]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
net: Add EMAC driver for H3/A83T/A64 SoCs.
authorAmit Singh Tomar <amittomer25@gmail.com>
Wed, 6 Jul 2016 12:29:44 +0000 (17:59 +0530)
committerHans de Goede <hdegoede@redhat.com>
Fri, 15 Jul 2016 06:34:34 +0000 (08:34 +0200)
This patch add EMAC driver support for H3/A83T/A64 SoCs.
Tested on Pine64(A64-External PHY) and Orangepipc(H3-Internal PHY).

BIG Thanks to Andre for providing some of the DT code.

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
12 files changed:
arch/arm/dts/sun50i-a64-pine64-plus.dts
arch/arm/dts/sun50i-a64.dtsi
arch/arm/dts/sun8i-h3-orangepi-2.dts
arch/arm/dts/sun8i-h3-orangepi-pc.dts
arch/arm/dts/sun8i-h3.dtsi
arch/arm/include/asm/arch-sunxi/clock_sun6i.h
arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
configs/orangepi_pc_defconfig
configs/pine64_plus_defconfig
drivers/net/Kconfig
drivers/net/Makefile
drivers/net/sun8i_emac.c [new file with mode: 0644]

index 549dc15bd5d0000e2260136498dab6ca9045b3fd..389c6096ca149734af69b9d9549b72073841d475 100644 (file)
                reg = <0x40000000 0x40000000>;
        };
 };
+
+&emac {
+       pinctrl-names = "default";
+       pinctrl-0 = <&rgmii_pins>;
+       phy-mode = "rgmii";
+       phy = <&phy1>;
+       status = "okay";
+
+       phy1: ethernet-phy@1 {
+       reg = <1>;
+       };
+};
+
index 1bd436f8470b08b19401e75f23a507055f1eecf8..7d0dc76a11f7170f45248bfa8b543ea63b9a24bf 100644 (file)
                                allwinner,drive = <SUN4I_PINCTRL_10_MA>;
                                allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
                        };
+
+                       rmii_pins: rmii_pins {
+                               allwinner,pins = "PD10", "PD11", "PD13", "PD14",
+                                                "PD17", "PD18", "PD19", "PD20",
+                                                "PD22", "PD23";
+                               allwinner,function = "emac";
+                               allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+
+                       rgmii_pins: rgmii_pins {
+                               allwinner,pins = "PD8", "PD9", "PD10", "PD11",
+                                                "PD12", "PD13", "PD15",
+                                                "PD16", "PD17", "PD18", "PD19",
+                                                "PD20", "PD21", "PD22", "PD23";
+                               allwinner,function = "emac";
+                               allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
                };
 
                ahb_rst: reset@1c202c0 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                };
+
+               emac: ethernet@01c30000 {
+                       compatible = "allwinner,sun50i-a64-emac";
+                       reg = <0x01c30000 0x2000>, <0x01c00030 0x4>;
+                       reg-names = "emac", "syscon";
+                       interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+                       resets = <&ahb_rst 17>;
+                       reset-names = "ahb";
+                       clocks = <&bus_gates 17>;
+                       clock-names = "ahb";
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
        };
 };
index f93f5d1695c4b38a05fbc8fdb818e2301e7366e4..d3f8f550a227a6b74982d517cc68b5b9c3a3cf50 100644 (file)
        usb1_vbus-supply = <&reg_usb1_vbus>;
        status = "okay";
 };
+
+&emac {
+       pinctrl-names = "default";
+       pinctrl-0 = <&rgmii_pins>;
+       phy-mode = "rgmii";
+       phy = <&phy1>;
+       status = "okay";
+
+       phy1: ethernet-phy@1 {
+               reg = <1>;
+       };
+};
+
index 30ccca019dd23747256b2c90b305b7d667a27287..0a74a9193bbfc06d54efb7a301340c14d5390378 100644 (file)
        /* USB VBUS is always on */
        status = "okay";
 };
+
+&emac {
+       phy = <&phy1>;
+       phy-mode = "mii";
+       allwinner,use-internal-phy;
+       allwinner,leds-active-low;
+       status = "okay";
+
+       phy1: ethernet-phy@1 {
+               reg = <1>;
+       };
+};
index c2f63c50501cd0196b8ef14ae8a4e133f8ca877d..6ca5e34c9bfc56f1e44ef59c911bfcfe1feaae72 100644 (file)
                        interrupt-controller;
                        #interrupt-cells = <3>;
 
+                       rgmii_pins: rgmii_pins {
+                               allwinner,pins = "PD0", "PD1", "PD2", "PD3",
+                                                "PD4", "PD5", "PD7",
+                                                "PD8", "PD9", "PD10",
+                                                "PD12", "PD13", "PD15",
+                                                "PD16", "PD17";
