nand: zynq: Send address cycles as per onfi parameter page

Send address cycles as per value read from onfi parameter
page for Read and write commands instead of using a
hard coded value. This may vary for different parts and
hence use it from onfi parameter page value.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/drivers/mtd/nand/zynq_nand.c b/drivers/mtd/nand/zynq_nand.c
index 4d0ea9e6b9dafd023f0edd65a1d8dba7458847d6..e932a58bf6034238cd9cf7ec97bf28c35e94580a 100644 (file)
--- a/drivers/mtd/nand/zynq_nand.c
+++ b/drivers/mtd/nand/zynq_nand.c
@@ -84,6 +84,9 @@
 #define ZYNQ_NAND_ECC_BUSY     (1 << 6)        /* ECC block is busy */
 #define ZYNQ_NAND_ECC_MASK     0x00FFFFFF      /* ECC value mask */
 
+#define ZYNQ_NAND_ROW_ADDR_CYCL_MASK   0x0F
+#define ZYNQ_NAND_COL_ADDR_CYCL_MASK   0xF0
+
 #define ZYNQ_NAND_MIO_NUM_NAND_8BIT    13
 #define ZYNQ_NAND_MIO_NUM_NAND_16BIT   8
 
@@ -778,6 +781,7 @@ static void zynq_nand_cmd_function(struct mtd_info *mtd, unsigned int command,
 {
        struct nand_chip *chip = mtd->priv;
        const struct zynq_nand_command_format *curr_cmd = NULL;
+       u8 addr_cycles = 0;
        struct zynq_nand_info *xnand = (struct zynq_nand_info *)chip->priv;
        void *cmd_addr;
        unsigned long cmd_data = 0;
@@ -828,8 +832,18 @@ static void zynq_nand_cmd_function(struct mtd_info *mtd, unsigned int command,
        else
                end_cmd = curr_cmd->end_cmd;
 
+       if (command == NAND_CMD_READ0 ||
+           command == NAND_CMD_SEQIN) {
+               addr_cycles = chip->onfi_params.addr_cycles &
+                               ZYNQ_NAND_ROW_ADDR_CYCL_MASK;
+               addr_cycles += ((chip->onfi_params.addr_cycles &
+                               ZYNQ_NAND_COL_ADDR_CYCL_MASK) >> 4);
+       } else {
+               addr_cycles = curr_cmd->addr_cycles;
+       }
+
        cmd_phase_addr = (unsigned long)xnand->nand_base        |
-                       (curr_cmd->addr_cycles << ADDR_CYCLES_SHIFT)    |
+                       (addr_cycles << ADDR_CYCLES_SHIFT)      |
                        (end_cmd_valid << END_CMD_VALID_SHIFT)          |
                        (COMMAND_PHASE)                                 |
                        (end_cmd << END_CMD_SHIFT)                      |