+++ /dev/null
-/*
- * (C) Copyright 2004-2009
- * Texas Instruments Incorporated, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-#include <netdev.h>
-#include <twl4030.h>
-#include <asm/io.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/mach-types.h>
-#include "sdp.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-const omap3_sysinfo sysinfo = {
- DDR_DISCRETE,
- "OMAP3 SDP3430 board",
-#if defined(CONFIG_ENV_IS_IN_ONENAND)
- "OneNAND",
-#elif defined(CONFIG_ENV_IS_IN_NAND)
- "NAND",
-#else
- "NOR",
-#endif
-};
-
-/* Timing definitions for GPMC controller for Sibley NOR */
-static const u32 gpmc_sdp_nor[] = {
- SDP3430_NOR_GPMC_CONF1,
- SDP3430_NOR_GPMC_CONF2,
- SDP3430_NOR_GPMC_CONF3,
- SDP3430_NOR_GPMC_CONF4,
- SDP3430_NOR_GPMC_CONF5,
- SDP3430_NOR_GPMC_CONF6,
- /*CONF7- computed as params */
-};
-
-/*
- * Timing definitions for GPMC controller for Debug Board
- * Debug board contains access to ethernet and DIP Switch setting
- * information etc.
- */
-static const u32 gpmc_sdp_debug[] = {
- SDP3430_DEBUG_GPMC_CONF1,
- SDP3430_DEBUG_GPMC_CONF2,
- SDP3430_DEBUG_GPMC_CONF3,
- SDP3430_DEBUG_GPMC_CONF4,
- SDP3430_DEBUG_GPMC_CONF5,
- SDP3430_DEBUG_GPMC_CONF6,
- /*CONF7- computed as params */
-};
-
-/* Timing defintions for GPMC OneNAND */
-static const u32 gpmc_sdp_onenand[] = {
- SDP3430_ONENAND_GPMC_CONF1,
- SDP3430_ONENAND_GPMC_CONF2,
- SDP3430_ONENAND_GPMC_CONF3,
- SDP3430_ONENAND_GPMC_CONF4,
- SDP3430_ONENAND_GPMC_CONF5,
- SDP3430_ONENAND_GPMC_CONF6,
- /*CONF7- computed as params */
-};
-
-/* GPMC definitions for GPMC NAND */
-static const u32 gpmc_sdp_nand[] = {
- SDP3430_NAND_GPMC_CONF1,
- SDP3430_NAND_GPMC_CONF2,
- SDP3430_NAND_GPMC_CONF3,
- SDP3430_NAND_GPMC_CONF4,
- SDP3430_NAND_GPMC_CONF5,
- SDP3430_NAND_GPMC_CONF6,
- /*CONF7- computed as params */
-};
-
-/* gpmc_cfg is initialized by gpmc_init and we use it here */
-extern struct gpmc *gpmc_cfg;
-
-/**
- * @brief board_init - gpmc and basic setup as phase1 of boot sequence
- *
- * @return 0
- */
-int board_init(void)
-{
- gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
- /* TODO: Dynamically pop out CS mapping and program accordingly */
- /* Configure devices for default ON ON ON settings */
- enable_gpmc_cs_config(gpmc_sdp_nor, &gpmc_cfg->cs[0],
- CONFIG_SYS_FLASH_BASE, GPMC_SIZE_128M);
- enable_gpmc_cs_config(gpmc_sdp_nand, &gpmc_cfg->cs[1], 0x28000000,
- GPMC_SIZE_16M);
- enable_gpmc_cs_config(gpmc_sdp_onenand, &gpmc_cfg->cs[2], 0x20000000,
- GPMC_SIZE_16M);
- enable_gpmc_cs_config(gpmc_sdp_debug, &gpmc_cfg->cs[3], DEBUG_BASE,
- GPMC_SIZE_16M);
- /* board id for Linux */
- gd->bd->bi_arch_number = MACH_TYPE_OMAP_3430SDP;
- /* boot param addr */
- gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-
- return 0;
-}
-
-#define LAN_RESET_REGISTER (CONFIG_LAN91C96_BASE + 0x01c)
-#define ETH_CONTROL_REG (CONFIG_LAN91C96_BASE + 0x30b)
-
-/**
- * @brief board_eth_init Take the Ethernet controller out of reset and wait
- * for the EEPROM load to complete.