+                               allwinner,function = "emac";
+                               allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+
                        uart0_pins_a: uart0@0 {
                                allwinner,pins = "PA4", "PA5";
                                allwinner,function = "uart0";
                        status = "disabled";
                };
 
+               emac: ethernet@01c30000 {
+                       compatible = "allwinner,sun8i-h3-emac";
+                       reg = <0x01c30000 0x2000>, <0x01c00030 0x4>;
+                       reg-names = "emac", "syscon";
+                       interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+                       resets = <&ahb_rst 17>, <&ahb_rst 66>;
+                       reset-names = "ahb", "ephy";
+                       clocks = <&bus_gates 17>, <&bus_gates 128>;
+                       clock-names = "ahb", "ephy";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+
                gic: interrupt-controller@01c81000 {
                        compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
                        reg = <0x01c81000 0x1000>,
index c2e72f5a86b2595609d856d75a2ce18a1a87021a..d4dff1e3463e5a532aa79645ecd08dc8d2651209 100644 (file)
@@ -40,7 +40,8 @@ struct sunxi_ccm_reg {
        u32 ahb_gate1;          /* 0x64 ahb module clock gating 1 */
        u32 apb1_gate;          /* 0x68 apb1 module clock gating */
        u32 apb2_gate;          /* 0x6c apb2 module clock gating */
-       u32 reserved9[4];
+       u32 bus_gate4;          /* 0x70 gate 4 module clock gating */
+       u8 res3[0xc];
        u32 nand0_clk_cfg;      /* 0x80 nand0 clock control */
        u32 nand1_clk_cfg;      /* 0x84 nand1 clock control */
        u32 sd0_clk_cfg;        /* 0x88 sd0 clock control */
@@ -387,6 +388,7 @@ struct sunxi_ccm_reg {
 #define AHB_RESET_OFFSET_LCD0          4
 
 /* ahb_reset2 offsets */
+#define AHB_RESET_OFFSET_EPHY          2
 #define AHB_RESET_OFFSET_LVDS          0
 
 /* apb2 reset */
index c5e9d88bab5c974ce040a5555fd676dbd0860f48..cd009d7ccc2332075943956bf1387c42be5bb704 100644 (file)
@@ -87,7 +87,8 @@
 #define SUNXI_KEYPAD_BASE              0x01c23000
 #define SUNXI_TZPC_BASE                        0x01c23400
 
-#if defined(CONFIG_MACH_SUN8I_A83T) || defined(CONFIG_MACH_SUN8I_H3)
+#if defined(CONFIG_MACH_SUN8I_A83T) || defined(CONFIG_MACH_SUN8I_H3) || \
+defined(CONFIG_MACH_SUN50I)
 /* SID address space starts at 0x01c1400, but e-fuse is at offset 0x200 */
 #define SUNXI_SID_BASE                 0x01c14200
 #else
index 7eaa795b32e44d93f340b7ae07c6aa6c78dff2cd..294f7ab025d43b6adc7d8ed53dbc74d4bea1b563 100644 (file)
@@ -13,3 +13,4 @@ CONFIG_SPL=y
 # CONFIG_CMD_FPGA is not set
 CONFIG_SY8106A_POWER=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_SUN8I_EMAC=y
index 0bf79bfd3346f7e5e978ff7057923af39cfe511a..5c97de1dccb89fd8766d395558218fb6324afe67 100644 (file)
@@ -10,3 +10,4 @@ CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pine64-plus"
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
 CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y
+CONFIG_SUN8I_EMAC=y
index c1cb689ccf337338d0e5d76e473313102c56bddf..88d8e83906a10b314db1d4730b4e9be8e3dcf896 100644 (file)
@@ -152,6 +152,15 @@ config RTL8169
          This driver supports Realtek 8169 series gigabit ethernet family of
          PCI/PCIe chipsets/adapters.
 
+config SUN8I_EMAC
+        bool "Allwinner Sun8i Ethernet MAC support"
+        depends on DM_ETH
+        select PHYLIB
+        help
+          This driver supports the  Allwinner based SUN8I/SUN50I Ethernet MAC.
+         It can be found in H3/A64/A83T based SoCs and compatible with both
+         External and Internal PHY's.
+
 config XILINX_AXIEMAC
        depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
        select PHYLIB
index 57025921698028fe6e9d8af831e4a0875df0098c..a4485266d45732a66279fbc32bcdee23632e2552 100644 (file)
@@ -24,6 +24,7 @@ obj-$(CONFIG_E1000) += e1000.o
 obj-$(CONFIG_E1000_SPI) += e1000_spi.o
 obj-$(CONFIG_EEPRO100) += eepro100.o
 obj-$(CONFIG_SUNXI_EMAC) += sunxi_emac.o
+obj-$(CONFIG_SUN8I_EMAC) += sun8i_emac.o
 obj-$(CONFIG_ENC28J60) += enc28j60.o
 obj-$(CONFIG_EP93XX) += ep93xx_eth.o
 obj-$(CONFIG_ETHOC) += ethoc.o
diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c
new file mode 100644 (file)
index 0000000..4bed50d
--- /dev/null
@@ -0,0 +1,789 @@
+/*
+ * (C) Copyright 2016
+ * Author: Amit Singh Tomar, amittomer25@gmail.com
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ *
+ * Ethernet driver for H3/A64/A83T based SoC's
+ *
+ * It is derived from the work done by
+ * LABBE Corentin & Chen-Yu Tsai for Linux, THANKS!
