board: odroid-c2: use common ethernet init function

Switch Odroid-C2 Ethernet init to the common Ethernet init function.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

diff --git a/board/amlogic/odroid-c2/odroid-c2.c b/board/amlogic/odroid-c2/odroid-c2.c
index a5ea8dc5af2ff40fe22c7fac5289d771890264ee..d68d0f134446eff16f39ce73d4576cd279e2b816 100644 (file)
--- a/board/amlogic/odroid-c2/odroid-c2.c
+++ b/board/amlogic/odroid-c2/odroid-c2.c
@@ -9,7 +9,7 @@
 #include <asm/io.h>
 #include <asm/arch/gxbb.h>
 #include <asm/arch/sm.h>
-#include <phy.h>
+#include <asm/arch/eth.h>
 
 #define EFUSE_SN_OFFSET                20
 #define EFUSE_SN_SIZE          16
@@ -27,17 +27,10 @@ int misc_init_r(void)
        char serial[EFUSE_SN_SIZE];
        ssize_t len;
 
-       /* Set RGMII mode */
-       setbits_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_PHY_INTF |
-                                    GXBB_ETH_REG_0_TX_PHASE(1) |
-                                    GXBB_ETH_REG_0_TX_RATIO(4) |
-                                    GXBB_ETH_REG_0_PHY_CLK_EN |
-                                    GXBB_ETH_REG_0_CLK_EN);
+       meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
 
        /* Enable power and clock gate */
        setbits_le32(GXBB_GCLK_MPEG_0, GXBB_GCLK_MPEG_0_I2C);
-       setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH);
-       clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK);
 
        /* Reset PHY on GPIOZ_14 */
        clrbits_le32(GXBB_GPIO_EN(3), BIT(14));