sun50i-h6-pine-h64-model-b.dtb \
sun50i-h6-tanix-tx6.dtb \
sun50i-h6-tanix-tx6-mini.dtb
-dtb-$(CONFIG_MACH_SUN50I_H616) += \
- sun50i-h313-tanix-tx1.dtb \
- sun50i-h616-orangepi-zero2.dtb \
- sun50i-h618-orangepi-zero2w.dtb \
- sun50i-h618-orangepi-zero3.dtb \
- sun50i-h618-transpeed-8k618-t.dtb \
- sun50i-h616-x96-mate.dtb
dtb-$(CONFIG_MACH_SUN50I) += \
sun50i-a64-amarula-relic.dtb \
sun50i-a64-bananapi-m64.dtb \
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2024 Arm Ltd.
- */
-
-/dts-v1/;
-
-#include "sun50i-h616.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- model = "Tanix TX1";
- compatible = "oranth,tanix-tx1", "allwinner,sun50i-h616";
-
- aliases {
- serial0 = &uart0;
- ethernet0 = &sdio_wifi;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- key {
- label = "hidden";
- linux,code = <BTN_0>;
- gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 */
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-0 {
- function = LED_FUNCTION_POWER;
- color = <LED_COLOR_ID_BLUE>;
- gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
- default-state = "on";
- };
- };
-
- wifi_pwrseq: pwrseq {
- compatible = "mmc-pwrseq-simple";
- clocks = <&rtc CLK_OSC32K_FANOUT>;
- clock-names = "ext_clock";
- pinctrl-0 = <&x32clk_fanout_pin>;
- pinctrl-names = "default";
- reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
- };
-
- reg_vcc5v: vcc5v {
- /* board wide 5V supply directly from the DC input */
- compatible = "regulator-fixed";
- regulator-name = "vcc-5v";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-};
-
-&cpu0 {
- cpu-supply = <®_dcdc2>;
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ir {
- status = "okay";
-};
-
-&mmc1 {
- vmmc-supply = <®_dldo1>;
- vqmmc-supply = <®_aldo1>;
- mmc-pwrseq = <&wifi_pwrseq>;
- bus-width = <4>;
- non-removable;
- status = "okay";
-
- sdio_wifi: wifi@1 {
- reg = <1>;
- };
-};
-
-&mmc2 {
- vmmc-supply = <®_dldo1>;
- vqmmc-supply = <®_aldo1>;
- bus-width = <8>;
- non-removable;
- max-frequency = <100000000>;
- cap-mmc-hw-reset;
- mmc-ddr-1_8v;
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&pio {
- vcc-pc-supply = <®_aldo1>;
- vcc-pf-supply = <®_dldo1>;
- vcc-pg-supply = <®_aldo1>;
- vcc-ph-supply = <®_dldo1>;
- vcc-pi-supply = <®_dldo1>;
-};
-
-&r_i2c {
- status = "okay";
-
- axp313: pmic@36 {
- compatible = "x-powers,axp313a";
- reg = <0x36>;
- #interrupt-cells = <1>;
- interrupt-controller;
-
- vin1-supply = <®_vcc5v>;
- vin2-supply = <®_vcc5v>;
- vin3-supply = <®_vcc5v>;
-
- regulators {
- /* Supplies VCC-PLL, so needs to be always on. */
- reg_aldo1: aldo1 {
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc1v8";
- };
-
- /* Supplies VCC-IO, so needs to be always on. */
- reg_dldo1: dldo1 {
- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc3v3";
- };
-
- reg_dcdc1: dcdc1 {
- regulator-always-on;
- regulator-min-microvolt = <810000>;
- regulator-max-microvolt = <990000>;
- regulator-name = "vdd-gpu-sys";
- };
-
- reg_dcdc2: dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <810000>;
- regulator-max-microvolt = <1120000>;
- regulator-name = "vdd-cpu";
- };
-
- reg_dcdc3: dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-name = "vdd-dram";
- };
- };
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_ph_pins>;
- status = "okay";
-};
-
-&usbotg {
- dr_mode = "host"; /* USB A type receptable */
- status = "okay";
-};
-
-&usbphy {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2023 Martin Botka <martin.botka@somainline.org>.
- */
-
-/dts-v1/;
-
-#include "sun50i-h616-bigtreetech-cb1.dtsi"
-
-/ {
- model = "BigTreeTech CB1";
- compatible = "bigtreetech,cb1-manta", "bigtreetech,cb1", "allwinner,sun50i-h616";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_ph_pins>;
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2023 Martin Botka <martin.botka@somainline.org>.
- */
-
-/dts-v1/;
-
-#include "sun50i-h616.dtsi"
-#include "sun50i-h616-cpu-opp.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- aliases {
- ethernet0 = &rtl8189ftv;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-0 {
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
- };
- };
-
- reg_vcc5v: regulator-vcc5v {
- /* board wide 5V supply from carrier boards */
- compatible = "regulator-fixed";
- regulator-name = "vcc-5v";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- reg_vcc33_wifi: vcc33-wifi {
- compatible = "regulator-fixed";
- regulator-name = "vcc33-wifi";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- vin-supply = <®_vcc5v>;
- };
-
- reg_vcc_wifi_io: vcc-wifi-io {
- compatible = "regulator-fixed";
- regulator-name = "vcc-wifi-io";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- vin-supply = <®_vcc33_wifi>;
- };
-
- wifi_pwrseq: wifi-pwrseq {
- compatible = "mmc-pwrseq-simple";
- clocks = <&rtc 1>;
- clock-names = "ext_clock";
- reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
- post-power-on-delay-ms = <200>;
- };
-};
-
-&cpu0 {
- cpu-supply = <®_dcdc2>;
-};
-
-&mmc0 {
- vmmc-supply = <®_dldo1>;
- /* Card detection pin is not connected */
- broken-cd;
- bus-width = <4>;
- status = "okay";
-};
-
-&mmc1 {
- vmmc-supply = <®_vcc33_wifi>;
- vqmmc-supply = <®_vcc_wifi_io>;
- mmc-pwrseq = <&wifi_pwrseq>;
- bus-width = <4>;
- non-removable;
- mmc-ddr-1_8v;
- status = "okay";
-
- rtl8189ftv: wifi@1 {
- reg = <1>;
- };
-};
-
-&r_i2c {
- status = "okay";
-
- axp313a: pmic@36 {
- compatible = "x-powers,axp313a";
- reg = <0x36>;
- interrupt-controller;
- #interrupt-cells = <1>;
-
- regulators {
- reg_dcdc1: dcdc1 {
- regulator-name = "vdd-gpu-sys";
- regulator-min-microvolt = <810000>;
- regulator-max-microvolt = <990000>;
- regulator-always-on;
- };
-
- reg_dcdc2: dcdc2 {
- regulator-name = "vdd-cpu";
- regulator-min-microvolt = <810000>;
- regulator-max-microvolt = <1100000>;
- regulator-ramp-delay = <200>;
- regulator-always-on;
- };
-
- reg_dcdc3: dcdc3 {
- regulator-name = "vcc-dram";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- };
-
- reg_aldo1: aldo1 {
- regulator-name = "vcc-1v8-pll";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- reg_dldo1: dldo1 {
- regulator-name = "vcc-3v3-io";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
- };
- };
-};
-
-&usbphy {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2023 Martin Botka <martin@biqu3d.com>.