- */
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_LAN91C96
- int cnt = 20;
-
- writew(0x0, LAN_RESET_REGISTER);
- do {
- writew(0x1, LAN_RESET_REGISTER);
- udelay(100);
- if (cnt == 0)
- goto reset_err_out;
- --cnt;
- } while (readw(LAN_RESET_REGISTER) != 0x1);
-
- cnt = 20;
-
- do {
- writew(0x0, LAN_RESET_REGISTER);
- udelay(100);
- if (cnt == 0)
- goto reset_err_out;
- --cnt;
- } while (readw(LAN_RESET_REGISTER) != 0x0000);
- udelay(1000);
-
- writeb(readb(ETH_CONTROL_REG) & ~0x1, ETH_CONTROL_REG);
- udelay(1000);
- rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
-reset_err_out:
-
-#endif
- return rc;
-}
-
-/**
- * @brief misc_init_r - Configure SDP board specific configurations
- * such as power configurations, ethernet initialization as phase2 of
- * boot sequence
- *
- * @return 0
- */
-int misc_init_r(void)
-{
- /* Partial setup:
- * VAUX3 - 2.8V for DVI
- * VPLL1 - 1.8V
- * VDAC - 1.8V
- * and turns on LEDA/LEDB (not needed ... NOP?)
- */
- twl4030_power_init();
-
- /* FIXME finish setup:
- * VAUX1 - 2.8V for mainboard I/O
- * VAUX2 - 2.8V for camera
- * VAUX4 - 1.8V for OMAP3 CSI
- * VMMC1 - 3.15V (init, variable) for MMC1
- * VMMC2 - 1.85V for MMC2
- * VSIM - off (init, variable) for MMC1.DAT[3..7], SIM
- * VPLL2 - 1.8V
- */
-
- return 0;
-}
-
-/**
- * @brief set_muxconf_regs Setting up the configuration Mux registers
- * specific to the hardware. Many pins need to be moved from protect
- * to primary mode.
- */
-void set_muxconf_regs(void)
-{
- /* platform specific muxes */
- MUX_SDP3430();
-}
-
-#ifdef CONFIG_GENERIC_MMC
-int board_mmc_init(bd_t *bis)
-{
- return omap_mmc_init(0, 0, 0, -1, -1);
-}
-
-void board_mmc_power_init(void)
-{
- twl4030_power_mmc_init(0);
-}
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2004-2009
- * Texas Instruments Incorporated
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef _BOARD_SDP_H_
-#define _BOARD_SDP_H_
-
-#define OFF_IN_PD 0
-#define OFF_OUT_PD 0
-
-/*
- * IEN - Input Enable
- * IDIS - Input Disable
- * PTD - Pull type Down
- * PTU - Pull type Up
- * DIS - Pull type selection is inactive
- * EN - Pull type selection is active
- * M0 - Mode 0
- * The commented string gives the final mux configuration for that pin
- */
-#define MUX_SDP3430()\
- /*SDRC*/\
- MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0))\
- /*GPMC*/\
- MUX_VAL(CP(GPMC_A1), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_A2), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_A3), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_A4), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_A5), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_A6), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_A7), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_A8), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_A9), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_A10), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_D0), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_D1), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_D2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_D3), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_D4), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_D5), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_D6), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_D7), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_D8), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_D9), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_D10), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_D11), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_D12), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_D13), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_D14), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_D15), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_NCS0), (OFF_OUT_PD | IDIS | PTU | EN | M0))\
- MUX_VAL(CP(GPMC_NCS1), (OFF_OUT_PD | IDIS | PTU | EN | M0))\
- MUX_VAL(CP(GPMC_NCS2), (OFF_OUT_PD | IDIS | PTU | EN | M0))\
- MUX_VAL(CP(GPMC_NCS3), (OFF_OUT_PD | IDIS | PTU | EN | M0))\
- MUX_VAL(CP(GPMC_NCS4), (OFF_IN_PD | IEN | PTU | EN | M4)) /*G55-F_DIS*/\
- MUX_VAL(CP(GPMC_NCS5), (OFF_OUT_PD | IDIS | PTD | DIS | M4))/*G56T_EN*/\
- MUX_VAL(CP(GPMC_NCS6), (OFF_IN_PD | IEN | PTD | DIS | M4))/*G57-AGPSP*/\
- MUX_VAL(CP(GPMC_NCS7), (OFF_IN_PD | IEN | PTU | EN | M4))/*G58-WLNIQ*/\
