At present there is only one Kconfig option CONFIG_SIFIVE_CLINT to
control the enabling of SiFive CLINT support in both SPL (M-mode)
and U-Boot proper (S-mode). So for a typical SPL config that the
SiFive CLINT driver is enabled in both SPL and U-Boot proper, that
means the S-mode U-Boot tries to access the memory-mapped CLINT
registers directly, instead of the normal 'rdtime' instruction.
This was not a problem before, as the hardware does not forbid the
access from S-mode. However this becomes an issue now with OpenSBI
commit
8b569803475e ("lib: utils/sys: Add CLINT memregion in the root domain")
that the SiFive CLINT register space is protected by PMP for M-mode
access only. U-Boot proper does not boot any more with the latest
OpenSBI, that access exceptions are fired forever from U-Boot when
trying to read the timer value via the SiFive CLINT driver in U-Boot.
To solve this, we need to split current SiFive CLINT support between
SPL and U-Boot proper, using 2 separate Kconfig options.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
config SIFIVE_CLINT
bool
- depends on RISCV_MMODE || SPL_RISCV_MMODE
+ depends on RISCV_MMODE
+ help
+ The SiFive CLINT block holds memory-mapped control and status registers
+ associated with software and timer interrupts.
+
+config SPL_SIFIVE_CLINT
+ bool
+ depends on SPL_RISCV_MMODE
help
The SiFive CLINT block holds memory-mapped control and status registers
associated with software and timer interrupts.
imply CPU
imply CPU_RISCV
imply RISCV_TIMER if (RISCV_SMODE || SPL_RISCV_SMODE)
- imply SIFIVE_CLINT if (RISCV_MMODE || SPL_RISCV_MMODE)
+ imply SPL_SIFIVE_CLINT
imply CMD_CPU
imply SPL_CPU
imply SPL_OPENSBI
imply CPU
imply CPU_RISCV
imply RISCV_TIMER if (RISCV_SMODE || SPL_RISCV_SMODE)
- imply SIFIVE_CLINT if (RISCV_MMODE || SPL_RISCV_MMODE)
+ imply SIFIVE_CLINT if RISCV_MMODE
+ imply SPL_SIFIVE_CLINT if SPL_RISCV_MMODE
imply CMD_CPU
imply SPL_CPU
imply SPL_OPENSBI
struct arch_global_data {
long boot_hart; /* boot hart id */
phys_addr_t firmware_fdt_addr;
-#ifdef CONFIG_SIFIVE_CLINT
+#if CONFIG_IS_ENABLED(SIFIVE_CLINT)
void __iomem *clint; /* clint base address */
#endif
#ifdef CONFIG_ANDES_PLIC
obj-$(CONFIG_CMD_GO) += boot.o
obj-y += cache.o
ifeq ($(CONFIG_$(SPL_)RISCV_MMODE),y)
-obj-$(CONFIG_SIFIVE_CLINT) += sifive_clint.o
+obj-$(CONFIG_$(SPL_)SIFIVE_CLINT) += sifive_clint.o
obj-$(CONFIG_ANDES_PLIC) += andes_plic.o
else
obj-$(CONFIG_SBI) += sbi.o
obj-$(CONFIG_RISCV_TIMER) += riscv_timer.o
obj-$(CONFIG_ROCKCHIP_TIMER) += rockchip_timer.o
obj-$(CONFIG_SANDBOX_TIMER) += sandbox_timer.o
-obj-$(CONFIG_SIFIVE_CLINT) += sifive_clint_timer.o
+obj-$(CONFIG_$(SPL_)SIFIVE_CLINT) += sifive_clint_timer.o
obj-$(CONFIG_STI_TIMER) += sti-timer.o
obj-$(CONFIG_STM32_TIMER) += stm32_timer.o
obj-$(CONFIG_X86_TSC_TIMER) += tsc_timer.o