+ *
+*/
+
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <common.h>
+#include <dm.h>
+#include <fdt_support.h>
+#include <linux/err.h>
+#include <malloc.h>
+#include <miiphy.h>
+#include <net.h>
+
+#define SCTL_EMAC_TX_CLK_SRC_MII       BIT(0)
+#define SCTL_EMAC_EPIT_MII             BIT(2)
+#define SCTL_EMAC_CLK_SEL              BIT(18) /* 25 Mhz */
+
+#define MDIO_CMD_MII_BUSY              BIT(0)
+#define MDIO_CMD_MII_WRITE             BIT(1)
+
+#define MDIO_CMD_MII_PHY_REG_ADDR_MASK 0x000001f0
+#define MDIO_CMD_MII_PHY_REG_ADDR_SHIFT        4
+#define MDIO_CMD_MII_PHY_ADDR_MASK     0x0001f000
+#define MDIO_CMD_MII_PHY_ADDR_SHIFT    12
+
+#define CONFIG_TX_DESCR_NUM    32
+#define CONFIG_RX_DESCR_NUM    32
+#define CONFIG_ETH_BUFSIZE     2024
+
+#define TX_TOTAL_BUFSIZE       (CONFIG_ETH_BUFSIZE * CONFIG_TX_DESCR_NUM)
+#define RX_TOTAL_BUFSIZE       (CONFIG_ETH_BUFSIZE * CONFIG_RX_DESCR_NUM)
+
+#define H3_EPHY_DEFAULT_VALUE  0x58000
+#define H3_EPHY_DEFAULT_MASK   GENMASK(31, 15)
+#define H3_EPHY_ADDR_SHIFT     20
+#define REG_PHY_ADDR_MASK      GENMASK(4, 0)
+#define H3_EPHY_LED_POL                BIT(17) /* 1: active low, 0: active high */
+#define H3_EPHY_SHUTDOWN       BIT(16) /* 1: shutdown, 0: power up */
+#define H3_EPHY_SELECT         BIT(15) /* 1: internal PHY, 0: external PHY */
+
+#define SC_RMII_EN             BIT(13)
+#define SC_EPIT                        BIT(2) /* 1: RGMII, 0: MII */
+#define SC_ETCS_MASK           GENMASK(1, 0)
+#define SC_ETCS_EXT_GMII       0x1
+#define SC_ETCS_INT_GMII       0x2
+
+#define CONFIG_MDIO_TIMEOUT    (3 * CONFIG_SYS_HZ)
+
+#define AHB_GATE_OFFSET_EPHY   0
+
+#if defined(CONFIG_MACH_SUN8I_H3)
+#define SUN8I_GPD8_GMAC                2
+#else
+#define SUN8I_GPD8_GMAC                4
+#endif
+
+/* H3/A64 EMAC Register's offset */
+#define EMAC_CTL0              0x00
+#define EMAC_CTL1              0x04
+#define EMAC_INT_STA           0x08
+#define EMAC_INT_EN            0x0c
+#define EMAC_TX_CTL0           0x10
+#define EMAC_TX_CTL1           0x14
+#define EMAC_TX_FLOW_CTL       0x1c
+#define EMAC_TX_DMA_DESC       0x20
+#define EMAC_RX_CTL0           0x24
+#define EMAC_RX_CTL1           0x28
+#define EMAC_RX_DMA_DESC       0x34
+#define EMAC_MII_CMD           0x48
+#define EMAC_MII_DATA          0x4c
+#define EMAC_ADDR0_HIGH                0x50
+#define EMAC_ADDR0_LOW         0x54
+#define EMAC_TX_DMA_STA                0xb0
+#define EMAC_TX_CUR_DESC       0xb4
+#define EMAC_TX_CUR_BUF                0xb8
+#define EMAC_RX_DMA_STA                0xc0
+#define EMAC_RX_CUR_DESC       0xc4
+
+DECLARE_GLOBAL_DATA_PTR;
+
+enum emac_variant {
+       A83T_EMAC = 1,
+       H3_EMAC,
+       A64_EMAC,
+};
+
+struct emac_dma_desc {
+       u32 status;
+       u32 st;
+       u32 buf_addr;
+       u32 next;
+} __aligned(ARCH_DMA_MINALIGN);
+
+struct emac_eth_dev {
+       struct emac_dma_desc rx_chain[CONFIG_TX_DESCR_NUM];
+       struct emac_dma_desc tx_chain[CONFIG_RX_DESCR_NUM];
+       char rxbuffer[RX_TOTAL_BUFSIZE] __aligned(ARCH_DMA_MINALIGN);
+       char txbuffer[TX_TOTAL_BUFSIZE] __aligned(ARCH_DMA_MINALIGN);
+
+       u32 interface;
+       u32 phyaddr;
+       u32 link;
+       u32 speed;
+       u32 duplex;
+       u32 phy_configured;
+       u32 tx_currdescnum;
+       u32 rx_currdescnum;
+       u32 addr;
+       u32 tx_slot;
+       bool use_internal_phy;
+
+       enum emac_variant variant;
+       void *mac_reg;
+       phys_addr_t sysctl_reg;
+       struct phy_device *phydev;
+       struct mii_dev *bus;
+};
+
+static int sun8i_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
+{