- MUX_VAL(CP(GPMC_CLK), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_NADV_ALE), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_NOE), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_NWE), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_NBE0_CLE), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_NBE1), (OFF_IN_PD | IEN | PTD | DIS | M4)) /*G61-BTST*/\
- MUX_VAL(CP(GPMC_NWP), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_WAIT0), (OFF_IN_PD | IEN | PTU | EN | M0))\
- MUX_VAL(CP(GPMC_WAIT1), (OFF_IN_PD | IEN | PTU | EN | M0))\
- MUX_VAL(CP(GPMC_WAIT2), (OFF_IN_PD | IEN | PTU | EN | M4)) /*GPIO_64*/\
- MUX_VAL(CP(GPMC_WAIT3), (OFF_IN_PD | IEN | PTU | EN | M4)) /*GPIO_65*/\
- /*DSS*/\
- MUX_VAL(CP(DSS_PCLK), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_HSYNC), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_VSYNC), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_ACBIAS), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_DATA0), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_DATA1), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_DATA2), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_DATA3), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_DATA4), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_DATA5), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_DATA6), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_DATA7), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_DATA8), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_DATA9), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_DATA10), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_DATA11), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_DATA12), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_DATA13), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_DATA14), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_DATA15), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_DATA16), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_DATA17), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_DATA18), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_DATA19), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_DATA20), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_DATA21), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_DATA22), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_DATA23), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- /*CAMERA*/\
- MUX_VAL(CP(CAM_HS), (OFF_IN_PD | IEN | PTU | EN | M0))\
- MUX_VAL(CP(CAM_VS), (OFF_IN_PD | IEN | PTU | EN | M0))\
- MUX_VAL(CP(CAM_XCLKA), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(CAM_PCLK), (OFF_IN_PD | IEN | PTU | EN | M0))\
- MUX_VAL(CP(CAM_FLD), (OFF_OUT_PD | IDIS | PTD | DIS | M4))/*G98-C_RST*/\
- MUX_VAL(CP(CAM_D0), (OFF_IN_PD | IEN | PTD | DIS | M2)) /*CAM_D0 */\
- MUX_VAL(CP(CAM_D1), (OFF_IN_PD | IEN | PTD | DIS | M2)) /*CAM_D1 */\
- MUX_VAL(CP(CAM_D2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(CAM_D3), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(CAM_D4), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(CAM_D5), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(CAM_D6), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(CAM_D7), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(CAM_D8), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(CAM_D9), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(CAM_D10), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(CAM_D11), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(CAM_XCLKB), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(CAM_WEN), (OFF_IN_PD | IEN | PTD | DIS | M4)) /*GPIO_167*/\
- MUX_VAL(CP(CAM_STROBE), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(CSI2_DX0), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(CSI2_DY0), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(CSI2_DX1), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(CSI2_DY1), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- /*Audio InterfACe */\
- MUX_VAL(CP(MCBSP2_FSX), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(MCBSP2_CLKX), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(MCBSP2_DR), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(MCBSP2_DX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- /*Expansion Card */\
- MUX_VAL(CP(MMC1_CLK), (OFF_OUT_PD | IDIS | PTU | EN | M0))\
- MUX_VAL(CP(MMC1_CMD), (OFF_IN_PD | IEN | PTU | EN | M0))\
- MUX_VAL(CP(MMC1_DAT0), (OFF_IN_PD | IEN | PTU | EN | M0))\
- MUX_VAL(CP(MMC1_DAT1), (OFF_IN_PD | IEN | PTU | EN | M0))\
- MUX_VAL(CP(MMC1_DAT2), (OFF_IN_PD | IEN | PTU | EN | M0))\
- MUX_VAL(CP(MMC1_DAT3), (OFF_IN_PD | IEN | PTU | EN | M0))\
- MUX_VAL(CP(MMC1_DAT4), (OFF_IN_PD | IEN | PTU | EN | M0))\
