config TARGET_CM_T43
bool "Support cm_t43"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
config ARCH_SUNXI
bool "Support sunxi (Allwinner) SoCs"
source "arch/arm/cpu/armv7/mx5/Kconfig"
-source "arch/arm/cpu/armv7/omap-common/Kconfig"
+source "arch/arm/mach-omap2/Kconfig"
source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
# TODO: rename CONFIG_TEGRA -> CONFIG_ARCH_TEGRA
# TODO: rename CONFIG_ORION5X -> CONFIG_ARCH_ORION5X
machine-$(CONFIG_ORION5X) += orion5x
+machine-$(CONFIG_ARCH_OMAP2) += omap2
machine-$(CONFIG_ARCH_S5PC1XX) += s5pc1xx
machine-$(CONFIG_ARCH_SUNXI) += sunxi
machine-$(CONFIG_ARCH_SNAPDRAGON) += snapdragon
obj-$(CONFIG_IPROC) += iproc-common/
obj-$(CONFIG_KONA) += kona-common/
-obj-$(CONFIG_OMAP_COMMON) += omap-common/
obj-$(CONFIG_SYS_ARCH_TIMER) += arch_timer.o
ifneq (,$(filter s5pc1xx exynos,$(SOC)))
obj-y += s5p-common/
endif
-obj-$(if $(filter am33xx,$(SOC)),y) += am33xx/
obj-$(if $(filter bcm235xx,$(SOC)),y) += bcm235xx/
obj-$(if $(filter bcm281xx,$(SOC)),y) += bcm281xx/
obj-$(if $(filter bcmcygnus,$(SOC)),y) += bcmcygnus/
obj-$(if $(filter mx5,$(SOC)),y) += mx5/
obj-$(CONFIG_MX6) += mx6/
obj-$(CONFIG_MX7) += mx7/
-obj-$(CONFIG_OMAP34XX) += omap3/
-obj-$(CONFIG_OMAP44XX) += omap4/
-obj-$(CONFIG_OMAP54XX) += omap5/
obj-$(CONFIG_RMOBILE) += rmobile/
obj-$(if $(filter stv0991,$(SOC)),y) += stv0991/
obj-$(CONFIG_ARCH_SUNXI) += sunxi/
+++ /dev/null
-#
-# Copyright 2011 Linaro Limited
-#
-# (C) Copyright 2010
-# Texas Instruments, <www.ti.com>
-#
-# Aneesh V <aneesh@ti.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-ifdef CONFIG_SPL_BUILD
-ALL-y += MLO
-else
-ALL-y += u-boot.img
-endif
+++ /dev/null
-#
-# Copyright 2011 Linaro Limited
-#
-# (C) Copyright 2010
-# Texas Instruments, <www.ti.com>
-#
-# Aneesh V <aneesh@ti.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-ifdef CONFIG_SPL_BUILD
-ALL-y += MLO
-else
-ALL-y += u-boot.img
-endif
+++ /dev/null
-#
-# Copyright 2011 Linaro Limited
-#
-# Aneesh V <annesh@ti.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-include $(srctree)/$(CPUDIR)/omap-common/config_secure.mk
-
-ifdef CONFIG_SPL_BUILD
-ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
-ALL-y += u-boot-spl_HS_MLO u-boot-spl_HS_X-LOADER
-else
-ALL-y += MLO
-endif
-else
-ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
-ALL-$(CONFIG_SPL_LOAD_FIT) += u-boot_HS.img
-endif
-ALL-y += u-boot.img
-endif
authenticated) and the code. See the doc/README.ti-secure
file for further details.