- */
-
-/dts-v1/;
-
-#include "sun50i-h616-bigtreetech-cb1.dtsi"
-
-/ {
- model = "BigTreeTech Pi";
- compatible = "bigtreetech,pi", "allwinner,sun50i-h616";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&ehci2 {
- status = "okay";
-};
-
-&ehci3 {
- status = "okay";
-};
-
-&ir {
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&ohci2 {
- status = "okay";
-};
-
-&ohci3 {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_ph_pins>;
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-// Copyright (C) 2023 Martin Botka <martin@somainline.org>
-
-/ {
- cpu_opp_table: opp-table-cpu {
- compatible = "allwinner,sun50i-h616-operating-points";
- nvmem-cells = <&cpu_speed_grade>;
- opp-shared;
-
- opp-480000000 {
- opp-hz = /bits/ 64 <480000000>;
- opp-microvolt = <900000>;
- clock-latency-ns = <244144>; /* 8 32k periods */
- opp-supported-hw = <0x1f>;
- };
-
- opp-600000000 {
- opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <900000>;
- clock-latency-ns = <244144>; /* 8 32k periods */
- opp-supported-hw = <0x12>;
- };
-
- opp-720000000 {
- opp-hz = /bits/ 64 <720000000>;
- opp-microvolt = <900000>;
- clock-latency-ns = <244144>; /* 8 32k periods */
- opp-supported-hw = <0x0d>;
- };
-
- opp-792000000 {
- opp-hz = /bits/ 64 <792000000>;
- opp-microvolt-speed1 = <900000>;
- opp-microvolt-speed4 = <940000>;
- clock-latency-ns = <244144>; /* 8 32k periods */
- opp-supported-hw = <0x12>;
- };
-
- opp-936000000 {
- opp-hz = /bits/ 64 <936000000>;
- opp-microvolt = <900000>;
- clock-latency-ns = <244144>; /* 8 32k periods */
- opp-supported-hw = <0x0d>;
- };
-
- opp-1008000000 {
- opp-hz = /bits/ 64 <1008000000>;
- opp-microvolt-speed0 = <950000>;
- opp-microvolt-speed1 = <940000>;
- opp-microvolt-speed2 = <950000>;
- opp-microvolt-speed3 = <950000>;
- opp-microvolt-speed4 = <1020000>;
- clock-latency-ns = <244144>; /* 8 32k periods */
- opp-supported-hw = <0x1f>;
- };
-
- opp-1104000000 {
- opp-hz = /bits/ 64 <1104000000>;
- opp-microvolt-speed0 = <1000000>;
- opp-microvolt-speed2 = <1000000>;
- opp-microvolt-speed3 = <1000000>;
- clock-latency-ns = <244144>; /* 8 32k periods */
- opp-supported-hw = <0x0d>;
- };
-
- opp-1200000000 {
- opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt-speed0 = <1050000>;
- opp-microvolt-speed1 = <1020000>;
- opp-microvolt-speed2 = <1050000>;
- opp-microvolt-speed3 = <1050000>;
- opp-microvolt-speed4 = <1100000>;
- clock-latency-ns = <244144>; /* 8 32k periods */
- opp-supported-hw = <0x1f>;
- };
-
- opp-1320000000 {
- opp-hz = /bits/ 64 <1320000000>;
- opp-microvolt = <1100000>;
- clock-latency-ns = <244144>; /* 8 32k periods */
- opp-supported-hw = <0x1d>;
- };
-
- opp-1416000000 {
- opp-hz = /bits/ 64 <1416000000>;
- opp-microvolt = <1100000>;
- clock-latency-ns = <244144>; /* 8 32k periods */
- opp-supported-hw = <0x0d>;
- };
-
- opp-1512000000 {
- opp-hz = /bits/ 64 <1512000000>;
- opp-microvolt-speed1 = <1100000>;
- opp-microvolt-speed3 = <1100000>;
- clock-latency-ns = <244144>; /* 8 32k periods */
- opp-supported-hw = <0x0a>;
- };
- };
-};
-
-&cpu0 {
- operating-points-v2 = <&cpu_opp_table>;
-};
-
-&cpu1 {
- operating-points-v2 = <&cpu_opp_table>;
-};
-
-&cpu2 {
- operating-points-v2 = <&cpu_opp_table>;
-};
-
-&cpu3 {
- operating-points-v2 = <&cpu_opp_table>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2020 Arm Ltd.
- *
- * DT nodes common between Orange Pi Zero 2 and Orange Pi Zero 3.
- * Excludes PMIC nodes and properties, since they are different between the two.
- */
-
-#include "sun50i-h616.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- aliases {
- ethernet0 = &emac0;
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-0 {
- function = LED_FUNCTION_POWER;
- color = <LED_COLOR_ID_RED>;
- gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
- default-state = "on";
- };
-
- led-1 {
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
- };
- };
-
- reg_vcc5v: vcc5v {
- /* board wide 5V supply directly from the USB-C socket */
- compatible = "regulator-fixed";
- regulator-name = "vcc-5v";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- reg_usb1_vbus: regulator-usb1-vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb1-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <®_vcc5v>;
- enable-active-high;
- gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */
- };
-};
-
-&ehci1 {
- status = "okay";
-};
-
-/* USB 2 & 3 are on headers only. */
-
-&emac0 {
- pinctrl-names = "default";
- pinctrl-0 = <&ext_rgmii_pins>;
- phy-handle = <&ext_rgmii_phy>;
- status = "okay";
-};
-
-&mdio0 {
- ext_rgmii_phy: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
-};
-
-&mmc0 {
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
- bus-width = <4>;
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <40000000>;
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_ph_pins>;
- status = "okay";
-};
-
-&usbotg {
- /*
- * PHY0 pins are connected to a USB-C socket, but a role switch
- * is not implemented: both CC pins are pulled to GND.
- * The VBUS pins power the device, so a fixed peripheral mode
- * is the best choice.
- * The board can be powered via GPIOs, in this case port0 *can*
- * act as a host (with a cable/adapter ignoring CC), as VBUS is
- * then provided by the GPIOs. Any user of this setup would
- * need to adjust the DT accordingly: dr_mode set to "host",
- * enabling OHCI0 and EHCI0.
- */
- dr_mode = "peripheral";
- status = "okay";
-};
-
-&usbphy {
- usb1_vbus-supply = <®_usb1_vbus>;
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2020 Arm Ltd.
- */
-
-/dts-v1/;
-
-#include "sun50i-h616-orangepi-zero.dtsi"
-#include "sun50i-h616-cpu-opp.dtsi"
-
-/ {
- model = "OrangePi Zero2";
- compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616";
-};
-
-&cpu0 {
- cpu-supply = <®_dcdca>;
-};
-
-&emac0 {
- allwinner,rx-delay-ps = <3100>;
- allwinner,tx-delay-ps = <700>;
- phy-mode = "rgmii";
- phy-supply = <®_dcdce>;
-};
-
-&mmc0 {
- vmmc-supply = <®_dcdce>;
-};
-
-&r_rsb {
- status = "okay";
-
- axp305: pmic@745 {
- compatible = "x-powers,axp305", "x-powers,axp805",
- "x-powers,axp806";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0x745>;
-
- x-powers,self-working-mode;
- vina-supply = <®_vcc5v>;
- vinb-supply = <®_vcc5v>;
- vinc-supply = <®_vcc5v>;
- vind-supply = <®_vcc5v>;
- vine-supply = <®_vcc5v>;
- aldoin-supply = <®_vcc5v>;
- bldoin-supply = <®_vcc5v>;
- cldoin-supply = <®_vcc5v>;
-
- regulators {
- reg_aldo1: aldo1 {
- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-sys";
- };
-
- reg_aldo2: aldo2 { /* 3.3V on headers */
- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc3v3-ext";
- };
-
- reg_aldo3: aldo3 { /* 3.3V on headers */
- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc3v3-ext2";
- };
-
- reg_bldo1: bldo1 {
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc1v8";
- };
-
- bldo2 {
- /* unused */
- };
-
- bldo3 {
- /* unused */
- };
-
- bldo4 {
- /* unused */
- };
-
- cldo1 {
- /* reserved */
- };
-
- cldo2 {
- /* unused */
- };
-
- cldo3 {
- /* unused */
- };
-
- reg_dcdca: dcdca {
- regulator-always-on;
- regulator-min-microvolt = <810000>;
- regulator-max-microvolt = <1100000>;
- regulator-name = "vdd-cpu";
- };
-
- reg_dcdcc: dcdcc {
- regulator-always-on;
- regulator-min-microvolt = <810000>;
- regulator-max-microvolt = <990000>;
- regulator-name = "vdd-gpu-sys";
- };
-
- reg_dcdcd: dcdcd {
- regulator-always-on;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-name = "vdd-dram";
- };
-
- reg_dcdce: dcdce {
- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-eth-mmc";
- };
-
- sw {
- /* unused */
- };
- };
- };
-};
-
-&pio {
- vcc-pc-supply = <®_aldo1>;
- vcc-pf-supply = <®_aldo1>;
- vcc-pg-supply = <®_bldo1>;
- vcc-ph-supply = <®_aldo1>;
- vcc-pi-supply = <®_aldo1>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2021 Arm Ltd.
- */
-
-/dts-v1/;
-
-#include "sun50i-h616.dtsi"
-#include "sun50i-h616-cpu-opp.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
- model = "X96 Mate";
- compatible = "hechuang,x96-mate", "allwinner,sun50i-h616";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- reg_vcc5v: vcc5v {
- /* board wide 5V supply directly from the DC input */
- compatible = "regulator-fixed";
- regulator-name = "vcc-5v";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-};
-
-&cpu0 {
- cpu-supply = <®_dcdca>;
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci2 {
- status = "okay";
-};
-
-&ir {
- status = "okay";
-};
-
-&mmc0 {
- vmmc-supply = <®_dcdce>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
- bus-width = <4>;
- status = "okay";
-};
-
-&mmc2 {
- vmmc-supply = <®_dcdce>;
- vqmmc-supply = <®_bldo1>;
- bus-width = <8>;
- non-removable;
- cap-mmc-hw-reset;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&ohci2 {
- status = "okay";
-};
-
-&r_rsb {
- status = "okay";
-
- axp305: pmic@745 {
- compatible = "x-powers,axp305", "x-powers,axp805",
- "x-powers,axp806";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0x745>;
-
- x-powers,self-working-mode;
- vina-supply = <®_vcc5v>;
- vinb-supply = <®_vcc5v>;
- vinc-supply = <®_vcc5v>;
- vind-supply = <®_vcc5v>;
- vine-supply = <®_vcc5v>;
- aldoin-supply = <®_vcc5v>;
- bldoin-supply = <®_vcc5v>;
- cldoin-supply = <®_vcc5v>;
-
- regulators {
- reg_aldo1: aldo1 {
- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-sys";
- };
-
- /* Enabled by the Android BSP */
- reg_aldo2: aldo2 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc3v3-ext";
- status = "disabled";
- };
-
- /* Enabled by the Android BSP */
- reg_aldo3: aldo3 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc3v3-ext2";
- status = "disabled";
- };
-
- reg_bldo1: bldo1 {
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc1v8";
- };
-
- /* Enabled by the Android BSP */
- reg_bldo2: bldo2 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc1v8-2";
- status = "disabled";
- };
-
- bldo3 {
- /* unused */
- };
-
- bldo4 {
- /* unused */
- };
-
- cldo1 {
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- regulator-name = "vcc2v5";
- };
-
- cldo2 {
- /* unused */
- };
-
- cldo3 {
- /* unused */
- };
-
- reg_dcdca: dcdca {
- regulator-always-on;
- regulator-min-microvolt = <810000>;
- regulator-max-microvolt = <1100000>;
- regulator-name = "vdd-cpu";
- };
-
- reg_dcdcc: dcdcc {
- regulator-always-on;
- regulator-min-microvolt = <810000>;
- regulator-max-microvolt = <990000>;
- regulator-name = "vdd-gpu-sys";
- };
-
- reg_dcdcd: dcdcd {
- regulator-always-on;
- regulator-min-microvolt = <1360000>;
- regulator-max-microvolt = <1360000>;
- regulator-name = "vdd-dram";
- };
-
- reg_dcdce: dcdce {
- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-eth-mmc";
- };
-
- sw {
- /* unused */
- };
- };
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_ph_pins>;
- status = "okay";
-};
-
-&usbotg {
- dr_mode = "host"; /* USB A type receptable */
- status = "okay";
-};
-
-&usbphy {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-// Copyright (C) 2020 Arm Ltd.