- MUX_VAL(CP(MMC1_DAT5), (OFF_IN_PD | IEN | PTU | EN | M0))\
- MUX_VAL(CP(MMC1_DAT6), (OFF_IN_PD | IEN | PTU | EN | M0))\
- MUX_VAL(CP(MMC1_DAT7), (OFF_IN_PD | IEN | PTU | EN | M0))\
- /*Wireless LAN */\
- MUX_VAL(CP(MMC2_CLK), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(MMC2_CMD), (OFF_IN_PD | IEN | PTU | EN | M0))\
- MUX_VAL(CP(MMC2_DAT0), (OFF_IN_PD | IEN | PTU | EN | M0))\
- MUX_VAL(CP(MMC2_DAT1), (OFF_IN_PD | IEN | PTU | EN | M0))\
- MUX_VAL(CP(MMC2_DAT2), (OFF_IN_PD | IEN | PTU | EN | M0))\
- MUX_VAL(CP(MMC2_DAT3), (OFF_IN_PD | IEN | PTU | EN | M0))\
- MUX_VAL(CP(MMC2_DAT4), (OFF_OUT_PD | IDIS | PTD | DIS | M1))/*DRD0*/\
- MUX_VAL(CP(MMC2_DAT5), (OFF_OUT_PD | IDIS | PTD | DIS | M1))/*DRD1*/\
- MUX_VAL(CP(MMC2_DAT6), (OFF_OUT_PD | IDIS | PTD | DIS | M1))/*DCMD*/\
- MUX_VAL(CP(MMC2_DAT7), (OFF_IN_PD | IEN | PTU | EN | M1))/*CLKIN*/\
- /*Bluetooth*/\
- MUX_VAL(CP(MCBSP3_DX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(MCBSP3_DR), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(MCBSP3_CLKX), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(MCBSP3_FSX), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(UART2_CTS), (OFF_IN_PD | IEN | PTU | EN | M0))\
- MUX_VAL(CP(UART2_RTS), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(UART2_TX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(UART2_RX), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- /*Modem Interface */\
- MUX_VAL(CP(UART1_TX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(UART1_RTS), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(UART1_CTS), (OFF_IN_PD | IEN | PTU | DIS | M0))\
- MUX_VAL(CP(UART1_RX), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(MCBSP4_CLKX), (OFF_IN_PD | IEN | PTD | DIS | M1))/*SSI1DRX*/\
- MUX_VAL(CP(MCBSP4_DR), (OFF_IN_PD | IEN | PTD | DIS | M1))/*SSI1FLGRX*/\
- MUX_VAL(CP(MCBSP4_DX), (OFF_IN_PD | IEN | PTD | DIS | M1))/*SSI1RDYRX*/\
- MUX_VAL(CP(MCBSP4_FSX), (OFF_IN_PD | IEN | PTD | DIS | M1))/*SSI1WAKE*/\
- MUX_VAL(CP(MCBSP1_CLKR), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(MCBSP1_FSR), (OFF_OUT_PD | IDIS | PTU | EN | M4))/*G157BWP*/\
- MUX_VAL(CP(MCBSP1_DX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(MCBSP1_DR), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(MCBSP_CLKS), (OFF_IN_PD | IEN | PTU | DIS | M0))\
- MUX_VAL(CP(MCBSP1_FSX), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(MCBSP1_CLKX), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- /*Serial Interface*/\
- MUX_VAL(CP(UART3_CTS_RCTX), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(UART3_RTS_SD), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(UART3_RX_IRRX), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(UART3_TX_IRTX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(HSUSB0_CLK), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(HSUSB0_STP), (OFF_OUT_PD | IDIS | PTU | EN | M0))\
- MUX_VAL(CP(HSUSB0_DIR), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(HSUSB0_NXT), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(HSUSB0_DATA0), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(HSUSB0_DATA1), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(HSUSB0_DATA2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(HSUSB0_DATA3), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(HSUSB0_DATA4), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(HSUSB0_DATA5), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(HSUSB0_DATA6), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(HSUSB0_DATA7), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- /* NOTE db: removed off-mode from I2C 1/2/3 ... external pullups!! */\
- MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0))\
- MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0))\
- MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0))\
- MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0))\
- MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0))\
- MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0))\
- MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0))\
- MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0))\
- MUX_VAL(CP(HDQ_SIO), (OFF_IN_PD | IEN | PTU | EN | M0))\
- MUX_VAL(CP(MCSPI1_CLK), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(MCSPI1_SIMO), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(MCSPI1_SOMI), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(MCSPI1_CS0), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(MCSPI1_CS1), (OFF_OUT_PD | IDIS | PTD | EN | M0))\
- MUX_VAL(CP(MCSPI1_CS2), (OFF_OUT_PD | IDIS | PTD | DIS | M4))/*G176*/\