+       struct emac_eth_dev *priv = bus->priv;
+       ulong start;
+       u32 miiaddr = 0;
+       int timeout = CONFIG_MDIO_TIMEOUT;
+
+       miiaddr &= ~MDIO_CMD_MII_WRITE;
+       miiaddr &= ~MDIO_CMD_MII_PHY_REG_ADDR_MASK;
+       miiaddr |= (reg << MDIO_CMD_MII_PHY_REG_ADDR_SHIFT) &
+               MDIO_CMD_MII_PHY_REG_ADDR_MASK;
+
+       miiaddr &= ~MDIO_CMD_MII_PHY_ADDR_MASK;
+
+       miiaddr |= (addr << MDIO_CMD_MII_PHY_ADDR_SHIFT) &
+               MDIO_CMD_MII_PHY_ADDR_MASK;
+
+       miiaddr |= MDIO_CMD_MII_BUSY;
+
+       writel(miiaddr, priv->mac_reg + EMAC_MII_CMD);
+
+       start = get_timer(0);
+       while (get_timer(start) < timeout) {
+               if (!(readl(priv->mac_reg + EMAC_MII_CMD) & MDIO_CMD_MII_BUSY))
+                       return readl(priv->mac_reg + EMAC_MII_DATA);
+               udelay(10);
+       };
+
+       return -1;
+}
+
+static int sun8i_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,
+                           u16 val)
+{
+       struct emac_eth_dev *priv = bus->priv;
+       ulong start;
+       u32 miiaddr = 0;
+       int ret = -1, timeout = CONFIG_MDIO_TIMEOUT;
+
+       miiaddr &= ~MDIO_CMD_MII_PHY_REG_ADDR_MASK;
+       miiaddr |= (reg << MDIO_CMD_MII_PHY_REG_ADDR_SHIFT) &
+               MDIO_CMD_MII_PHY_REG_ADDR_MASK;
+
+       miiaddr &= ~MDIO_CMD_MII_PHY_ADDR_MASK;
+       miiaddr |= (addr << MDIO_CMD_MII_PHY_ADDR_SHIFT) &
+               MDIO_CMD_MII_PHY_ADDR_MASK;
+
+       miiaddr |= MDIO_CMD_MII_WRITE;
+       miiaddr |= MDIO_CMD_MII_BUSY;
+
+       writel(miiaddr, priv->mac_reg + EMAC_MII_CMD);
+       writel(val, priv->mac_reg + EMAC_MII_DATA);
+
+       start = get_timer(0);
+       while (get_timer(start) < timeout) {
+               if (!(readl(priv->mac_reg + EMAC_MII_CMD) &
+                                       MDIO_CMD_MII_BUSY)) {
+                       ret = 0;
+                       break;
+               }
+               udelay(10);
+       };
+
+       return ret;
+}
+
+static int _sun8i_write_hwaddr(struct emac_eth_dev *priv, u8 *mac_id)
+{
+       u32 macid_lo, macid_hi;
+
+       macid_lo = mac_id[0] + (mac_id[1] << 8) + (mac_id[2] << 16) +
+               (mac_id[3] << 24);
+       macid_hi = mac_id[4] + (mac_id[5] << 8);
+
+       writel(macid_hi, priv->mac_reg + EMAC_ADDR0_HIGH);
+       writel(macid_lo, priv->mac_reg + EMAC_ADDR0_LOW);
+
+       return 0;
+}
+
+static void sun8i_adjust_link(struct emac_eth_dev *priv,
+                             struct phy_device *phydev)
+{
+       u32 v;
+
+       v = readl(priv->mac_reg + EMAC_CTL0);
+
+       if (phydev->duplex)
+               v |= BIT(0);
+       else
+               v &= ~BIT(0);
+
+       v &= ~0x0C;
+
+       switch (phydev->speed) {
+       case 1000:
+               break;
+       case 100:
+               v |= BIT(2);
+               v |= BIT(3);
+               break;
+       case 10:
+               v |= BIT(3);
+               break;
+       }
+       writel(v, priv->mac_reg + EMAC_CTL0);
+}
+
+static int sun8i_emac_set_syscon_ephy(struct emac_eth_dev *priv, u32 *reg)
+{
+       if (priv->use_internal_phy) {
+               /* H3 based SoC's that has an Internal 100MBit PHY
+                * needs to be configured and powered up before use
+               */
+               *reg &= ~H3_EPHY_DEFAULT_MASK;
+               *reg |=  H3_EPHY_DEFAULT_VALUE;
+               *reg |= priv->phyaddr << H3_EPHY_ADDR_SHIFT;
+               *reg &= ~H3_EPHY_SHUTDOWN;
+               *reg |= H3_EPHY_SELECT;
+       } else
+               /* This is to select External Gigabit PHY on
+                * the boards with H3 SoC.