-// based on the H6 dtsi, which is:
-// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/sun50i-h616-ccu.h>
-#include <dt-bindings/clock/sun50i-h6-r-ccu.h>
-#include <dt-bindings/clock/sun6i-rtc.h>
-#include <dt-bindings/reset/sun50i-h616-ccu.h>
-#include <dt-bindings/reset/sun50i-h6-r-ccu.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- compatible = "arm,cortex-a53";
- device_type = "cpu";
- reg = <0>;
- enable-method = "psci";
- clocks = <&ccu CLK_CPUX>;
- #cooling-cells = <2>;
- };
-
- cpu1: cpu@1 {
- compatible = "arm,cortex-a53";
- device_type = "cpu";
- reg = <1>;
- enable-method = "psci";
- clocks = <&ccu CLK_CPUX>;
- #cooling-cells = <2>;
- };
-
- cpu2: cpu@2 {
- compatible = "arm,cortex-a53";
- device_type = "cpu";
- reg = <2>;
- enable-method = "psci";
- clocks = <&ccu CLK_CPUX>;
- #cooling-cells = <2>;
- };
-
- cpu3: cpu@3 {
- compatible = "arm,cortex-a53";
- device_type = "cpu";
- reg = <3>;
- enable-method = "psci";
- clocks = <&ccu CLK_CPUX>;
- #cooling-cells = <2>;
- };
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- /*
- * 256 KiB reserved for Trusted Firmware-A (BL31).
- * This is added by BL31 itself, but some bootloaders fail
- * to propagate this into the DTB handed to kernels.
- */
- secmon@40000000 {
- reg = <0x0 0x40000000 0x0 0x40000>;
- no-map;
- };
- };
-
- osc24M: osc24M-clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- clock-output-names = "osc24M";
- };
-
- pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- timer {
- compatible = "arm,armv8-timer";
- arm,no-tick-in-suspend;
- interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 14
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 11
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 10
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- soc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x0 0x40000000>;
-
- syscon: syscon@3000000 {
- compatible = "allwinner,sun50i-h616-system-control";
- reg = <0x03000000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- sram_c: sram@28000 {
- compatible = "mmio-sram";
- reg = <0x00028000 0x30000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x00028000 0x30000>;
- };
- };
-
- ccu: clock@3001000 {
- compatible = "allwinner,sun50i-h616-ccu";
- reg = <0x03001000 0x1000>;
- clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>;
- clock-names = "hosc", "losc", "iosc";
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- dma: dma-controller@3002000 {
- compatible = "allwinner,sun50i-h616-dma",
- "allwinner,sun50i-a100-dma";
- reg = <0x03002000 0x1000>;
- interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
- clock-names = "bus", "mbus";
- dma-channels = <16>;
- dma-requests = <49>;
- resets = <&ccu RST_BUS_DMA>;
- #dma-cells = <1>;
- };
-
- sid: efuse@3006000 {
- compatible = "allwinner,sun50i-h616-sid", "allwinner,sun50i-a64-sid";
- reg = <0x03006000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- ths_calibration: thermal-sensor-calibration@14 {
- reg = <0x14 0x8>;
- };
-
- cpu_speed_grade: cpu-speed-grade@0 {
- reg = <0x0 2>;
- };
- };
-
- watchdog: watchdog@30090a0 {
- compatible = "allwinner,sun50i-h616-wdt",
- "allwinner,sun6i-a31-wdt";
- reg = <0x030090a0 0x20>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&osc24M>;
- };
-
- pio: pinctrl@300b000 {
- compatible = "allwinner,sun50i-h616-pinctrl";
- reg = <0x0300b000 0x400>;
- interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>;
- clock-names = "apb", "hosc", "losc";
- gpio-controller;
- #gpio-cells = <3>;
- interrupt-controller;
- #interrupt-cells = <3>;
-
- ext_rgmii_pins: rgmii-pins {
- pins = "PI0", "PI1", "PI2", "PI3", "PI4",
- "PI5", "PI7", "PI8", "PI9", "PI10",
- "PI11", "PI12", "PI13", "PI14", "PI15",
- "PI16";
- function = "emac0";
- drive-strength = <40>;
- };
-
- i2c0_pins: i2c0-pins {
- pins = "PI5", "PI6";
- function = "i2c0";
- };
-
- i2c3_ph_pins: i2c3-ph-pins {
- pins = "PH4", "PH5";
- function = "i2c3";
- };
-
- ir_rx_pin: ir-rx-pin {
- pins = "PH10";
- function = "ir_rx";
- };
-
- mmc0_pins: mmc0-pins {
- pins = "PF0", "PF1", "PF2", "PF3",
- "PF4", "PF5";
- function = "mmc0";
- drive-strength = <30>;
- bias-pull-up;
- };
-
- /omit-if-no-ref/
- mmc1_pins: mmc1-pins {
- pins = "PG0", "PG1", "PG2", "PG3",
- "PG4", "PG5";
- function = "mmc1";
- drive-strength = <30>;
- bias-pull-up;
- };
-
- mmc2_pins: mmc2-pins {
- pins = "PC0", "PC1", "PC5", "PC6",
- "PC8", "PC9", "PC10", "PC11",
- "PC13", "PC14", "PC15", "PC16";
- function = "mmc2";
- drive-strength = <30>;
- bias-pull-up;
- };
-
- /omit-if-no-ref/
- spi0_pins: spi0-pins {
- pins = "PC0", "PC2", "PC4";
- function = "spi0";
- };
-
- /omit-if-no-ref/
- spi0_cs0_pin: spi0-cs0-pin {
- pins = "PC3";
- function = "spi0";
- };
-
- /omit-if-no-ref/
- spi1_pins: spi1-pins {
- pins = "PH6", "PH7", "PH8";
- function = "spi1";
- };
-
- /omit-if-no-ref/
- spi1_cs0_pin: spi1-cs0-pin {
- pins = "PH5";
- function = "spi1";
- };
-
- spdif_tx_pin: spdif-tx-pin {
- pins = "PH4";
- function = "spdif";
- };
-
- uart0_ph_pins: uart0-ph-pins {
- pins = "PH0", "PH1";
- function = "uart0";
- };
-
- /omit-if-no-ref/
- uart1_pins: uart1-pins {
- pins = "PG6", "PG7";
- function = "uart1";
- };
-
- /omit-if-no-ref/
- uart1_rts_cts_pins: uart1-rts-cts-pins {
- pins = "PG8", "PG9";
- function = "uart1";
- };
-
- /omit-if-no-ref/
- x32clk_fanout_pin: x32clk-fanout-pin {
- pins = "PG10";
- function = "clock";
- };
- };
-
- gic: interrupt-controller@3021000 {
- compatible = "arm,gic-400";
- reg = <0x03021000 0x1000>,
- <0x03022000 0x2000>,
- <0x03024000 0x2000>,
- <0x03026000 0x2000>;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- interrupt-controller;
- #interrupt-cells = <3>;
- };
-
- mmc0: mmc@4020000 {
- compatible = "allwinner,sun50i-h616-mmc",
- "allwinner,sun50i-a100-mmc";
- reg = <0x04020000 0x1000>;
- clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
- clock-names = "ahb", "mmc";
- resets = <&ccu RST_BUS_MMC0>;
- reset-names = "ahb";
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>;
- status = "disabled";
- max-frequency = <150000000>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- mmc-ddr-3_3v;
- cap-sdio-irq;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- mmc1: mmc@4021000 {
- compatible = "allwinner,sun50i-h616-mmc",
- "allwinner,sun50i-a100-mmc";
- reg = <0x04021000 0x1000>;
- clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
- clock-names = "ahb", "mmc";
- resets = <&ccu RST_BUS_MMC1>;
- reset-names = "ahb";
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins>;
- status = "disabled";
- max-frequency = <150000000>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- mmc-ddr-3_3v;
- cap-sdio-irq;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- mmc2: mmc@4022000 {
- compatible = "allwinner,sun50i-h616-emmc",
- "allwinner,sun50i-a100-emmc";
- reg = <0x04022000 0x1000>;
- clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
- clock-names = "ahb", "mmc";
- resets = <&ccu RST_BUS_MMC2>;
- reset-names = "ahb";
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins>;
- status = "disabled";
- max-frequency = <150000000>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- mmc-ddr-3_3v;
- cap-sdio-irq;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- uart0: serial@5000000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x05000000 0x400>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_BUS_UART0>;
- dmas = <&dma 14>, <&dma 14>;
- dma-names = "tx", "rx";
- resets = <&ccu RST_BUS_UART0>;
- status = "disabled";
- };
-
- uart1: serial@5000400 {
- compatible = "snps,dw-apb-uart";
- reg = <0x05000400 0x400>;
- interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_BUS_UART1>;
- dmas = <&dma 15>, <&dma 15>;
- dma-names = "tx", "rx";