- MUX_VAL(CP(MCSPI1_CS3), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(MCSPI2_CLK), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(MCSPI2_SIMO), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(MCSPI2_SOMI), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(MCSPI2_CS0), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(MCSPI2_CS1), (OFF_IN_PD | IEN | PTD | EN | M0))\
- /*Control and debug */\
- MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SYS_NIRQ), (OFF_IN_PD | IEN | PTU | EN | M0))\
- MUX_VAL(CP(SYS_BOOT0), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*G2PENIRQ*/\
- MUX_VAL(CP(SYS_BOOT1), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*GPIO_3 */\
- MUX_VAL(CP(SYS_BOOT2), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*G4MMC1WP*/\
- MUX_VAL(CP(SYS_BOOT3), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*G5LCDENV*/\
- MUX_VAL(CP(SYS_BOOT4), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*G6LANINT*/\
- MUX_VAL(CP(SYS_BOOT5), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*G7MMC2WP*/\
- MUX_VAL(CP(SYS_BOOT6), (OFF_OUT_PD | IDIS | PTD | DIS | M4))/*G8ENBKL*/\
- MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SYS_CLKOUT2), (OFF_IN_PD | IEN | PTU | EN | M4))/*GPIO_186*/\
- MUX_VAL(CP(JTAG_NTRST), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0))\
- MUX_VAL(CP(JTAG_EMU0), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(JTAG_EMU1), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(ETK_CLK_ES2), (OFF_OUT_PD | IDIS | PTU | EN | M0))\
- MUX_VAL(CP(ETK_CTL_ES2), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(ETK_D0_ES2), (OFF_IN_PD | IEN | PTD | DIS | M1))/*USB1TLD0*/\
- MUX_VAL(CP(ETK_D1_ES2), (OFF_IN_PD | IEN | PTD | DIS | M1))/*SPI3_CS0*/\
- MUX_VAL(CP(ETK_D2_ES2), (OFF_IN_PD | IEN | PTD | EN | M1))/*USB1TLD2*/\
- MUX_VAL(CP(ETK_D3_ES2), (OFF_IN_PD | IEN | PTD | DIS | M1))/*USB1TLD7*/\
- MUX_VAL(CP(ETK_D4_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(ETK_D5_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(ETK_D6_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(ETK_D7_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(ETK_D8_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(ETK_D9_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(ETK_D10_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(ETK_D11_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(ETK_D12_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(ETK_D13_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(ETK_D14_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(ETK_D15_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- /*Die to Die */\
- MUX_VAL(CP(D2D_MCAD0), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD1), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD2), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD3), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD4), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD5), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD6), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD7), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD8), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD9), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD10), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD11), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD12), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD13), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD14), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD15), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD16), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD17), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD18), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD19), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD20), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD21), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD22), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD23), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD24), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD25), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD26), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD27), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD28), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD29), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD30), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD31), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD32), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD33), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD34), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD35), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_MCAD36), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_CLK26MI), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(D2D_NRESPWRON), (OFF_OUT_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_NRESWARM), (OFF_IN_PD | IEN | PTU | EN | M0))\
