Sandbox pci works using emulation drivers which are currently children of
the pci device:
pci-controller {
pci@1f,0 {
compatible = "pci-generic";
reg = <0xf800 0 0 0 0>;
emul@1f,0 {
compatible = "sandbox,swap-case";
};
};
};
In this case the emulation device is attached to pci device on address
f800 (device 1f, function 0) and provides the swap-case functionality.
However this is not ideal, since every device on a PCI bus has a child
device. This is only really the case for sandbox, but we want to avoid
special-case code for sandbox.
Worse, child devices cannot be probed before their parents. This forces
us to use 'find' rather than 'get' to obtain the emulator device. In fact
the emulator devices are never probed. There is code in
sandbox_pci_emul_post_probe() which tries to track when emulators are
active, but at present this does not work.
A better approach seems to be to add a separate node elsewhere in the
device tree, an 'emulation parent'. This could be given a bogus address
(such as -1) to hide the emulators away from the 'pci' command, but it
seems better to keep it at the root node to avoid such hacks.
Then we can use a phandle to point from the device to the correct
emulator, and only on sandbox. The code to find an emulator does not
interfere with normal pci operation.
Add a new UCLASS_PCI_EMUL_PARENT uclass which allows finding an emulator
given a bus, and finding a bus given an emulator. Update the existing
device trees and the code for finding an emulator.
This brings PCI emulators more into line with I2C.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: fix 3 typos in the commit message;
encode bus number in the labels of swap_case_emul nodes;
mention commit
4345998ae9df in sandbox_pci_get_emul()]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
pci@1f,0 {
compatible = "pci-generic";
reg = <0xf800 0 0 0 0>;
- emul@1f,0 {
- compatible = "sandbox,swap-case";
- };
+ sandbox,emul = <&swap_case_emul>;
+ };
+ };
+
+ emul {
+ compatible = "sandbox,pci-emul-parent";
+ swap_case_emul: emul@1f,0 {
+ compatible = "sandbox,swap-case";
};
};
pci@0,0 {
compatible = "pci-generic";
reg = <0x0000 0 0 0 0>;
- emul@0,0 {
- compatible = "sandbox,swap-case";
- };
+ sandbox,emul = <&swap_case_emul0_0>;
};
pci@1,0 {
compatible = "pci-generic";
reg = <0x0800 0 0 0 0>;
- emul@0,0 {
- compatible = "sandbox,swap-case";
- use-ea;
- };
+ sandbox,emul = <&swap_case_emul0_1>;
};
pci@1f,0 {
compatible = "pci-generic";
reg = <0xf800 0 0 0 0>;
- emul@1f,0 {
- compatible = "sandbox,swap-case";
- };
+ sandbox,emul = <&swap_case_emul0_1f>;
+ };
+ };
+
+ pci-emul0 {
+ compatible = "sandbox,pci-emul-parent";
+ swap_case_emul0_0: emul0@0,0 {
+ compatible = "sandbox,swap-case";
+ };
+ swap_case_emul0_1: emul0@1,0 {
+ compatible = "sandbox,swap-case";
+ use-ea;
+ };
+ swap_case_emul0_1f: emul0@1f,0 {
+ compatible = "sandbox,swap-case";
};
};
pci@1f,0 {
compatible = "pci-generic";
reg = <0xf800 0 0 0 0>;
- emul@1f,0 {
- compatible = "sandbox,swap-case";
- };
+ sandbox,emul = <&swap_case_emul2_1f>;
+ };
+ };
+
+ pci-emul2 {
+ compatible = "sandbox,pci-emul-parent";
+ swap_case_emul2_1f: emul2@1f,0 {
+ compatible = "sandbox,swap-case";
};
};
-------
With sandbox we need a device emulator for each device on the bus since there
-is no real PCI bus. This works by looking in the device tree node for a
-driver. For example::
-
+is no real PCI bus. This works by looking in the device tree node for an
+emulator driver. For example::
pci@1f,0 {
compatible = "pci-generic";
reg = <0xf800 0 0 0 0>;
- emul@1f,0 {
+ sandbox,emul = <&emul_1f>;
+ };
+ pci-emul {
+ compatible = "sandbox,pci-emul-parent";
+ emul_1f: emul@1f,0 {
compatible = "sandbox,swap-case";
};
};
PCI_BDF() for the encoding (it is also specified in the IEEE Std 1275-1994
PCI bus binding document, v2.1)
+The pci-emul node should go outside the pci bus node, since otherwise it will
+be scanned as a PCI device, causing confusion.