- resets = <&ccu RST_BUS_UART1>;
- status = "disabled";
- };
-
- uart2: serial@5000800 {
- compatible = "snps,dw-apb-uart";
- reg = <0x05000800 0x400>;
- interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_BUS_UART2>;
- dmas = <&dma 16>, <&dma 16>;
- dma-names = "tx", "rx";
- resets = <&ccu RST_BUS_UART2>;
- status = "disabled";
- };
-
- uart3: serial@5000c00 {
- compatible = "snps,dw-apb-uart";
- reg = <0x05000c00 0x400>;
- interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_BUS_UART3>;
- dmas = <&dma 17>, <&dma 17>;
- dma-names = "tx", "rx";
- resets = <&ccu RST_BUS_UART3>;
- status = "disabled";
- };
-
- uart4: serial@5001000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x05001000 0x400>;
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_BUS_UART4>;
- dmas = <&dma 18>, <&dma 18>;
- dma-names = "tx", "rx";
- resets = <&ccu RST_BUS_UART4>;
- status = "disabled";
- };
-
- uart5: serial@5001400 {
- compatible = "snps,dw-apb-uart";
- reg = <0x05001400 0x400>;
- interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_BUS_UART5>;
- dmas = <&dma 19>, <&dma 19>;
- dma-names = "tx", "rx";
- resets = <&ccu RST_BUS_UART5>;
- status = "disabled";
- };
-
- i2c0: i2c@5002000 {
- compatible = "allwinner,sun50i-h616-i2c",
- "allwinner,sun8i-v536-i2c",
- "allwinner,sun6i-a31-i2c";
- reg = <0x05002000 0x400>;
- interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_I2C0>;
- dmas = <&dma 43>, <&dma 43>;
- dma-names = "rx", "tx";
- resets = <&ccu RST_BUS_I2C0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- i2c1: i2c@5002400 {
- compatible = "allwinner,sun50i-h616-i2c",
- "allwinner,sun8i-v536-i2c",
- "allwinner,sun6i-a31-i2c";
- reg = <0x05002400 0x400>;
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_I2C1>;
- dmas = <&dma 44>, <&dma 44>;
- dma-names = "rx", "tx";
- resets = <&ccu RST_BUS_I2C1>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- i2c2: i2c@5002800 {
- compatible = "allwinner,sun50i-h616-i2c",
- "allwinner,sun8i-v536-i2c",
- "allwinner,sun6i-a31-i2c";
- reg = <0x05002800 0x400>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_I2C2>;
- dmas = <&dma 45>, <&dma 45>;
- dma-names = "rx", "tx";
- resets = <&ccu RST_BUS_I2C2>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- i2c3: i2c@5002c00 {
- compatible = "allwinner,sun50i-h616-i2c",
- "allwinner,sun8i-v536-i2c",
- "allwinner,sun6i-a31-i2c";
- reg = <0x05002c00 0x400>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_I2C3>;
- dmas = <&dma 46>, <&dma 46>;
- dma-names = "rx", "tx";
- resets = <&ccu RST_BUS_I2C3>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- i2c4: i2c@5003000 {
- compatible = "allwinner,sun50i-h616-i2c",
- "allwinner,sun8i-v536-i2c",
- "allwinner,sun6i-a31-i2c";
- reg = <0x05003000 0x400>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_I2C4>;
- dmas = <&dma 47>, <&dma 47>;
- dma-names = "rx", "tx";
- resets = <&ccu RST_BUS_I2C4>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi0: spi@5010000 {
- compatible = "allwinner,sun50i-h616-spi",
- "allwinner,sun8i-h3-spi";
- reg = <0x05010000 0x1000>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
- clock-names = "ahb", "mod";
- dmas = <&dma 22>, <&dma 22>;
- dma-names = "rx", "tx";
- resets = <&ccu RST_BUS_SPI0>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi1: spi@5011000 {
- compatible = "allwinner,sun50i-h616-spi",
- "allwinner,sun8i-h3-spi";
- reg = <0x05011000 0x1000>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
- clock-names = "ahb", "mod";
- dmas = <&dma 23>, <&dma 23>;
- dma-names = "rx", "tx";
- resets = <&ccu RST_BUS_SPI1>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- emac0: ethernet@5020000 {
- compatible = "allwinner,sun50i-h616-emac0",
- "allwinner,sun50i-a64-emac";
- reg = <0x05020000 0x10000>;
- interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
- clocks = <&ccu CLK_BUS_EMAC0>;
- clock-names = "stmmaceth";
- resets = <&ccu RST_BUS_EMAC0>;
- reset-names = "stmmaceth";
- syscon = <&syscon>;
- status = "disabled";
-
- mdio0: mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
- spdif: spdif@5093000 {
- compatible = "allwinner,sun50i-h616-spdif";
- reg = <0x05093000 0x400>;
- interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
- clock-names = "apb", "spdif";
- resets = <&ccu RST_BUS_SPDIF>;
- dmas = <&dma 2>;
- dma-names = "tx";
- pinctrl-names = "default";
- pinctrl-0 = <&spdif_tx_pin>;
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- ths: thermal-sensor@5070400 {
- compatible = "allwinner,sun50i-h616-ths";
- reg = <0x05070400 0x400>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_THS>;
- clock-names = "bus";
- resets = <&ccu RST_BUS_THS>;
- nvmem-cells = <&ths_calibration>;
- nvmem-cell-names = "calibration";
- allwinner,sram = <&syscon>;
- #thermal-sensor-cells = <1>;
- };
-
- usbotg: usb@5100000 {
- compatible = "allwinner,sun50i-h616-musb",
- "allwinner,sun8i-h3-musb";
- reg = <0x05100000 0x0400>;
- clocks = <&ccu CLK_BUS_OTG>;
- resets = <&ccu RST_BUS_OTG>;
- interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "mc";
- phys = <&usbphy 0>;
- phy-names = "usb";
- extcon = <&usbphy 0>;
- status = "disabled";
- };
-
- usbphy: phy@5100400 {
- compatible = "allwinner,sun50i-h616-usb-phy";
- reg = <0x05100400 0x24>,
- <0x05101800 0x14>,
- <0x05200800 0x14>,
- <0x05310800 0x14>,
- <0x05311800 0x14>;
- reg-names = "phy_ctrl",
- "pmu0",
- "pmu1",
- "pmu2",
- "pmu3";
- clocks = <&ccu CLK_USB_PHY0>,
- <&ccu CLK_USB_PHY1>,
- <&ccu CLK_USB_PHY2>,
- <&ccu CLK_USB_PHY3>,
- <&ccu CLK_BUS_EHCI2>;
- clock-names = "usb0_phy",
- "usb1_phy",
- "usb2_phy",
- "usb3_phy",
- "pmu2_clk";
- resets = <&ccu RST_USB_PHY0>,
- <&ccu RST_USB_PHY1>,
- <&ccu RST_USB_PHY2>,
- <&ccu RST_USB_PHY3>;
- reset-names = "usb0_reset",
- "usb1_reset",
- "usb2_reset",
- "usb3_reset";
- status = "disabled";
- #phy-cells = <1>;
- };
-
- ehci0: usb@5101000 {
- compatible = "allwinner,sun50i-h616-ehci",
- "generic-ehci";
- reg = <0x05101000 0x100>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_OHCI0>,
- <&ccu CLK_BUS_EHCI0>,
- <&ccu CLK_USB_OHCI0>;
- resets = <&ccu RST_BUS_OHCI0>,
- <&ccu RST_BUS_EHCI0>;
- phys = <&usbphy 0>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ohci0: usb@5101400 {
- compatible = "allwinner,sun50i-h616-ohci",
- "generic-ohci";
- reg = <0x05101400 0x100>;
- interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_OHCI0>,
- <&ccu CLK_USB_OHCI0>;
- resets = <&ccu RST_BUS_OHCI0>;
- phys = <&usbphy 0>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ehci1: usb@5200000 {
- compatible = "allwinner,sun50i-h616-ehci",
- "generic-ehci";
- reg = <0x05200000 0x100>;
- interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_OHCI1>,
- <&ccu CLK_BUS_EHCI1>,
- <&ccu CLK_USB_OHCI1>;
- resets = <&ccu RST_BUS_OHCI1>,
- <&ccu RST_BUS_EHCI1>;
- phys = <&usbphy 1>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ohci1: usb@5200400 {
- compatible = "allwinner,sun50i-h616-ohci",
- "generic-ohci";
- reg = <0x05200400 0x100>;
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_OHCI1>,
- <&ccu CLK_USB_OHCI1>;
- resets = <&ccu RST_BUS_OHCI1>;
- phys = <&usbphy 1>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ehci2: usb@5310000 {
- compatible = "allwinner,sun50i-h616-ehci",
- "generic-ehci";
- reg = <0x05310000 0x100>;
- interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_OHCI2>,
- <&ccu CLK_BUS_EHCI2>,
- <&ccu CLK_USB_OHCI2>;
- resets = <&ccu RST_BUS_OHCI2>,
- <&ccu RST_BUS_EHCI2>;
- phys = <&usbphy 2>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ohci2: usb@5310400 {
- compatible = "allwinner,sun50i-h616-ohci",
- "generic-ohci";
- reg = <0x05310400 0x100>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_OHCI2>,