- MUX_VAL(CP(D2D_ARM9NIRQ), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(D2D_UMA2P6FIQ), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(D2D_SPINT), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_FRINT), (OFF_IN_PD | IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_DMAREQ0), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(D2D_DMAREQ1), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(D2D_DMAREQ2), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(D2D_DMAREQ3), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(D2D_N3GTRST), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(D2D_N3GTDI), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(D2D_N3GTDO), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(D2D_N3GTMS), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(D2D_N3GTCK), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(D2D_N3GRTCK), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(D2D_MSTDBY), (OFF_IN_PD | IEN | PTU | EN | M0))\
- MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0))\
- MUX_VAL(CP(D2D_IDLEREQ), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(D2D_IDLEACK), (OFF_IN_PD | IEN | PTU | EN | M0))\
- MUX_VAL(CP(D2D_MWRITE), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(D2D_SWRITE), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(D2D_MREAD), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(D2D_SREAD), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(D2D_MBUSFLAG), (OFF_IN_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(D2D_SBUSFLAG), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
- MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0))\
- MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)) /*SDRC_CKE1 NOT USED*/
-
-/*
- * GPMC Timing definitions for SDP3430
- * at L3 = 166Mhz
- */
-
-/* Timing definitions for GPMC controller for Sibley NOR */
-#define SDP3430_NOR_GPMC_CONF1 0x00001200
-#define SDP3430_NOR_GPMC_CONF2 0x001F1F00
-#define SDP3430_NOR_GPMC_CONF3 0x00080802
-#define SDP3430_NOR_GPMC_CONF4 0x1C091C09
-#define SDP3430_NOR_GPMC_CONF5 0x01131F1F
-#define SDP3430_NOR_GPMC_CONF6 0x1F0F03C2
-
-/*
- * Timing definitions for GPMC controller for Debug Board
- * Debug board contains access to ethernet and DIP Switch setting
- * information etc.
- */
-#define SDP3430_DEBUG_GPMC_CONF1 0x00611200
-#define SDP3430_DEBUG_GPMC_CONF2 0x001F1F01
-#define SDP3430_DEBUG_GPMC_CONF3 0x00080803
-#define SDP3430_DEBUG_GPMC_CONF4 0x1D091D09
-#define SDP3430_DEBUG_GPMC_CONF5 0x041D1F1F
-#define SDP3430_DEBUG_GPMC_CONF6 0x1D0904C4
-
-/* Timing defintions for GPMC OneNAND */
-#define SDP3430_ONENAND_GPMC_CONF1 0x00001200
-#define SDP3430_ONENAND_GPMC_CONF2 0x000F0F01
-#define SDP3430_ONENAND_GPMC_CONF3 0x00030301
-#define SDP3430_ONENAND_GPMC_CONF4 0x0F040F04
-#define SDP3430_ONENAND_GPMC_CONF5 0x010F1010
-#define SDP3430_ONENAND_GPMC_CONF6 0x1F060000
-
-/* GPMC definitions for GPMC NAND */
-#define SDP3430_NAND_GPMC_CONF1 0x00000800
-#define SDP3430_NAND_GPMC_CONF2 0x00141400
-#define SDP3430_NAND_GPMC_CONF3 0x00141400
-#define SDP3430_NAND_GPMC_CONF4 0x0F010F01
-#define SDP3430_NAND_GPMC_CONF5 0x010C1414
-#define SDP3430_NAND_GPMC_CONF6 0x1F040A80
-
-#endif /* _BOARD_SDP_H_ */
+++ /dev/null
-/*
- * (C) Copyright 2006-2009
- * Texas Instruments Incorporated.
- * Richard Woodruff <r-woodruff2@ti.com>
- * Syed Mohammed Khasim <x0khasim@ti.com>
- * Nishanth Menon <nm@ti.com>
- *
- * Configuration settings for the 3430 TI SDP3430 board.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* TODO: REMOVE THE FOLLOWING
- * Retained the following till size.h is removed in u-boot
- */
-#include <linux/sizes.h>
-/*
- * High Level Configuration Options
- */
-#define CONFIG_OMAP 1 /* in a TI OMAP core */
-#define CONFIG_OMAP3_3430SDP 1 /* working with SDP Rev2 */
-#define CONFIG_OMAP_COMMON
-/* Common ARM Erratas */
-#define CONFIG_ARM_ERRATA_454179
-#define CONFIG_ARM_ERRATA_430973
-#define CONFIG_ARM_ERRATA_621766
-
-#define CONFIG_SDRC /* The chip has SDRC controller */
-
-#include <asm/arch/cpu.h> /* get chip and board defs */
-#include <asm/arch/omap.h>
-
-/*
- * NOTE: these #defines presume standard SDP jumper settings.