+               */
+               *reg &= ~H3_EPHY_SELECT;
+
+       return 0;
+}
+
+static int sun8i_emac_set_syscon(struct emac_eth_dev *priv)
+{
+       int ret;
+       u32 reg;
+
+       reg = readl(priv->sysctl_reg);
+
+       if (priv->variant == H3_EMAC) {
+               ret = sun8i_emac_set_syscon_ephy(priv, &reg);
+               if (ret)
+                       return ret;
+       }
+
+       reg &= ~(SC_ETCS_MASK | SC_EPIT);
+       if (priv->variant == H3_EMAC || priv->variant == A64_EMAC)
+               reg &= ~SC_RMII_EN;
+
+       switch (priv->interface) {
+       case PHY_INTERFACE_MODE_MII:
+               /* default */
+               break;
+       case PHY_INTERFACE_MODE_RGMII:
+               reg |= SC_EPIT | SC_ETCS_INT_GMII;
+               break;
+       case PHY_INTERFACE_MODE_RMII:
+               if (priv->variant == H3_EMAC ||
+                   priv->variant == A64_EMAC) {
+                       reg |= SC_RMII_EN | SC_ETCS_EXT_GMII;
+               break;
+               }
+               /* RMII not supported on A83T */
+       default:
+               debug("%s: Invalid PHY interface\n", __func__);
+               return -EINVAL;
+       }
+
+       writel(reg, priv->sysctl_reg);
+
+       return 0;
+}
+
+static int sun8i_phy_init(struct emac_eth_dev *priv, void *dev)
+{
+       struct phy_device *phydev;
+
+       phydev = phy_connect(priv->bus, priv->phyaddr, dev, priv->interface);
+       if (!phydev)
+               return -ENODEV;
+
+       phy_connect_dev(phydev, dev);
+
+       priv->phydev = phydev;
+       phy_config(priv->phydev);
+
+       return 0;
+}
+
+static void rx_descs_init(struct emac_eth_dev *priv)
+{
+       struct emac_dma_desc *desc_table_p = &priv->rx_chain[0];
+       char *rxbuffs = &priv->rxbuffer[0];
+       struct emac_dma_desc *desc_p;
+       u32 idx;
+
+       /* flush Rx buffers */
+       flush_dcache_range((uintptr_t)rxbuffs, (ulong)rxbuffs +
+                       RX_TOTAL_BUFSIZE);
+
+       for (idx = 0; idx < CONFIG_RX_DESCR_NUM; idx++) {
+               desc_p = &desc_table_p[idx];
+               desc_p->buf_addr = (uintptr_t)&rxbuffs[idx * CONFIG_ETH_BUFSIZE]
+                       ;
+               desc_p->next = (uintptr_t)&desc_table_p[idx + 1];
+               desc_p->st |= CONFIG_ETH_BUFSIZE;
+               desc_p->status = BIT(31);
+       }
+
+       /* Correcting the last pointer of the chain */
+       desc_p->next = (uintptr_t)&desc_table_p[0];
+
+       flush_dcache_range((uintptr_t)priv->rx_chain,
+                          (uintptr_t)priv->rx_chain +
+                       sizeof(priv->rx_chain));
+
+       writel((uintptr_t)&desc_table_p[0], (priv->mac_reg + EMAC_RX_DMA_DESC));
+       priv->rx_currdescnum = 0;
+}
+
+static void tx_descs_init(struct emac_eth_dev *priv)
+{
+       struct emac_dma_desc *desc_table_p = &priv->tx_chain[0];
+       char *txbuffs = &priv->txbuffer[0];
+       struct emac_dma_desc *desc_p;
+       u32 idx;
+
+       for (idx = 0; idx < CONFIG_TX_DESCR_NUM; idx++) {
+               desc_p = &desc_table_p[idx];
+               desc_p->buf_addr = (uintptr_t)&txbuffs[idx * CONFIG_ETH_BUFSIZE]
+                       ;
+               desc_p->next = (uintptr_t)&desc_table_p[idx + 1];
+               desc_p->status = (1 << 31);
+               desc_p->st = 0;
+       }
+
+       /* Correcting the last pointer of the chain */
+       desc_p->next =  (uintptr_t)&desc_table_p[0];
+
+       /* Flush all Tx buffer descriptors */
+       flush_dcache_range((uintptr_t)priv->tx_chain,
+                          (uintptr_t)priv->tx_chain +
+                       sizeof(priv->tx_chain));
+
+       writel((uintptr_t)&desc_table_p[0], priv->mac_reg + EMAC_TX_DMA_DESC);
+       priv->tx_currdescnum = 0;
+}
+
+static int _sun8i_emac_eth_init(struct emac_eth_dev *priv, u8 *enetaddr)
+{
+       u32 reg, v;
+       int timeout = 100;
+
+       reg = readl((priv->mac_reg + EMAC_CTL1));
+
+       if (!(reg & 0x1)) {
+               /* Soft reset MAC */
+               setbits_le32((priv->mac_reg + EMAC_CTL1), 0x1);
+               do {
+                       reg = readl(priv->mac_reg + EMAC_CTL1);
+               } while ((reg & 0x01) != 0 &&  (--timeout));
+               if (!timeout) {
+                       printf("%s: Timeout\n", __func__);
+                       return -1;