- <&ccu CLK_USB_OHCI2>;
- resets = <&ccu RST_BUS_OHCI2>;
- phys = <&usbphy 2>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ehci3: usb@5311000 {
- compatible = "allwinner,sun50i-h616-ehci",
- "generic-ehci";
- reg = <0x05311000 0x100>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_OHCI3>,
- <&ccu CLK_BUS_EHCI3>,
- <&ccu CLK_USB_OHCI3>;
- resets = <&ccu RST_BUS_OHCI3>,
- <&ccu RST_BUS_EHCI3>;
- phys = <&usbphy 3>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ohci3: usb@5311400 {
- compatible = "allwinner,sun50i-h616-ohci",
- "generic-ohci";
- reg = <0x05311400 0x100>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_OHCI3>,
- <&ccu CLK_USB_OHCI3>;
- resets = <&ccu RST_BUS_OHCI3>;
- phys = <&usbphy 3>;
- phy-names = "usb";
- status = "disabled";
- };
-
- rtc: rtc@7000000 {
- compatible = "allwinner,sun50i-h616-rtc";
- reg = <0x07000000 0x400>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&r_ccu CLK_R_APB1_RTC>, <&osc24M>,
- <&ccu CLK_PLL_SYSTEM_32K>;
- clock-names = "bus", "hosc",
- "pll-32k";
- #clock-cells = <1>;
- };
-
- r_ccu: clock@7010000 {
- compatible = "allwinner,sun50i-h616-r-ccu";
- reg = <0x07010000 0x210>;
- clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
- <&ccu CLK_PLL_PERIPH0>;
- clock-names = "hosc", "losc", "iosc", "pll-periph";
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- nmi_intc: interrupt-controller@7010320 {
- compatible = "allwinner,sun50i-h616-nmi",
- "allwinner,sun9i-a80-nmi";
- reg = <0x07010320 0xc>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- r_pio: pinctrl@7022000 {
- compatible = "allwinner,sun50i-h616-r-pinctrl";
- reg = <0x07022000 0x400>;
- clocks = <&r_ccu CLK_R_APB1>, <&osc24M>,
- <&rtc CLK_OSC32K>;
- clock-names = "apb", "hosc", "losc";
- gpio-controller;
- #gpio-cells = <3>;
-
- /omit-if-no-ref/
- r_i2c_pins: r-i2c-pins {
- pins = "PL0", "PL1";
- function = "s_i2c";
- };
-
- r_rsb_pins: r-rsb-pins {
- pins = "PL0", "PL1";
- function = "s_rsb";
- };
- };
-
- ir: ir@7040000 {
- compatible = "allwinner,sun50i-h616-ir",
- "allwinner,sun6i-a31-ir";
- reg = <0x07040000 0x400>;
- interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&r_ccu CLK_R_APB1_IR>,
- <&r_ccu CLK_IR>;
- clock-names = "apb", "ir";
- resets = <&r_ccu RST_R_APB1_IR>;
- pinctrl-names = "default";
- pinctrl-0 = <&ir_rx_pin>;
- status = "disabled";
- };
-
- r_i2c: i2c@7081400 {
- compatible = "allwinner,sun50i-h616-i2c",
- "allwinner,sun8i-v536-i2c",
- "allwinner,sun6i-a31-i2c";
- reg = <0x07081400 0x400>;
- interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&r_ccu CLK_R_APB2_I2C>;
- dmas = <&dma 48>, <&dma 48>;
- dma-names = "rx", "tx";
- resets = <&r_ccu RST_R_APB2_I2C>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- r_rsb: rsb@7083000 {
- compatible = "allwinner,sun50i-h616-rsb",
- "allwinner,sun8i-a23-rsb";
- reg = <0x07083000 0x400>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&r_ccu CLK_R_APB2_RSB>;
- clock-frequency = <3000000>;
- resets = <&r_ccu RST_R_APB2_RSB>;
- pinctrl-names = "default";
- pinctrl-0 = <&r_rsb_pins>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
- thermal-zones {
- cpu-thermal {
- polling-delay-passive = <500>;
- polling-delay = <1000>;
- thermal-sensors = <&ths 2>;
- sustainable-power = <1000>;
-
- trips {
- cpu_threshold: cpu-trip-0 {
- temperature = <60000>;
- type = "passive";
- hysteresis = <0>;
- };
- cpu_target: cpu-trip-1 {
- temperature = <70000>;
- type = "passive";
- hysteresis = <0>;
- };
- cpu_critical: cpu-trip-2 {
- temperature = <110000>;
- type = "critical";
- hysteresis = <0>;
- };
- };
- };
-
- gpu-thermal {
- polling-delay-passive = <500>;
- polling-delay = <1000>;
- thermal-sensors = <&ths 0>;
- sustainable-power = <1100>;
-
- trips {
- gpu_temp_critical: gpu-trip-0 {
- temperature = <110000>;
- type = "critical";
- hysteresis = <0>;
- };
- };
- };
-
- ve-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&ths 1>;
-
- trips {
- ve_temp_critical: ve-trip-0 {
- temperature = <110000>;
- type = "critical";
- hysteresis = <0>;
- };
- };
- };
-
- ddr-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&ths 3>;
-
- trips {
- ddr_temp_critical: ddr-trip-0 {
- temperature = <110000>;
- type = "critical";
- hysteresis = <0>;
- };
- };
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) Jisheng Zhang <jszhang@kernel.org>
- */
-
-#include "sun50i-h616.dtsi"
-#include "sun50i-h616-cpu-opp.dtsi"
-
-&cpu0 {
- cpu-supply = <®_dcdc2>;
-};
-
-&mmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins>;
- vmmc-supply = <®_dldo1>;
- vqmmc-supply = <®_aldo1>;
- bus-width = <8>;
- non-removable;
- cap-mmc-hw-reset;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- status = "okay";
-};
-
-&r_i2c {
- status = "okay";
-
- axp313: pmic@36 {
- compatible = "x-powers,axp313a";
- reg = <0x36>;
- #interrupt-cells = <1>;
- interrupt-controller;
-
- regulators {
- reg_aldo1: aldo1 {
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc-1v8-pll";
- };
-
- reg_dldo1: dldo1 {
- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-3v3-io";
- };
-
- reg_dcdc1: dcdc1 {
- regulator-always-on;
- regulator-min-microvolt = <810000>;
- regulator-max-microvolt = <990000>;
- regulator-name = "vdd-gpu-sys";
- };
-
- reg_dcdc2: dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <810000>;
- regulator-max-microvolt = <1100000>;
- regulator-name = "vdd-cpu";
- };
-
- reg_dcdc3: dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-name = "vdd-dram";
- };
- };
- };
-};
-
-&pio {
- vcc-pc-supply = <®_dldo1>;
- vcc-pf-supply = <®_dldo1>;
- vcc-pg-supply = <®_aldo1>;
- vcc-ph-supply = <®_dldo1>;
- vcc-pi-supply = <®_dldo1>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) Jisheng Zhang <jszhang@kernel.org>
- */
-
-/dts-v1/;
-
-#include "sun50i-h618-longan-module-3h.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- model = "Sipeed Longan Pi 3H";
- compatible = "sipeed,longan-pi-3h", "sipeed,longan-module-3h", "allwinner,sun50i-h618";
-
- aliases {
- ethernet0 = &emac0;
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-0 {
- color = <LED_COLOR_ID_ORANGE>;
- function = LED_FUNCTION_INDICATOR;
- function-enumerator = <0>;
- gpios = <&pio 6 2 GPIO_ACTIVE_LOW>; /* PG2 */
- };
-
- led-1 {
- color = <LED_COLOR_ID_ORANGE>;
- function = LED_FUNCTION_INDICATOR;
- function-enumerator = <1>;
- gpios = <&pio 6 4 GPIO_ACTIVE_LOW>; /* PG4 */
- };
- };
-
- reg_vcc5v: regulator-vcc5v {
- /* board wide 5V supply directly from the USB-C socket */
- compatible = "regulator-fixed";
- regulator-name = "vcc-5v";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- reg_vcc3v3: regulator-vcc3v3 {
- compatible = "regulator-fixed";
- regulator-name = "vcc-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- vin-supply = <®_vcc5v>;
- };
-};
-
-&axp313 {
- vin1-supply = <®_vcc5v>;
- vin2-supply = <®_vcc5v>;
- vin3-supply = <®_vcc5v>;
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&ehci2 {
- status = "okay";
-};
-
-&ohci2 {
- status = "okay";
-};
-
-/* WiFi & BT combo module is connected to this Host */
-&ehci3 {
- status = "okay";
-};
-
-&ohci3 {
- status = "okay";
-};
-
-&emac0 {
- pinctrl-names = "default";
- pinctrl-0 = <&ext_rgmii_pins>;
- phy-mode = "rgmii";
- phy-handle = <&ext_rgmii_phy>;
- allwinner,rx-delay-ps = <3100>;
- allwinner,tx-delay-ps = <700>;
- phy-supply = <®_vcc3v3>;
- status = "okay";
-};
-
-&mdio0 {
- ext_rgmii_phy: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
-};
-
-&mmc0 {
- bus-width = <4>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
- vmmc-supply = <®_vcc3v3>;
- status = "okay";
-};
-
-&uart0 {
- status = "okay";
-};
-
-&usbotg {
- /*
- * PHY0 pins are connected to a USB-C socket, but a role switch
- * is not implemented: both CC pins are pulled to GND.