- * In particular:
- * - 26 MHz clock (not 19.2 or 38.4 MHz)
- * - Boot from 128MB NOR, not NAND or OneNAND
- *
- * At this writing, OMAP3 U-Boot support doesn't permit concurrent
- * support for all the flash types the board supports.
- */
-#define CONFIG_DISPLAY_CPUINFO 1
-#define CONFIG_DISPLAY_BOARDINFO 1
-
-/* Clock Defines */
-#define V_OSCK 26000000 /* Clock output from T2 */
-#define V_SCLK (V_OSCK >> 1)
-
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-#define CONFIG_REVISION_TAG 1
-
-#define CONFIG_OF_LIBFDT 1
-
-/*
- * Size of malloc() pool
- * Total Size Environment - 256k
- * Malloc - add 256k
- */
-#define CONFIG_ENV_SIZE (256 << 10)
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10))
-
-/*--------------------------------------------------------------------------*/
-
-/*
- * Hardware drivers
- */
-
-/*
- * TWL4030
- */
-#define CONFIG_TWL4030_POWER 1
-
-/*
- * serial port - NS16550 compatible
- */
-#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
-
-/* Original SDP u-boot used UART1 and thus J8 (innermost); that can be
- * swapped with UART2 via jumpering. Downsides of using J8: it doesn't
- * support UART boot (that's only for UART3); it prevents sharing a Linux
- * kernel (LL_DEBUG_UART3) or filesystem (getty ttyS2) with most boards.
- *
- * UART boot uses UART3 on J9, and the SDP user's guide says to use
- * that for console. Downsides of using J9: you can't use IRDA too;
- * since UART3 isn't in the CORE power domain, it may be a bit less
- * usable in certain PM-sensitive debug scenarios.
- */
-#undef CONSOLE_J9 /* else J8/UART1 (innermost) */
-
-#ifdef CONSOLE_J9
-#define CONFIG_CONS_INDEX 3
-#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
-#define CONFIG_SERIAL3 3 /* UART3 */
-#else
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
-#define CONFIG_SERIAL1 1 /* UART1 */
-#endif
-
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
- 115200}
-
-/*
- * I2C for power management setup
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
-#define CONFIG_SYS_I2C_OMAP34XX
-
-/* OMITTED: single 1 Gbit MT29F1G NAND flash */
-
-/*
- * NOR boot support - single 1 Gbit PF48F6000M0 Strataflash
- */
-#define CONFIG_SYS_FLASH_BASE 0x10000000
-#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
-#define CONFIG_SYS_FLASH_CFI 1 /* use CFI geometry data */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* ~10x faster writes */
-#define CONFIG_SYS_FLASH_PROTECTION 1 /* hardware sector protection */
-#define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* flinfo 'E' for empty */
-#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */
-
-#define CONFIG_SYS_FLASH_CFI_WIDTH 2
-#define PHYS_FLASH_SIZE (128 << 20)
-#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max sectors on one chip */
-
-/* OMITTED: single 2 Gbit KFM2G16 OneNAND flash */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_SYS_ENV_SECT_SIZE (256 << 10)
-#define CONFIG_ENV_OFFSET CONFIG_SYS_ENV_SECT_SIZE
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_ENV_SECT_SIZE)
-/*--------------------------------------------------------------------------*/
-
-/* Enabled commands */
-#define CONFIG_CMD_DHCP /* DHCP Support */
-#define CONFIG_CMD_EXT2 /* EXT2 Support */
-#define CONFIG_CMD_FAT /* FAT support */
-#define CONFIG_CMD_I2C /* I2C serial bus support */
-#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
-#define CONFIG_CMD_MMC /* MMC support */
-
-/*--------------------------------------------------------------------------*/
-/*
- * MMC boot support
- */
-
-#if defined(CONFIG_CMD_MMC)
-#define CONFIG_GENERIC_MMC 1
-#define CONFIG_MMC 1
-#define CONFIG_OMAP_HSMMC 1
-#define CONFIG_DOS_PARTITION 1
-#endif
-