+               }
+       }
+
+       /* Rewrite mac address after reset */
+       _sun8i_write_hwaddr(priv, enetaddr);
+
+       v = readl(priv->mac_reg + EMAC_TX_CTL1);
+       /* TX_MD Transmission starts after a full frame located in TX DMA FIFO*/
+       v |= BIT(1);
+       writel(v, priv->mac_reg + EMAC_TX_CTL1);
+
+       v = readl(priv->mac_reg + EMAC_RX_CTL1);
+       /* RX_MD RX DMA reads data from RX DMA FIFO to host memory after a
+        * complete frame has been written to RX DMA FIFO
+        */
+       v |= BIT(1);
+       writel(v, priv->mac_reg + EMAC_RX_CTL1);
+
+       /* DMA */
+       writel(8 << 24, priv->mac_reg + EMAC_CTL1);
+
+       /* Initialize rx/tx descriptors */
+       rx_descs_init(priv);
+       tx_descs_init(priv);
+
+       /* PHY Start Up */
+       genphy_parse_link(priv->phydev);
+
+       sun8i_adjust_link(priv, priv->phydev);
+
+       /* Start RX DMA */
+       v = readl(priv->mac_reg + EMAC_RX_CTL1);
+       v |= BIT(30);
+       writel(v, priv->mac_reg + EMAC_RX_CTL1);
+       /* Start TX DMA */
+       v = readl(priv->mac_reg + EMAC_TX_CTL1);
+       v |= BIT(30);
+       writel(v, priv->mac_reg + EMAC_TX_CTL1);
+
+       /* Enable RX/TX */
+       setbits_le32(priv->mac_reg + EMAC_RX_CTL0, BIT(31));
+       setbits_le32(priv->mac_reg + EMAC_TX_CTL0, BIT(31));
+
+       return 0;
+}
+
+static int parse_phy_pins(struct udevice *dev)
+{
+       int offset;
+       const char *pin_name;
+       int drive, pull, i;
+
+       offset = fdtdec_lookup_phandle(gd->fdt_blob, dev->of_offset,
+                                      "pinctrl-0");
+       if (offset < 0) {
+               printf("WARNING: emac: cannot find pinctrl-0 node\n");
+               return offset;
+       }
+
+       drive = fdt_getprop_u32_default_node(gd->fdt_blob, offset, 0,
+                                            "allwinner,drive", 4);
+       pull = fdt_getprop_u32_default_node(gd->fdt_blob, offset, 0,
+                                           "allwinner,pull", 0);
+       for (i = 0; ; i++) {
+               int pin;
+
+               if (fdt_get_string_index(gd->fdt_blob, offset,
+                                        "allwinner,pins", i, &pin_name))
+                       break;
+               if (pin_name[0] != 'P')
+                       continue;
+               pin = (pin_name[1] - 'A') << 5;
+               if (pin >= 26 << 5)
+                       continue;
+               pin += simple_strtol(&pin_name[2], NULL, 10);
+
+               sunxi_gpio_set_cfgpin(pin, SUN8I_GPD8_GMAC);
+               sunxi_gpio_set_drv(pin, drive);
+               sunxi_gpio_set_pull(pin, pull);
+       }
+
+       if (!i) {
+               printf("WARNING: emac: cannot find allwinner,pins property\n");
+               return -2;
+       }
+
+       return 0;
+}
+
+static int _sun8i_eth_recv(struct emac_eth_dev *priv, uchar **packetp)
+{
+       u32 status, desc_num = priv->rx_currdescnum;
+       struct emac_dma_desc *desc_p = &priv->rx_chain[desc_num];
+       int length = -EAGAIN;
+       int good_packet = 1;
+       uintptr_t desc_start = (uintptr_t)desc_p;
+       uintptr_t desc_end = desc_start +
+               roundup(sizeof(*desc_p), ARCH_DMA_MINALIGN);
+
+       ulong data_start = (uintptr_t)desc_p->buf_addr;
+       ulong data_end;
+
+       /* Invalidate entire buffer descriptor */
+       invalidate_dcache_range(desc_start, desc_end);
+
+       status = desc_p->status;
+
+       /* Check for DMA own bit */
+       if (!(status & BIT(31))) {
+               length = (desc_p->status >> 16) & 0x3FFF;
+
+               if (length < 0x40) {
+                       good_packet = 0;
+                       debug("RX: Bad Packet (runt)\n");
+               }
+
+               data_end = data_start + length;
+               /* Invalidate received data */
+               invalidate_dcache_range(rounddown(data_start,
+                                                 ARCH_DMA_MINALIGN),
+                                       roundup(data_end,
+                                               ARCH_DMA_MINALIGN));
+               if (good_packet) {
+                       if (length > CONFIG_ETH_BUFSIZE) {
+                               printf("Received packet is too big (len=%d)\n",
+                                      length);
+                               return -EMSGSIZE;