- * The VBUS pins power the device, so a fixed peripheral mode
- * is the best choice.
- * The board can be powered via GPIOs, in this case port0 *can*
- * act as a host (with a cable/adapter ignoring CC), as VBUS is
- * then provided by the GPIOs. Any user of this setup would
- * need to adjust the DT accordingly: dr_mode set to "host",
- * enabling OHCI0 and EHCI0.
- */
- dr_mode = "peripheral";
- status = "okay";
-};
-
-&usbphy {
- usb1_vbus-supply = <®_vcc5v>;
- usb2_vbus-supply = <®_vcc5v>;
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2023 Arm Ltd.
- */
-
-/dts-v1/;
-
-#include "sun50i-h616.dtsi"
-#include "sun50i-h616-cpu-opp.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- model = "OrangePi Zero 2W";
- compatible = "xunlong,orangepi-zero2w", "allwinner,sun50i-h618";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-0 {
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
- };
- };
-
- reg_vcc5v: vcc5v {
- /* board wide 5V supply directly from the USB-C socket */
- compatible = "regulator-fixed";
- regulator-name = "vcc-5v";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- reg_vcc3v3: vcc3v3 {
- /* SY8089 DC/DC converter */
- compatible = "regulator-fixed";
- regulator-name = "vcc-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <®_vcc5v>;
- regulator-always-on;
- };
-};
-
-&cpu0 {
- cpu-supply = <®_dcdc2>;
-};
-
-&ehci1 {
- status = "okay";
-};
-
-/* USB 2 & 3 are on the FPC connector (or the exansion board) */
-
-&mmc0 {
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
- bus-width = <4>;
- vmmc-supply = <®_vcc3v3>;
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&pio {
- vcc-pc-supply = <®_dldo1>;
- vcc-pf-supply = <®_dldo1>; /* internally via VCC-IO */
- vcc-pg-supply = <®_aldo1>;
- vcc-ph-supply = <®_dldo1>; /* internally via VCC-IO */
- vcc-pi-supply = <®_dldo1>;
-};
-
-&r_i2c {
- status = "okay";
-
- axp313: pmic@36 {
- compatible = "x-powers,axp313a";
- reg = <0x36>;
- #interrupt-cells = <1>;
- interrupt-controller;
- interrupt-parent = <&pio>;
- interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>; /* PC9 */
-
- vin1-supply = <®_vcc5v>;
- vin2-supply = <®_vcc5v>;
- vin3-supply = <®_vcc5v>;
-
- regulators {
- /* Supplies VCC-PLL and DRAM */
- reg_aldo1: aldo1 {
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc1v8";
- };
-
- /* Supplies VCC-IO, so needs to be always on. */
- reg_dldo1: dldo1 {
- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc3v3";
- };
-
- reg_dcdc1: dcdc1 {
- regulator-always-on;
- regulator-min-microvolt = <810000>;
- regulator-max-microvolt = <990000>;
- regulator-name = "vdd-gpu-sys";
- };
-
- reg_dcdc2: dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <810000>;
- regulator-max-microvolt = <1100000>;
- regulator-name = "vdd-cpu";
- };
-
- reg_dcdc3: dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-name = "vdd-dram";
- };
- };
- };
-};
-
-&spi0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <40000000>;
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_ph_pins>;
- status = "okay";
-};
-
-&usbotg {
- /*
- * PHY0 pins are connected to a USB-C socket, but a role switch
- * is not implemented: both CC pins are pulled to GND.
- * The VBUS pins power the device, so a fixed peripheral mode
- * is the best choice.
- * The board can be powered via GPIOs, in this case port0 *can*
- * act as a host (with a cable/adapter ignoring CC), as VBUS is
- * then provided by the GPIOs. Any user of this setup would
- * need to adjust the DT accordingly: dr_mode set to "host",
- * enabling OHCI0 and EHCI0.
- */
- dr_mode = "peripheral";
- status = "okay";
-};
-
-&usbphy {
- usb1_vbus-supply = <®_vcc5v>;
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2023 Arm Ltd.
- */
-
-/dts-v1/;
-
-#include "sun50i-h616-orangepi-zero.dtsi"
-#include "sun50i-h616-cpu-opp.dtsi"
-
-/ {
- model = "OrangePi Zero3";
- compatible = "xunlong,orangepi-zero3", "allwinner,sun50i-h618";
-};
-
-&cpu0 {
- cpu-supply = <®_dcdc2>;
-};
-
-&emac0 {
- allwinner,tx-delay-ps = <700>;
- phy-mode = "rgmii-rxid";
- phy-supply = <®_dldo1>;
-};
-
-&ext_rgmii_phy {
- motorcomm,clk-out-frequency-hz = <125000000>;
-};
-
-&mmc0 {
- /*
- * The schematic shows the card detect pin wired up to PF6, via an
- * inverter, but it just doesn't work.
- */
- broken-cd;
- vmmc-supply = <®_dldo1>;
-};
-
-&r_i2c {
- status = "okay";
-
- axp313: pmic@36 {
- compatible = "x-powers,axp313a";
- reg = <0x36>;
- #interrupt-cells = <1>;
- interrupt-controller;
- interrupt-parent = <&pio>;
- interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>; /* PC9 */
-
- vin1-supply = <®_vcc5v>;
- vin2-supply = <®_vcc5v>;
- vin3-supply = <®_vcc5v>;
-
- regulators {
- /* Supplies VCC-PLL, so needs to be always on. */
- reg_aldo1: aldo1 {
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc1v8";
- };
-
- /* Supplies VCC-IO, so needs to be always on. */
- reg_dldo1: dldo1 {
- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc3v3";
- };
-
- reg_dcdc1: dcdc1 {
- regulator-always-on;
- regulator-min-microvolt = <810000>;
- regulator-max-microvolt = <990000>;
- regulator-name = "vdd-gpu-sys";
- };
-
- reg_dcdc2: dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <810000>;
- regulator-max-microvolt = <1100000>;
- regulator-name = "vdd-cpu";
- };
-
- reg_dcdc3: dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-name = "vdd-dram";
- };
- };
- };
-};
-
-&pio {
- vcc-pc-supply = <®_dldo1>;
- vcc-pf-supply = <®_dldo1>;
- vcc-pg-supply = <®_aldo1>;
- vcc-ph-supply = <®_dldo1>;
- vcc-pi-supply = <®_dldo1>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2023 Arm Ltd.
- */
-
-/dts-v1/;
-
-#include "sun50i-h616.dtsi"
-#include "sun50i-h616-cpu-opp.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
- model = "Transpeed 8K618-T";
- compatible = "transpeed,8k618-t", "allwinner,sun50i-h618";
-
- aliases {
- ethernet1 = &sdio_wifi;
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- reg_vcc5v: vcc5v {
- /* board wide 5V supply directly from the DC input */
- compatible = "regulator-fixed";
- regulator-name = "vcc-5v";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- reg_vcc3v3: vcc3v3 {
- /* discrete 3.3V regulator */
- compatible = "regulator-fixed";
- regulator-name = "vcc-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- wifi_pwrseq: pwrseq {
- compatible = "mmc-pwrseq-simple";
- clocks = <&rtc CLK_OSC32K_FANOUT>;
- clock-names = "ext_clock";
- pinctrl-0 = <&x32clk_fanout_pin>;
- pinctrl-names = "default";
- reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
- };
-};
-
-&cpu0 {
- cpu-supply = <®_dcdc2>;
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&ir {
- status = "okay";
-};
-
-&mmc0 {
- vmmc-supply = <®_dldo1>;
- cd-gpios = <&pio 8 16 GPIO_ACTIVE_LOW>; /* PI16 */
- bus-width = <4>;
- status = "okay";
-};
-
-&mmc1 {
- vmmc-supply = <®_dldo1>;
- vqmmc-supply = <®_aldo1>;
- mmc-pwrseq = <&wifi_pwrseq>;
- bus-width = <4>;
- non-removable;
- status = "okay";
-
- sdio_wifi: wifi@1 {
- reg = <1>;
- };
-};
-
-&mmc2 {
- vmmc-supply = <®_dldo1>;
- vqmmc-supply = <®_aldo1>;
- bus-width = <8>;
- non-removable;
- cap-mmc-hw-reset;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&r_i2c {
- status = "okay";
-
- axp313: pmic@36 {
- compatible = "x-powers,axp313a";
- reg = <0x36>;
- #interrupt-cells = <1>;
- interrupt-controller;
-
- vin1-supply = <®_vcc5v>;
- vin2-supply = <®_vcc5v>;
- vin3-supply = <®_vcc5v>;
-
- regulators {
- reg_aldo1: aldo1 {
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc-1v8-pll";
- };
-
- reg_dldo1: dldo1 {
- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-3v3-io-mmc";
- };
-
- reg_dcdc1: dcdc1 {
- regulator-always-on;
- regulator-min-microvolt = <810000>;
- regulator-max-microvolt = <990000>;
- regulator-name = "vdd-gpu-sys";
- };
-
- reg_dcdc2: dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <810000>;
- regulator-max-microvolt = <1100000>;
- regulator-name = "vdd-cpu";
- };
-
- reg_dcdc3: dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <1360000>;
- regulator-max-microvolt = <1360000>;
- regulator-name = "vdd-dram";
- };
- };
- };
-};
-
-&pio {
- vcc-pc-supply = <®_aldo1>;
- vcc-pg-supply = <®_dldo1>;
- vcc-ph-supply = <®_dldo1>;
- vcc-pi-supply = <®_dldo1>;
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_ph_pins>;
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
- uart-has-rtscts;
- status = "okay";
-};
-
-&usbotg {
- dr_mode = "host"; /* USB A type receptable */
- status = "okay";
-};
-
-&usbphy {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-/*
- * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>.