-/*----------------------------------------------------------------------------
- * SMSC9115 Ethernet from SMSC9118 family
- *----------------------------------------------------------------------------
- */
-#if defined(CONFIG_CMD_NET)
-
-#define CONFIG_LAN91C96
-#define CONFIG_LAN91C96_BASE DEBUG_BASE
-#define CONFIG_LAN91C96_EXT_PHY
-
-#define CONFIG_BOOTP_SEND_HOSTNAME
-/*
- * BOOTP fields
- */
-#define CONFIG_BOOTP_SUBNETMASK 0x00000001
-#define CONFIG_BOOTP_GATEWAY 0x00000002
-#define CONFIG_BOOTP_HOSTNAME 0x00000004
-#define CONFIG_BOOTP_BOOTPATH 0x00000010
-#endif /* (CONFIG_CMD_NET) */
-
-/*
- * Environment setup
- *
- * Default boot order: mmc bootscript, MMC uImage, NOR image.
- * Network booting environment must be configured at site.
- */
-
-/* allow overwriting serial config and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "loadaddr=0x82000000\0" \
- "console=ttyS0,115200n8\0" \
- "mmcargs=setenv bootargs console=${console} " \
- "root=/dev/mmcblk0p2 rw " \
- "rootfstype=ext3 rootwait\0" \
- "norargs=setenv bootargs console=${console} " \
- "root=/dev/mtdblock3 rw " \
- "rootfstype=jffs2\0" \
- "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
- "bootscript=echo Running bootscript from MMC/SD ...; " \
- "autoscr ${loadaddr}\0" \
- "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
- "mmcboot=echo Booting from MMC/SD ...; " \
- "run mmcargs; " \
- "bootm ${loadaddr}\0" \
- "norboot=echo Booting from NOR ...; " \
- "run norargs; " \
- "bootm 0x80000\0" \
-
-#define CONFIG_BOOTCOMMAND \
- "if mmcinit; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loaduimage; then " \
- "run mmcboot; " \
- "else run norboot; " \
- "fi; " \
- "fi; " \
- "else run norboot; fi"
-
-#define CONFIG_AUTO_COMPLETE 1
-
-/*--------------------------------------------------------------------------*/
-
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
-
-/* SDRAM Test range - start at 16 meg boundary -ends at 32Meg -
- * a basic sanity check ONLY
- * IF you would like to increase coverage, increase the end address
- * or run the test with custom options
- */
-#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x01000000)
-#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + (32 << 20))
-
-/* Default load address */
-#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0)
-
-/*--------------------------------------------------------------------------*/
-
-/*
- * 3430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by
- * 32KHz clk, or from external sig. This rate is divided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
-#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE 0x800
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-/*
- * SDRAM Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
-#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
-
-/*--------------------------------------------------------------------------*/
-
-/*
- * NOR FLASH usage ... default nCS0:
- * - one 256KB sector for U-Boot
- * - one 256KB sector for its parameters (not all used)
- * - eight sectors (2 MB) for kernel
- * - rest for JFFS2
- */
-
-/* Monitor at start of flash */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN (256 << 10)
-
-/*
- * NAND FLASH usage ... default nCS1:
- * - four 128KB sectors for X-Loader
- * - four 128KB sectors for U-Boot
- * - two 128KB sector for its parameters
- * - 32 sectors (4 MB) for kernel
- * - rest for filesystem
- */
-
-/*
- * OneNAND FLASH usage ... default nCS2:
- * - four 128KB sectors for X-Loader
- * - two 128KB sectors for U-Boot
- * - one 128KB sector for its parameters
- * - sixteen sectors (2 MB) for kernel
- * - rest for filesystem
- */
-
-#define CONFIG_SYS_CACHELINE_SIZE 64
-
-#endif /* __CONFIG_H */
projects / u-boot.git / commitdiff