+
When this bus is scanned we will end up with something like this::
`- * pci-controller @ 05c660c8, 0
`- pci@1f,0 @ 05c661c8, 63488
- `- emul@1f,0 @ 05c662c8
+ `- emul@1f,0 @ 05c662c8
-When accesses go to the pci@1f,0 device they are forwarded to its child, the
-emulator.
+When accesses go to the pci@1f,0 device they are forwarded to its emulator.
The sandbox PCI drivers also support dynamic driver binding, allowing device
driver to declare the driver binding information via U_BOOT_PCI_DEVICE(),
pci [ + ] pci_sandbo |-- pci-controller1
pci_emul [ ] sandbox_sw | |-- sandbox_swap_case_emul
pci_emul [ ] sandbox_sw | `-- sandbox_swap_case_emul
-
-Note the difference from the statically declared device nodes is that the
-device is directly attached to the host controller, instead of via a container
-device like pci@1f,0.
#include <linux/libfdt.h>
#include <pci.h>
#include <dm/lists.h>
+#include <dm/uclass-internal.h>
struct sandbox_pci_emul_priv {
int dev_count;
}
*containerp = dev;
- if (device_get_uclass_id(dev) == UCLASS_PCI_GENERIC) {
- ret = device_find_first_child(dev, emulp);
- if (ret)
- return ret;
- } else {
+ /*
+ * See commit 4345998ae9df,
+ * "pci: sandbox: Support dynamically binding device driver"
+ */
+ ret = uclass_find_device_by_phandle(UCLASS_PCI_EMUL, dev,
+ "sandbox,emul", emulp);
+ if (ret && device_get_uclass_id(dev) != UCLASS_PCI_GENERIC)
*emulp = dev;
- }
return *emulp ? 0 : -ENODEV;
}
.pre_remove = sandbox_pci_emul_pre_remove,
.priv_auto_alloc_size = sizeof(struct sandbox_pci_emul_priv),
};
+
+/*
+ * This uclass is a child of the pci bus. Its platdata is not defined here so
+ * is defined by its parent, UCLASS_PCI, which uses struct pci_child_platdata.
+ * See per_child_platdata_auto_alloc_size in UCLASS_DRIVER(pci).
+ */
+UCLASS_DRIVER(pci_emul_parent) = {
+ .id = UCLASS_PCI_EMUL_PARENT,
+ .name = "pci_emul_parent",
+ .post_bind = dm_scan_fdt_dev,
+};
+
+static const struct udevice_id pci_emul_parent_ids[] = {
+ { .compatible = "sandbox,pci-emul-parent" },
+ { }
+};
+
+U_BOOT_DRIVER(pci_emul_parent_drv) = {
+ .name = "pci_emul_parent_drv",
+ .id = UCLASS_PCI_EMUL_PARENT,
+ .of_match = pci_emul_parent_ids,
+};
UCLASS_I2C_EMUL, /* sandbox I2C device emulator */
UCLASS_I2C_EMUL_PARENT, /* parent for I2C device emulators */
UCLASS_PCI_EMUL, /* sandbox PCI device emulator */
+ UCLASS_PCI_EMUL_PARENT, /* parent for PCI device emulators */
UCLASS_USB_EMUL, /* sandbox USB bus device emulator */
UCLASS_AXI_EMUL, /* sandbox AXI bus device emulator */
projects / u-boot.git / commitdiff