- */
-
-/dts-v1/;
-
-#include "sun50i-h616.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- model = "Anbernic RG35XX 2024";
- chassis-type = "handset";
- compatible = "anbernic,rg35xx-2024", "allwinner,sun50i-h700";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- gpio_keys_gamepad: gpio-keys-gamepad {
- compatible = "gpio-keys";
-
- button-a {
- label = "Action-Pad A";
- gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
- linux,input-type = <EV_KEY>;
- linux,code = <BTN_EAST>;
- };
-
- button-b {
- label = "Action-Pad B";
- gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
- linux,input-type = <EV_KEY>;
- linux,code = <BTN_SOUTH>;
- };
-
- button-down {
- label = "D-Pad Down";
- gpios = <&pio 4 0 GPIO_ACTIVE_LOW>; /* PE0 */
- linux,input-type = <EV_KEY>;
- linux,code = <BTN_DPAD_DOWN>;
- };
-
- button-l1 {
- label = "Key L1";
- gpios = <&pio 0 10 GPIO_ACTIVE_LOW>; /* PA10 */
- linux,input-type = <EV_KEY>;
- linux,code = <BTN_TL>;
- };
-
- button-l2 {
- label = "Key L2";
- gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
- linux,input-type = <EV_KEY>;
- linux,code = <BTN_TL2>;
- };
-
- button-left {
- label = "D-Pad left";
- gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
- linux,input-type = <EV_KEY>;
- linux,code = <BTN_DPAD_LEFT>;
- };
-
- button-menu {
- label = "Key Menu";
- gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; /* PE3 */
- linux,input-type = <EV_KEY>;
- linux,code = <BTN_MODE>;
- };
-
- button-r1 {
- label = "Key R1";
- gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
- linux,input-type = <EV_KEY>;
- linux,code = <BTN_TR>;
- };
-
- button-r2 {
- label = "Key R2";
- gpios = <&pio 0 7 GPIO_ACTIVE_LOW>; /* PA7 */
- linux,input-type = <EV_KEY>;
- linux,code = <BTN_TR2>;
- };
-
- button-right {
- label = "D-Pad Right";
- gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
- linux,input-type = <EV_KEY>;
- linux,code = <BTN_DPAD_RIGHT>;
- };
-
- button-select {
- label = "Key Select";
- gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
- linux,input-type = <EV_KEY>;
- linux,code = <BTN_SELECT>;
- };
- button-start {
- label = "Key Start";
- gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
- linux,input-type = <EV_KEY>;
- linux,code = <BTN_START>;
- };
-
- button-up {
- label = "D-Pad Up";
- gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
- linux,input-type = <EV_KEY>;
- linux,code = <BTN_DPAD_UP>;
- };
-
- button-x {
- label = "Action-Pad X";
- gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
- linux,input-type = <EV_KEY>;
- linux,code = <BTN_NORTH>;
- };
-
- button-y {
- label = "Action Pad Y";
- gpios = <&pio 0 2 GPIO_ACTIVE_LOW>; /* PA2 */
- linux,input-type = <EV_KEY>;
- linux,code = <BTN_WEST>;
- };
- };
-
- gpio-keys-volume {
- compatible = "gpio-keys";
- autorepeat;
-
- button-vol-up {
- label = "Key Volume Up";
- gpios = <&pio 4 1 GPIO_ACTIVE_LOW>; /* PE1 */
- linux,input-type = <EV_KEY>;
- linux,code = <KEY_VOLUMEUP>;
- };
-
- button-vol-down {
- label = "Key Volume Down";
- gpios = <&pio 4 2 GPIO_ACTIVE_LOW>; /* PE2 */
- linux,input-type = <EV_KEY>;
- linux,code = <KEY_VOLUMEDOWN>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-0 {
- function = LED_FUNCTION_POWER;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&pio 8 12 GPIO_ACTIVE_HIGH>; /* PI12 */
- default-state = "on";
- };
- };
-
- reg_vcc5v: regulator-vcc5v { /* USB-C power input */
- compatible = "regulator-fixed";
- regulator-name = "vcc-5v";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-};
-
-&cpu0 {
- cpu-supply = <®_dcdc1>;
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&mmc0 {
- vmmc-supply = <®_cldo3>;
- disable-wp;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
- bus-width = <4>;
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&pio {
- vcc-pa-supply = <®_cldo3>;
- vcc-pc-supply = <®_cldo3>;
- vcc-pe-supply = <®_cldo3>;
- vcc-pf-supply = <®_cldo3>;
- vcc-pg-supply = <®_aldo4>;
- vcc-ph-supply = <®_cldo3>;
- vcc-pi-supply = <®_cldo3>;
-};
-
-&r_rsb {
- status = "okay";
-
- axp717: pmic@3a3 {
- compatible = "x-powers,axp717";
- reg = <0x3a3>;
- interrupt-controller;
- #interrupt-cells = <1>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
- vin1-supply = <®_vcc5v>;
- vin2-supply = <®_vcc5v>;
- vin3-supply = <®_vcc5v>;
- vin4-supply = <®_vcc5v>;
-
- regulators {
- reg_dcdc1: dcdc1 {
- regulator-always-on;
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1100000>;
- regulator-name = "vdd-cpu";
- };
-
- reg_dcdc2: dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <940000>;
- regulator-max-microvolt = <940000>;
- regulator-name = "vdd-gpu-sys";
- };
-
- reg_dcdc3: dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-name = "vdd-dram";
- };
-
- reg_aldo1: aldo1 {
- /* 1.8v - unused */
- };
-
- reg_aldo2: aldo2 {
- /* 1.8v - unused */
- };
-
- reg_aldo3: aldo3 {
- /* 1.8v - unused */
- };
-
- reg_aldo4: aldo4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc-pg";
- };
-
- reg_bldo1: bldo1 {
- /* 1.8v - unused */
- };
-
- reg_bldo2: bldo2 {
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc-pll";
- };
-
- reg_bldo3: bldo3 {
- /* 2.8v - unused */
- };
-
- reg_bldo4: bldo4 {
- /* 1.2v - unused */
- };
-
- reg_cldo1: cldo1 {
- /* 3.3v - audio codec - not yet implemented */
- };
-
- reg_cldo2: cldo2 {
- /* 3.3v - unused */
- };
-
- reg_cldo3: cldo3 {
- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-io";
- };
-
- reg_cldo4: cldo4 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-wifi";
- };
-
- reg_boost: boost {
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5200000>;
- regulator-name = "boost";
- };
-
- reg_cpusldo: cpusldo {
- /* unused */
- };
- };
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_ph_pins>;
- status = "okay";
-};
-
-/* the AXP717 has USB type-C role switch functionality, not yet described by the binding */
-&usbotg {
- dr_mode = "peripheral"; /* USB type-C receptable */
- status = "okay";
-};
-
-&usbphy {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-/*
- * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>.
- * Copyright (C) 2024 Chris Morgan <macroalpha82@gmail.com>.
- */
-
-#include "sun50i-h700-anbernic-rg35xx-plus.dts"
-
-/ {
- model = "Anbernic RG35XX H";
- compatible = "anbernic,rg35xx-h", "allwinner,sun50i-h700";
-};
-
-&gpio_keys_gamepad {
- button-thumbl {
- label = "GPIO Thumb Left";
- gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */
- linux,input-type = <EV_KEY>;
- linux,code = <BTN_THUMBL>;
- };
-
- button-thumbr {
- label = "GPIO Thumb Right";
- gpios = <&pio 4 9 GPIO_ACTIVE_LOW>; /* PE9 */
- linux,input-type = <EV_KEY>;
- linux,code = <BTN_THUMBR>;
- };
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-/*
- * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>.