-source "arch/arm/cpu/armv7/omap3/Kconfig"
+source "arch/arm/mach-omap2/omap3/Kconfig"
-source "arch/arm/cpu/armv7/omap4/Kconfig"
+source "arch/arm/mach-omap2/omap4/Kconfig"
-source "arch/arm/cpu/armv7/omap5/Kconfig"
+source "arch/arm/mach-omap2/omap5/Kconfig"
-source "arch/arm/cpu/armv7/am33xx/Kconfig"
+source "arch/arm/mach-omap2/am33xx/Kconfig"
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y := reset.o
+obj-$(if $(filter am33xx,$(SOC)),y) += am33xx/
+obj-$(CONFIG_OMAP34XX) += omap3/
+obj-$(CONFIG_OMAP44XX) += omap4/
+obj-$(CONFIG_OMAP54XX) += omap5/
+
+obj-y += reset.o
ifeq ($(CONFIG_TIMER),)
obj-y += timer.o
else
#
# Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
#
-# SPDX-License-Identifier: GPL-2.0+
-#
+# SPDX-License-Identifier: GPL-2.0+
-include $(srctree)/$(CPUDIR)/omap-common/config_secure.mk
+include $(srctree)/arch/arm/mach-omap2/config_secure.mk
ifdef CONFIG_SPL_BUILD
-ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
+ifeq ($(CONFIG_AM33XX)$(CONFIG_TI_SECURE_DEVICE),yy)
#
# For booting from SPI use
# u-boot-spl_HS_SPI_X-LOADER to program flash
#
# Refer to README.ti-secure for more info
#
-ALL-y += u-boot-spl_HS_ISSW
+ALL-y += u-boot-spl_HS_ISSW
ALL-y += u-boot-spl_HS_SPI_X-LOADER
ALL-y += u-boot-spl_HS_X-LOADER
ALL-y += u-boot-spl_HS_MLO
ALL-y += u-boot-spl_HS_2ND
else
-ALL-y += MLO
+ifeq ($(CONFIG_OMAP54XX)$(CONFIG_TI_SECURE_DEVICE),yy)
+ALL-y += u-boot-spl_HS_MLO u-boot-spl_HS_X-LOADER
+else
+ALL-y += MLO
+ifeq ($(CONFIG_AM33XX),y)
ALL-y += MLO.byteswap
endif
+endif
+endif
else
ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
ALL-$(CONFIG_QSPI_BOOT) += u-boot_HS_XIP_X-LOADER
ALL-$(CONFIG_SPL_LOAD_FIT) += u-boot_HS.img
endif
-ALL-y += u-boot.img
+ALL-y += u-boot.img
endif
/* USB gadget RNDIS */
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
#endif
#ifdef CONFIG_NAND
#undef CONFIG_USE_IRQ
/* SPL */
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
/* SPL */
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
#ifndef CONFIG_SPL_USBETH_SUPPORT
#define CONFIG_FASTBOOT_FLASH_MMC_DEV 1
#define CONFIG_BOOTCOUNT_AM33XX
#define CONFIG_SYS_BOOTCOUNT_BE
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
#ifndef CONFIG_SPL_USBETH_SUPPORT
#define CONFIG_FASTBOOT_FLASH_MMC_DEV 1
#define CONFIG_SPL_NAND_BASE
#define CONFIG_SPL_NAND_DRIVERS
#define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
/* NAND boot config */
#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
#define CONFIG_SPL_NAND_BASE
#define CONFIG_SPL_NAND_DRIVERS
#define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
#endif /* __CONFIG_H */
#define FAT_ENV_FILE "uboot.env"
#define CONFIG_FAT_WRITE
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
/* SPL USB Support */
/* General network SPL, both CPSW and USB gadget RNDIS */
#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"*/
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
#ifdef CONFIG_NAND
#define CONFIG_NAND_OMAP_GPMC
/* USB gadget RNDIS */
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
#endif
#ifdef CONFIG_NAND
/* General parts of the framework, required. */
#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
#endif /* ! __BUR_AM335X_COMMON_H__ */
#define CONFIG_SYS_I2C_EEPROM_BUS 0
/* SPL */
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
/* Network. */
#define CONFIG_PHY_GIGE
#define CONFIG_SPL_NAND_DRIVERS
#define CONFIG_SPL_NAND_ECC
#define CONFIG_SPL_OMAP3_ID_NAND
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
/* NAND boot config */
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_ENV_OFFSET (768 * 1024)
#define CONFIG_ENV_SPI_MAX_HZ 48000000
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
/* Enhance our eMMC support / experience. */
#define CONFIG_CMD_GPT
* or 64KB
*/
#define CONFIG_SYS_THUMB_BUILD
-#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
#define CONFIG_SPL_TEXT_BASE 0x00908000
#define CONFIG_SPL_MAX_SIZE 0x10000
#define CONFIG_SPL_STACK 0x0091FFB8
#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
#define CONFIG_SYS_SPL_MALLOC_SIZE (1024 * 1024)
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 2
#define CONFIG_SPL_NAND_BASE
#define CONFIG_SPL_NAND_DRIVERS
#define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
#define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/
#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_OMAP3_ID_NAND
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
/*
* 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
/* CPU */
#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
#ifdef CONFIG_SPI_BOOT
#define CONFIG_SPL_SPI_LOAD
/* CPSW support */
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
#endif /* ! __CONFIG_PENGWYN_H */
#define CONFIG_PHY_RESET_DELAY 1000
/* SPL */
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
#endif /* __CONFIG_PEPPER_H */
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NAND_AM33XX_BCH
#define CONFIG_SYS_SPL_MALLOC_SIZE (1024 * 1024)
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 2
#define CONFIG_SPL_NAND_BASE
#define CONFIG_SPL_NAND_DRIVERS
#define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
#define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/
#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
#define CONFIG_SPL_NAND_DRIVERS
#define CONFIG_SPL_NAND_ECC
#define CONFIG_SPL_OMAP3_ID_NAND
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
/* NAND boot config */
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
#define CONFIG_SPL_BOARD_INIT
/* SPL */
#define CONFIG_SPL_TEXT_BASE 0x40200800
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
(64 << 20))
* So moving TEXT_BASE down to non-HS limit.
*/
#define CONFIG_SPL_TEXT_BASE 0x40300000
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
(128 << 20))
#define CONFIG_SPL_TEXT_BASE 0x40300000
#endif
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
(128 << 20))
#define CONFIG_SPL_NAND_BASE
#define CONFIG_SPL_NAND_DRIVERS
#define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1