+.. SPDX-License-Identifier: GPL-2.0+
+
+mx6ullevk
+=========
+
How to use U-Boot on Freescale MX6ULL 14x14 EVK
-----------------------------------------------
+-----------------------------------------------
- First make sure you have installed the dtc package (device tree compiler):
-$ sudo apt-get install device-tree-compiler
+.. code-block:: bash
+
+ $ sudo apt-get install device-tree-compiler
- Build U-Boot for MX6ULL 14x14 EVK:
-$ make mrproper
-$ make mx6ull_14x14_evk_defconfig
-$ make
+.. code-block:: bash
+
+ $ make mrproper
+ $ make mx6ull_14x14_evk_defconfig
+ $ make
This generates the u-boot-dtb.imx image in the current directory.
- Flash the u-boot-dtb.imx image into the micro SD card:
-$ sudo dd if=u-boot-dtb.imx of=/dev/sdb bs=1K seek=1 conv=notrunc && sync
+.. code-block:: bash
+
+ $ sudo dd if=u-boot-dtb.imx of=/dev/sdb bs=1K seek=1 conv=notrunc && sync
-- Jumper settings:
+- Jumper settings::
-SW601: 0 0 1 0
-Sw602: 1 0
+ SW601: 0 0 1 0
+ Sw602: 1 0
Where 0 means bottom position and 1 means top position (from the switch label
numbers reference).