+                       }
+                       *packetp = (uchar *)(ulong)desc_p->buf_addr;
+                       return length;
+               }
+       }
+
+       return length;
+}
+
+static int _sun8i_emac_eth_send(struct emac_eth_dev *priv, void *packet,
+                               int len)
+{
+       u32 v, desc_num = priv->tx_currdescnum;
+       struct emac_dma_desc *desc_p = &priv->tx_chain[desc_num];
+       uintptr_t desc_start = (uintptr_t)desc_p;
+       uintptr_t desc_end = desc_start +
+               roundup(sizeof(*desc_p), ARCH_DMA_MINALIGN);
+
+       uintptr_t data_start = (uintptr_t)desc_p->buf_addr;
+       uintptr_t data_end = data_start +
+               roundup(len, ARCH_DMA_MINALIGN);
+
+       /* Invalidate entire buffer descriptor */
+       invalidate_dcache_range(desc_start, desc_end);
+
+       desc_p->st = len;
+       /* Mandatory undocumented bit */
+       desc_p->st |= BIT(24);
+
+       memcpy((void *)data_start, packet, len);
+
+       /* Flush data to be sent */
+       flush_dcache_range(data_start, data_end);
+
+       /* frame end */
+       desc_p->st |= BIT(30);
+       desc_p->st |= BIT(31);
+
+       /*frame begin */
+       desc_p->st |= BIT(29);
+       desc_p->status = BIT(31);
+
+       /*Descriptors st and status field has changed, so FLUSH it */
+       flush_dcache_range(desc_start, desc_end);
+
+       /* Move to next Descriptor and wrap around */
+       if (++desc_num >= CONFIG_TX_DESCR_NUM)
+               desc_num = 0;
+       priv->tx_currdescnum = desc_num;
+
+       /* Start the DMA */
+       v = readl(priv->mac_reg + EMAC_TX_CTL1);
+       v |= BIT(31);/* mandatory */
+       v |= BIT(30);/* mandatory */
+       writel(v, priv->mac_reg + EMAC_TX_CTL1);
+
+       return 0;
+}
+
+static int sun8i_eth_write_hwaddr(struct udevice *dev)
+{
+       struct eth_pdata *pdata = dev_get_platdata(dev);
+       struct emac_eth_dev *priv = dev_get_priv(dev);
+
+       return _sun8i_write_hwaddr(priv, pdata->enetaddr);
+}
+
+static void sun8i_emac_board_setup(struct emac_eth_dev *priv)
+{
+       struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+       if (priv->use_internal_phy) {
+               /* Set clock gating for ephy */
+               setbits_le32(&ccm->bus_gate4, BIT(AHB_GATE_OFFSET_EPHY));
+
+               /* Set Tx clock source as MII with rate 25 MZ */
+               setbits_le32(priv->sysctl_reg, SCTL_EMAC_TX_CLK_SRC_MII |
+                               SCTL_EMAC_EPIT_MII | SCTL_EMAC_CLK_SEL);
+               /* Deassert EPHY */
+               setbits_le32(&ccm->ahb_reset2_cfg, BIT(AHB_RESET_OFFSET_EPHY));
+       }
+
+       /* Set clock gating for emac */
+       setbits_le32(&ccm->ahb_gate0, BIT(AHB_GATE_OFFSET_GMAC));
+
+       /* Set EMAC clock */
+       setbits_le32(&ccm->axi_gate, (BIT(1) | BIT(0)));
+
+       /* De-assert EMAC */
+       setbits_le32(&ccm->ahb_reset0_cfg, BIT(AHB_RESET_OFFSET_GMAC));
+}
+
+static int sun8i_mdio_init(const char *name, struct  emac_eth_dev *priv)
+{
+       struct mii_dev *bus = mdio_alloc();
+
+       if (!bus) {
+               debug("Failed to allocate MDIO bus\n");
+               return -ENOMEM;
+       }
+
+       bus->read = sun8i_mdio_read;
+       bus->write = sun8i_mdio_write;
+       snprintf(bus->name, sizeof(bus->name), name);
+       bus->priv = (void *)priv;
+
+       return  mdio_register(bus);
+}
+
+static int sun8i_emac_eth_start(struct udevice *dev)
+{
+       struct eth_pdata *pdata = dev_get_platdata(dev);
+
+       return _sun8i_emac_eth_init(dev->priv, pdata->enetaddr);
+}
+
+static int sun8i_emac_eth_send(struct udevice *dev, void *packet, int length)
+{
+       struct emac_eth_dev *priv = dev_get_priv(dev);
+
+       return _sun8i_emac_eth_send(priv, packet, length);
+}
+
+static int sun8i_emac_eth_recv(struct udevice *dev, int flags, uchar **packetp)
+{
+       struct emac_eth_dev *priv = dev_get_priv(dev);
+
+       return _sun8i_eth_recv(priv, packetp);
+}
+
+static int _sun8i_free_pkt(struct emac_eth_dev *priv)
+{
+       u32 desc_num = priv->rx_currdescnum;
+       struct emac_dma_desc *desc_p = &priv->rx_chain[desc_num];
+       uintptr_t desc_start = (uintptr_t)desc_p;
+       uintptr_t desc_end = desc_start +
+               roundup(sizeof(u32), ARCH_DMA_MINALIGN);
+
+       /* Make the current descriptor valid again */
