ARM: OMAP5: Add SATA platform glue

Add platform glue logic for the SATA controller.

Signed-off-by: Roger Quadros <rogerq@ti.com>

diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index bfaf814b8033fed581e64ddb4c9b0611010742cc..679c1a18a4545a176f9798b1897822a4ace2e09e 100644 (file)
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -19,6 +19,7 @@ endif
 
 ifneq ($(CONFIG_OMAP54XX),)
 COBJS  += pipe3-phy.o
+obj-$(CONFIG_SCSI_AHCI_PLAT) += sata.o
 endif
 
 ifeq ($(CONFIG_OMAP34XX),)

diff --git a/arch/arm/cpu/armv7/omap-common/sata.c b/arch/arm/cpu/armv7/omap-common/sata.c
new file mode 100644 (file)
index 0000000..f5468c4
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap-common/sata.c
@@ -0,0 +1,75 @@
+/*
+ * TI SATA platform driver
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <ahci.h>
+#include <scsi.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sata.h>
+#include <asm/io.h>
+#include "pipe3-phy.h"
+
+static struct pipe3_dpll_map dpll_map_sata[] = {
+       {12000000, {1000, 7, 4, 6, 0} },        /* 12 MHz */
+       {16800000, {714, 7, 4, 6, 0} },         /* 16.8 MHz */
+       {19200000, {625, 7, 4, 6, 0} },         /* 19.2 MHz */
+       {20000000, {600, 7, 4, 6, 0} },         /* 20 MHz */
+       {26000000, {461, 7, 4, 6, 0} },         /* 26 MHz */
+       {38400000, {312, 7, 4, 6, 0} },         /* 38.4 MHz */
+       { },                                    /* Terminator */
+};
+
+struct omap_pipe3 sata_phy = {
+       .pll_ctrl_base = (void __iomem *)TI_SATA_PLLCTRL_BASE,
+       /* .power_reg is updated at runtime */
+       .dpll_map = dpll_map_sata,
+};
+
+int omap_sata_init(void)
+{
+       int ret;
+       u32 val;
+
+       u32 const clk_domains_sata[] = {
+               0
+       };
+
+       u32 const clk_modules_hw_auto_sata[] = {
+               (*prcm)->cm_l3init_ocp2scp3_clkctrl,
+               0
+       };
+
+       u32 const clk_modules_explicit_en_sata[] = {
+               (*prcm)->cm_l3init_sata_clkctrl,
+               0
+       };
+
+       do_enable_clocks(clk_domains_sata,
+                        clk_modules_hw_auto_sata,
+                        clk_modules_explicit_en_sata,
+                        0);
+
+       /* Enable optional functional clock for SATA */
+       setbits_le32((*prcm)->cm_l3init_sata_clkctrl,
+                    SATA_CLKCTRL_OPTFCLKEN_MASK);
+
+       sata_phy.power_reg = (void __iomem *)(*ctrl)->control_phy_power_sata;
+
+       /* Power up the PHY */
+       phy_pipe3_power_on(&sata_phy);
+
+       /* Enable SATA module, No Idle, No Standby */
+       val = TI_SATA_IDLE_NO | TI_SATA_STANDBY_NO;
+       writel(val, TI_SATA_WRAPPER_BASE + TI_SATA_SYSCONFIG);
+
+       ret = ahci_init(DWC_AHSATA_BASE);
+       scsi_scan(1);
+
+       return ret;
+}

diff --git a/arch/arm/include/asm/arch-omap5/sata.h b/arch/arm/include/asm/arch-omap5/sata.h
new file mode 100644 (file)
index 0000000..2ca8947
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap5/sata.h
@@ -0,0 +1,48 @@
+/*
+ * SATA Wrapper Register map
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef _TI_SATA_H
+#define _TI_SATA_H
+
+/* SATA Wrapper module */
+#define TI_SATA_WRAPPER_BASE           (OMAP54XX_L4_CORE_BASE + 0x141100)
+/* SATA PHY Module */
+#define TI_SATA_PLLCTRL_BASE           (OMAP54XX_L4_CORE_BASE + 0x96800)
+
+/* SATA Wrapper register offsets */
+#define TI_SATA_SYSCONFIG                      0x00
+#define TI_SATA_CDRLOCK                                0x04
+
+/* Register Set */
+#define TI_SATA_SYSCONFIG_OVERRIDE0            (1 << 16)
+#define TI_SATA_SYSCONFIG_STANDBY_MASK         (0x3 << 4)
+#define TI_SATA_SYSCONFIG_IDLE_MASK            (0x3 << 2)
+
+/* Standby modes */
+#define TI_SATA_STANDBY_FORCE                  0x0
+#define TI_SATA_STANDBY_NO                     (0x1 << 4)
+#define TI_SATA_STANDBY_SMART_WAKE             (0x3 << 4)
+#define TI_SATA_STANDBY_SMART                  (0x2 << 4)
+
+/* Idle modes */
+#define TI_SATA_IDLE_FORCE                     0x0
+#define TI_SATA_IDLE_NO                                (0x1 << 2)
+#define TI_SATA_IDLE_SMART_WAKE                        (0x3 << 2)
+#define TI_SATA_IDLE_SMART                     (0x2 << 2)
+
+#ifdef CONFIG_SCSI_AHCI_PLAT
+int omap_sata_init(void);
+#else
+static inline int omap_sata_init(void)
+{
+       return 0;
+}
+#endif /* CONFIG_SCSI_AHCI_PLAT */
+
+#endif /* _TI_SATA_H */