]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
pico-imx7d: Add LCD support
authorFabio Estevam <festevam@gmail.com>
Tue, 11 Dec 2018 18:40:38 +0000 (16:40 -0200)
committerStefano Babic <sbabic@denx.de>
Mon, 28 Jan 2019 11:53:48 +0000 (12:53 +0100)
Add support for the VXT VL050-8048NT-C01 panel connected through
the 24 bit parallel LCDIF interface.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
board/technexion/pico-imx7d/pico-imx7d.c
configs/pico-hobbit-imx7d_defconfig
configs/pico-imx7d_defconfig
configs/pico-pi-imx7d_defconfig
include/configs/pico-imx7d.h

index 53e14693a5326d5e8a76f5cb2a2ced56f363a79e..767d13dfe5dc520cc5845308c783d47691919518 100644 (file)
@@ -39,8 +39,16 @@ DECLARE_GLOBAL_DATA_PTR;
 #define I2C_PAD_CTRL    (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
        PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU100KOHM)
 
+
+#define LCD_PAD_CTRL    (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \
+                        PAD_CTL_DSE_3P3V_49OHM)
+
+#define LCD_SYNC_PAD_CTRL    (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \
+                             PAD_CTL_DSE_3P3V_196OHM)
+
 #ifdef CONFIG_SYS_I2C_MXC
 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
+
 /* I2C4 for PMIC */
 static struct i2c_pads_info i2c_pad_info4 = {
        .scl = {
@@ -246,11 +254,58 @@ int board_early_init_f(void)
        return 0;
 }
 
+#ifdef CONFIG_VIDEO_MXS
+static iomux_v3_cfg_t const lcd_pads[] = {
+       MX7D_PAD_LCD_CLK__LCD_CLK | MUX_PAD_CTRL(LCD_PAD_CTRL),
+       MX7D_PAD_LCD_ENABLE__LCD_ENABLE | MUX_PAD_CTRL(LCD_SYNC_PAD_CTRL),
+       MX7D_PAD_LCD_HSYNC__LCD_HSYNC | MUX_PAD_CTRL(LCD_SYNC_PAD_CTRL),
+       MX7D_PAD_LCD_VSYNC__LCD_VSYNC | MUX_PAD_CTRL(LCD_SYNC_PAD_CTRL),
+       MX7D_PAD_LCD_DATA00__LCD_DATA0 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+       MX7D_PAD_LCD_DATA01__LCD_DATA1 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+       MX7D_PAD_LCD_DATA02__LCD_DATA2 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+       MX7D_PAD_LCD_DATA03__LCD_DATA3 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+       MX7D_PAD_LCD_DATA04__LCD_DATA4 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+       MX7D_PAD_LCD_DATA05__LCD_DATA5 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+       MX7D_PAD_LCD_DATA06__LCD_DATA6 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+       MX7D_PAD_LCD_DATA07__LCD_DATA7 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+       MX7D_PAD_LCD_DATA08__LCD_DATA8 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+       MX7D_PAD_LCD_DATA09__LCD_DATA9 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+       MX7D_PAD_LCD_DATA10__LCD_DATA10 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+       MX7D_PAD_LCD_DATA11__LCD_DATA11 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+       MX7D_PAD_LCD_DATA12__LCD_DATA12 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+       MX7D_PAD_LCD_DATA13__LCD_DATA13 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+       MX7D_PAD_LCD_DATA14__LCD_DATA14 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+       MX7D_PAD_LCD_DATA15__LCD_DATA15 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+       MX7D_PAD_LCD_DATA16__LCD_DATA16 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+       MX7D_PAD_LCD_DATA17__LCD_DATA17 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+       MX7D_PAD_LCD_DATA18__LCD_DATA18 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+       MX7D_PAD_LCD_DATA19__LCD_DATA19 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+       MX7D_PAD_LCD_DATA20__LCD_DATA20 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+       MX7D_PAD_LCD_DATA21__LCD_DATA21 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+       MX7D_PAD_LCD_DATA22__LCD_DATA22 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+       MX7D_PAD_LCD_DATA23__LCD_DATA23 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+       MX7D_PAD_GPIO1_IO06__GPIO1_IO6  | MUX_PAD_CTRL(LCD_PAD_CTRL),
+       MX7D_PAD_GPIO1_IO11__GPIO1_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+void setup_lcd(void)
+{
+       imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
+       /* Set Brightness to high */
+       gpio_direction_output(IMX_GPIO_NR(1, 11) , 1);
+       /* Set LCD enable to high */
+       gpio_direction_output(IMX_GPIO_NR(1, 6) , 1);
+}
+#endif
+
 int board_init(void)
 {
        /* address of boot parameters */
        gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 
+#ifdef CONFIG_VIDEO_MXS
+       setup_lcd();
+#endif
 #ifdef CONFIG_FEC_MXC
        setup_fec();
 #endif
index cb4a6bf0bbfd9a022ff7266ee3fe78368d69fab9..f58d5171ba30c686dc38fbecc829e004ee40902f 100644 (file)
@@ -57,4 +57,5 @@ CONFIG_USB_GADGET_MANUFACTURER="FSL"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0525
 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
+CONFIG_VIDEO=y
 CONFIG_OF_LIBFDT=y
index f90d75787ac56c09abdd52f505d8e7449439d084..7e13923cb43a539013f4f2c26f260a488d9d2f70 100644 (file)
@@ -57,4 +57,5 @@ CONFIG_USB_GADGET_MANUFACTURER="FSL"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0525
 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
+CONFIG_VIDEO=y
 CONFIG_OF_LIBFDT=y
index 8e48ba71bee9f359a43d419f520d059a2f1dd9e0..c8ac2ffd5f473520755fdc223d6e01b62a1b8f26 100644 (file)
@@ -57,4 +57,5 @@ CONFIG_USB_GADGET_MANUFACTURER="FSL"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0525
 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
+CONFIG_VIDEO=y
 CONFIG_OF_LIBFDT=y
index 1884c5844de8f6455854df9093ad8e0b0bed0519..0f6d6b789454607e28e64e8294ae6954177fd847 100644 (file)
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "script=boot.scr\0" \
        "image=zImage\0" \
+       "splashpos=m,m\0" \
        "console=ttymxc4\0" \
        "fdt_high=0xffffffff\0" \
        "initrd_high=0xffffffff\0" \
        "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
+       "videomode=video=ctfb:x:800,y:480,depth:24,mode:0,pclk:30000,le:46,ri:210,up:22,lo:23,hs:20,vs:10,sync:0,vmode:0\0" \
        BOOTMENU_ENV \
        "fdt_addr=0x83000000\0" \
        "fdt_addr_r=0x83000000\0" \
 #define CONFIG_POWER_PFUZE3000
 #define CONFIG_POWER_PFUZE3000_I2C_ADDR        0x08
 
+#ifdef CONFIG_VIDEO
+#define CONFIG_VIDEO_MXS
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_VIDEO_BMP_LOGO
+#endif
+
 /* FLASH and environment organization */
 #define CONFIG_ENV_SIZE                        SZ_8K