phy" },
+       { },
+};
+
+U_BOOT_DRIVER(sun50i_usb3_phy) = {
+       .name           = "sun50i-usb3-phy",
+       .id             = UCLASS_PHY,
+       .of_match       = sun50i_usb3_phy_ids,
+       .ops            = &sun50i_usb3_phy_ops,
+       .probe          = sun50i_usb3_phy_probe,
+       .priv_auto      = sizeof(struct sun50i_usb3_phy_priv),
+};