+       desc_p->status |= BIT(31);
+
+       /* Flush Status field of descriptor */
+       flush_dcache_range(desc_start, desc_end);
+
+       /* Move to next desc and wrap-around condition. */
+       if (++desc_num >= CONFIG_RX_DESCR_NUM)
+               desc_num = 0;
+       priv->rx_currdescnum = desc_num;
+
+       return 0;
+}
+
+static int sun8i_eth_free_pkt(struct udevice *dev, uchar *packet,
+                             int length)
+{
+       struct emac_eth_dev *priv = dev_get_priv(dev);
+
+       return _sun8i_free_pkt(priv);
+}
+
+static void sun8i_emac_eth_stop(struct udevice *dev)
+{
+       struct emac_eth_dev *priv = dev_get_priv(dev);
+
+       /* Stop Rx/Tx transmitter */
+       clrbits_le32(priv->mac_reg + EMAC_RX_CTL0, BIT(31));
+       clrbits_le32(priv->mac_reg + EMAC_TX_CTL0, BIT(31));
+
+       /* Stop TX DMA */
+       clrbits_le32(priv->mac_reg + EMAC_TX_CTL1, BIT(30));
+
+       phy_shutdown(priv->phydev);
+}
+
+static int sun8i_emac_eth_probe(struct udevice *dev)
+{
+       struct eth_pdata *pdata = dev_get_platdata(dev);
+       struct emac_eth_dev *priv = dev_get_priv(dev);
+
+       priv->mac_reg = (void *)pdata->iobase;
+
+       sun8i_emac_board_setup(priv);
+
+       sun8i_mdio_init(dev->name, priv);
+       priv->bus = miiphy_get_dev_by_name(dev->name);
+
+       sun8i_emac_set_syscon(priv);
+
+       return sun8i_phy_init(priv, dev);
+}
+
+static const struct eth_ops sun8i_emac_eth_ops = {
+       .start                  = sun8i_emac_eth_start,
+       .write_hwaddr           = sun8i_eth_write_hwaddr,
+       .send                   = sun8i_emac_eth_send,
+       .recv                   = sun8i_emac_eth_recv,
+       .free_pkt               = sun8i_eth_free_pkt,
+       .stop                   = sun8i_emac_eth_stop,
+};
+
+static int sun8i_emac_eth_ofdata_to_platdata(struct udevice *dev)
+{
+       struct eth_pdata *pdata = dev_get_platdata(dev);
+       struct emac_eth_dev *priv = dev_get_priv(dev);
+       const char *phy_mode;
+       int offset = 0;
+
+       pdata->iobase = dev_get_addr_name(dev, "emac");
+       priv->sysctl_reg = dev_get_addr_name(dev, "syscon");
+
+       pdata->phy_interface = -1;
+       priv->phyaddr = -1;
+       priv->use_internal_phy = false;
+
+       offset = fdtdec_lookup_phandle(gd->fdt_blob, dev->of_offset,
+                                      "phy");
+       if (offset > 0)
+               priv->phyaddr = fdtdec_get_int(gd->fdt_blob, offset, "reg",
+                                              -1);
+
+       phy_mode = fdt_getprop(gd->fdt_blob, dev->of_offset, "phy-mode", NULL);
+
+       if (phy_mode)
+               pdata->phy_interface = phy_get_interface_by_name(phy_mode);
+       printf("phy interface%d\n", pdata->phy_interface);
+
+       if (pdata->phy_interface == -1) {
+               debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
+               return -EINVAL;
+       }
+
+       priv->variant = dev_get_driver_data(dev);
+
+       if (!priv->variant) {
+               printf("%s: Missing variant '%s'\n", __func__,
+                      (char *)priv->variant);
+               return -EINVAL;
+       }
+
+       if (priv->variant == H3_EMAC) {
+               if (fdt_getprop(gd->fdt_blob, dev->of_offset,
+                               "allwinner,use-internal-phy", NULL))
+                       priv->use_internal_phy = true;
+       }
+
+       priv->interface = pdata->phy_interface;
+
+       if (!priv->use_internal_phy)
+               parse_phy_pins(dev);
+
+       return 0;
+}
+
+static const struct udevice_id sun8i_emac_eth_ids[] = {
+       {.compatible = "allwinner,sun8i-h3-emac", .data = (uintptr_t)H3_EMAC },
+       {.compatible = "allwinner,sun50i-a64-emac",
+               .data = (uintptr_t)A64_EMAC },
+       {.compatible = "allwinner,sun8i-a83t-emac",
+               .data = (uintptr_t)A83T_EMAC },
+       { }
+};
+
+U_BOOT_DRIVER(eth_sun8i_emac) = {
+       .name   = "eth_sun8i_emac",
+       .id     = UCLASS_ETH,
+       .of_match = sun8i_emac_eth_ids,
+       .ofdata_to_platdata = sun8i_emac_eth_ofdata_to_platdata,
+       .probe  = sun8i_emac_eth_probe,
+       .ops    = &sun8i_emac_eth_ops,
+       .priv_auto_alloc_size = sizeof(struct emac_eth_dev),
+       .platdata_auto_alloc_size = sizeof(struct eth_pdata),
+       .flags = DM_FLAG_ALLOC_PRIV_DMA,
+};