phycore_imx93: include common overlays.env

Include the common overlays env file for phycore_imx93.
The common overlays env file supports disabling loading overlays by
setting the no_overlays variable.

Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>

diff --git a/board/phytec/phycore_imx93/phycore_imx93.env b/board/phytec/phycore_imx93/phycore_imx93.env
index 27bfadfa140f8675e97a1f3babbaa95127122b7d..09542f5aa7de26af7f375a4fc57727a23be22b4f 100644 (file)
--- a/board/phytec/phycore_imx93/phycore_imx93.env
+++ b/board/phytec/phycore_imx93/phycore_imx93.env
@@ -1,5 +1,7 @@
 /* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
 
+#include <env/phytec/overlays.env>
+
 image=Image
 console=ttyLP0
 fdt_addr=0x83000000
@@ -7,8 +9,6 @@ fdto_addr=0x830c0000
 bootenv_addr=0x83500000
 fdt_file=CONFIG_DEFAULT_FDT_FILE
 ip_dyn=yes
-bootenv=bootenv.txt
-mmc_load_bootenv=fatload mmc ${mmcdev}:${mmcpart} ${bootenv_addr} ${bootenv}
 mmcdev=CONFIG_SYS_MMC_ENV_DEV
 mmcpart=1
 mmcroot=2
@@ -17,16 +17,6 @@ mmcargs=setenv bootargs console=${console},${baudrate} earlycon
        root=/dev/mmcblk${mmcdev}p${mmcroot} ${raucargs} rootwait rw
 loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}
 loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}
-mmc_load_overlay=fatload mmc ${mmcdev}:${mmcpart} ${fdto_addr} ${overlay}
-mmc_apply_overlays=
-       fdt address ${fdt_addr};
-       for overlay in ${overlays};
-       do;
-               if run mmc_load_overlay; then
-                       fdt resize ${filesize};
-                       fdt apply ${fdto_addr};
-               fi;
-       done;
 mmcboot=
        echo Booting from mmc ...;
        if run mmc_load_bootenv; then
@@ -42,17 +32,6 @@ mmcboot=
 nfsroot=/nfs
 netargs=setenv bootargs console=${console},${baudrate} earlycon
        root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp
-net_load_bootenv=${get_cmd} ${bootenv_addr} ${bootenv}
-net_load_overlay=${get_cmd} ${fdto_addr} ${overlay}
-net_apply_overlays=
-       fdt address ${fdt_addr};
-       for overlay in ${overlays};
-       do;
-               if run net_load_overlay; then
-                       fdt resize ${filesize};
-                       fdt apply ${fdto_addr};
-               fi;
-       done;
 netboot=
        echo Booting from net ...;
        run netargs;