ARM: renesas: Enable UFS on R8A779F0 S4 Spider

Enable UFS controller driver and matching UFS and SCSI commands. The
former is used to initialize the device, the later is used to perform
low level access to the SCSI interface of the UFS device.

Enable R8A779F0 S4 Spider specific dependencies, the PCA953x driver
and GPIO clock gate driver. This setup is used to toggle 38.4 MHz
clock for the UFS controller.

Enable support for 48bit LBA in block layer to address disks larger
than 512*2^32 ~= 144 PiB. Enable use of 64bit LBA variables in the
rest of U-Boot, instead of the default 32bit ones.

Increase FAT cluster size to 128k as that is what is used by the
filesystem that is populated on the UFS device.

Use 'ufs init && scsi scan' to start the UFS device from U-Boot prompt.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

diff --git a/configs/r8a779f0_spider_defconfig b/configs/r8a779f0_spider_defconfig
index 0edacc4d5696ac9cf82c09f9c4550e0ba8791861..f250d1a13c1fb93601a307c86797f3d1e1569d18 100644 (file)
--- a/configs/r8a779f0_spider_defconfig
+++ b/configs/r8a779f0_spider_defconfig
@@ -31,7 +31,9 @@ CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
 CONFIG_CMD_SPI=y
+CONFIG_CMD_UFS=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
@@ -46,9 +48,13 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_VERSION_VARIABLE=y
 CONFIG_REGMAP=y
 CONFIG_SYSCON=y
+CONFIG_LBA48=y
+CONFIG_SYS_64BIT_LBA=y
 CONFIG_CLK=y
+CONFIG_CLK_GPIO=y
 CONFIG_CLK_RENESAS=y
 CONFIG_RCAR_GPIO=y
+CONFIG_DM_PCA953X=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_RCAR_I2C=y
 CONFIG_MMC_IO_VOLTAGE=y
@@ -67,8 +73,13 @@ CONFIG_PHY_R8A779F0_ETHERNET_SERDES=y
 CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_SCSI=y
+CONFIG_DM_SCSI=y
 CONFIG_BAUDRATE=1843200
 CONFIG_SCIF_CONSOLE=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_RENESAS_RPC_SPI=y
+CONFIG_UFS=y
+CONFIG_UFS_RENESAS=y
+CONFIG_FS_FAT_MAX_CLUSTSIZE=131072