- */
-
-#include "sun50i-h700-anbernic-rg35xx-2024.dts"
-
-/ {
- model = "Anbernic RG35XX Plus";
- compatible = "anbernic,rg35xx-plus", "allwinner,sun50i-h700";
-
- wifi_pwrseq: pwrseq {
- compatible = "mmc-pwrseq-simple";
- clocks = <&rtc CLK_OSC32K_FANOUT>;
- clock-names = "ext_clock";
- pinctrl-0 = <&x32clk_fanout_pin>;
- pinctrl-names = "default";
- post-power-on-delay-ms = <200>;
- reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
- };
-};
-
-/* SDIO WiFi RTL8821CS */
-&mmc1 {
- vmmc-supply = <®_cldo4>;
- vqmmc-supply = <®_aldo4>;
- mmc-pwrseq = <&wifi_pwrseq>;
- bus-width = <4>;
- non-removable;
- status = "okay";
-
- sdio_wifi: wifi@1 {
- reg = <1>;
- interrupt-parent = <&pio>;
- interrupts = <6 15 IRQ_TYPE_LEVEL_LOW>; /* PG15 */
- interrupt-names = "host-wake";
- };
-};
-
-/* Bluetooth RTL8821CS */
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
- uart-has-rtscts;
- status = "okay";
-
- bluetooth {
- compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
- device-wake-gpios = <&pio 6 17 GPIO_ACTIVE_HIGH>; /* PG17 */
- enable-gpios = <&pio 6 19 GPIO_ACTIVE_HIGH>; /* PG19 */
- host-wake-gpios = <&pio 6 16 GPIO_ACTIVE_HIGH>; /* PG16 */
- };
-};
select ARM64
select DRAM_SUN50I_H616
select SUN50I_GEN_H6
+ imply OF_UPSTREAM
endchoice
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun50i-h616-orangepi-zero2"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun50i-h616-orangepi-zero2"
CONFIG_SPL=y
CONFIG_DRAM_SUN50I_H616_DX_ODT=0x08080808
CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0e0e0e0e
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun50i-h618-orangepi-zero2w"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun50i-h618-orangepi-zero2w"
CONFIG_SPL=y
CONFIG_DRAM_SUN50I_H616_DX_ODT=0x07070707
CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0e0e0e0e
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun50i-h618-orangepi-zero3"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun50i-h618-orangepi-zero3"
CONFIG_SPL=y
CONFIG_DRAM_SUN50I_H616_DX_ODT=0x07070707
CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0e0e0e0e
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun50i-h313-tanix-tx1"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun50i-h313-tanix-tx1"
CONFIG_SPL=y
CONFIG_DRAM_SUN50I_H616_DX_ODT=0x06060606
CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0d0d0d0d
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun50i-h618-transpeed-8k618-t"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun50i-h618-transpeed-8k618-t"
CONFIG_SPL=y
CONFIG_DRAM_SUN50I_H616_DX_ODT=0x03030303
CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0e0e0e0e
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun50i-h616-x96-mate"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun50i-h616-x96-mate"
CONFIG_SPL=y
CONFIG_DRAM_SUN50I_H616_DX_ODT=0x03030303
CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0e0e0e0e
+++ /dev/null
-/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
-/*
- * Copyright (C) 2020 Arm Ltd.
- */
-
-#ifndef _DT_BINDINGS_CLK_SUN50I_H616_H_
-#define _DT_BINDINGS_CLK_SUN50I_H616_H_
-
-#define CLK_PLL_PERIPH0 4
-
-#define CLK_CPUX 21
-
-#define CLK_APB1 26
-
-#define CLK_DE 29
-#define CLK_BUS_DE 30
-#define CLK_DEINTERLACE 31
-#define CLK_BUS_DEINTERLACE 32
-#define CLK_G2D 33
-#define CLK_BUS_G2D 34
-#define CLK_GPU0 35
-#define CLK_BUS_GPU 36
-#define CLK_GPU1 37
-#define CLK_CE 38
-#define CLK_BUS_CE 39
-#define CLK_VE 40
-#define CLK_BUS_VE 41
-#define CLK_BUS_DMA 42
-#define CLK_BUS_HSTIMER 43
-#define CLK_AVS 44
-#define CLK_BUS_DBG 45
-#define CLK_BUS_PSI 46
-#define CLK_BUS_PWM 47
-#define CLK_BUS_IOMMU 48
-
-#define CLK_MBUS_DMA 50
-#define CLK_MBUS_VE 51
-#define CLK_MBUS_CE 52
-#define CLK_MBUS_TS 53
-#define CLK_MBUS_NAND 54
-#define CLK_MBUS_G2D 55
-
-#define CLK_NAND0 57
-#define CLK_NAND1 58
-#define CLK_BUS_NAND 59
-#define CLK_MMC0 60
-#define CLK_MMC1 61
-#define CLK_MMC2 62
-#define CLK_BUS_MMC0 63
-#define CLK_BUS_MMC1 64
-#define CLK_BUS_MMC2 65
-#define CLK_BUS_UART0 66
-#define CLK_BUS_UART1 67
-#define CLK_BUS_UART2 68
-#define CLK_BUS_UART3 69
-#define CLK_BUS_UART4 70
-#define CLK_BUS_UART5 71
-#define CLK_BUS_I2C0 72
-#define CLK_BUS_I2C1 73
-#define CLK_BUS_I2C2 74
-#define CLK_BUS_I2C3 75
-#define CLK_BUS_I2C4 76
-#define CLK_SPI0 77
-#define CLK_SPI1 78
-#define CLK_BUS_SPI0 79
-#define CLK_BUS_SPI1 80
-#define CLK_EMAC_25M 81
-#define CLK_BUS_EMAC0 82
-#define CLK_BUS_EMAC1 83
-#define CLK_TS 84
-#define CLK_BUS_TS 85
-#define CLK_BUS_THS 86
-#define CLK_SPDIF 87
-#define CLK_BUS_SPDIF 88
-#define CLK_DMIC 89
-#define CLK_BUS_DMIC 90
-#define CLK_AUDIO_CODEC_1X 91
-#define CLK_AUDIO_CODEC_4X 92
-#define CLK_BUS_AUDIO_CODEC 93
-#define CLK_AUDIO_HUB 94
-#define CLK_BUS_AUDIO_HUB 95
-#define CLK_USB_OHCI0 96
-#define CLK_USB_PHY0 97
-#define CLK_USB_OHCI1 98
-#define CLK_USB_PHY1 99
-#define CLK_USB_OHCI2 100
-#define CLK_USB_PHY2 101
-#define CLK_USB_OHCI3 102
-#define CLK_USB_PHY3 103
-#define CLK_BUS_OHCI0 104
-#define CLK_BUS_OHCI1 105
-#define CLK_BUS_OHCI2 106
-#define CLK_BUS_OHCI3 107
-#define CLK_BUS_EHCI0 108
-#define CLK_BUS_EHCI1 109
-#define CLK_BUS_EHCI2 110
-#define CLK_BUS_EHCI3 111
-#define CLK_BUS_OTG 112
-#define CLK_BUS_KEYADC 113
-#define CLK_HDMI 114
-#define CLK_HDMI_SLOW 115
-#define CLK_HDMI_CEC 116
-#define CLK_BUS_HDMI 117
-#define CLK_BUS_TCON_TOP 118
-#define CLK_TCON_TV0 119
-#define CLK_TCON_TV1 120
-#define CLK_BUS_TCON_TV0 121
-#define CLK_BUS_TCON_TV1 122
-#define CLK_TVE0 123
-#define CLK_BUS_TVE_TOP 124
-#define CLK_BUS_TVE0 125
-#define CLK_HDCP 126
-#define CLK_BUS_HDCP 127
-#define CLK_PLL_SYSTEM_32K 128
-
-#endif /* _DT_BINDINGS_CLK_SUN50I_H616_H_ */
+++ /dev/null
-/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
-/*
- * Copyright (C) 2020 Arm Ltd.
- */
-
-#ifndef _DT_BINDINGS_RESET_SUN50I_H616_H_
-#define _DT_BINDINGS_RESET_SUN50I_H616_H_
-
-#define RST_MBUS 0
-#define RST_BUS_DE 1
-#define RST_BUS_DEINTERLACE 2
-#define RST_BUS_GPU 3
-#define RST_BUS_CE 4
-#define RST_BUS_VE 5
-#define RST_BUS_DMA 6
-#define RST_BUS_HSTIMER 7
-#define RST_BUS_DBG 8
-#define RST_BUS_PSI 9
-#define RST_BUS_PWM 10
-#define RST_BUS_IOMMU 11
-#define RST_BUS_DRAM 12
-#define RST_BUS_NAND 13
-#define RST_BUS_MMC0 14
-#define RST_BUS_MMC1 15
-#define RST_BUS_MMC2 16
-#define RST_BUS_UART0 17
-#define RST_BUS_UART1 18
-#define RST_BUS_UART2 19
-#define RST_BUS_UART3 20
-#define RST_BUS_UART4 21
-#define RST_BUS_UART5 22
-#define RST_BUS_I2C0 23
-#define RST_BUS_I2C1 24
-#define RST_BUS_I2C2 25
-#define RST_BUS_I2C3 26
-#define RST_BUS_I2C4 27
-#define RST_BUS_SPI0 28
-#define RST_BUS_SPI1 29
-#define RST_BUS_EMAC0 30
-#define RST_BUS_EMAC1 31
-#define RST_BUS_TS 32
-#define RST_BUS_THS 33
-#define RST_BUS_SPDIF 34
-#define RST_BUS_DMIC 35
-#define RST_BUS_AUDIO_CODEC 36
-#define RST_BUS_AUDIO_HUB 37
-#define RST_USB_PHY0 38
-#define RST_USB_PHY1 39
-#define RST_USB_PHY2 40
-#define RST_USB_PHY3 41
-#define RST_BUS_OHCI0 42
-#define RST_BUS_OHCI1 43
-#define RST_BUS_OHCI2 44
-#define RST_BUS_OHCI3 45
-#define RST_BUS_EHCI0 46
-#define RST_BUS_EHCI1 47
-#define RST_BUS_EHCI2 48
-#define RST_BUS_EHCI3 49
-#define RST_BUS_OTG 50
-#define RST_BUS_HDMI 51
-#define RST_BUS_HDMI_SUB 52
-#define RST_BUS_TCON_TOP 53
-#define RST_BUS_TCON_TV0 54
-#define RST_BUS_TCON_TV1 55
-#define RST_BUS_TVE_TOP 56
-#define RST_BUS_TVE0 57
-#define RST_BUS_HDCP 58
-#define RST_BUS_KEYADC 59
-
-#endif /* _DT_BINDINGS_RESET_SUN50I_H616_H_ */
projects / u-boot.git / commitdiff
