serial: stm32: BRR must be set only when usart is disable

To avoid spurious chars, BRR register must only be written when
USART is disabled.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>

diff --git a/drivers/serial/serial_stm32.c b/drivers/serial/serial_stm32.c
index 93f70947eec341038f2efd5588aa9d4f5ecb527e..0085113f6746a4cfc2977bc07458dbeb91d50e12 100644 (file)
--- a/drivers/serial/serial_stm32.c
+++ b/drivers/serial/serial_stm32.c
@@ -29,6 +29,10 @@ static void _stm32_serial_setbrg(fdt_addr_t base,
 {
        bool stm32f4 = uart_info->stm32f4;
        u32 int_div, mantissa, fraction, oversampling;
+       u8 uart_enable_bit = uart_info->uart_enable_bit;
+
+       /* BRR register must be set when uart is disabled */
+       clrbits_le32(base + CR1_OFFSET(stm32f4), BIT(uart_enable_bit));
 
        int_div = DIV_ROUND_CLOSEST(clock_rate, baudrate);
 
@@ -44,6 +48,8 @@ static void _stm32_serial_setbrg(fdt_addr_t base,
        fraction = int_div % oversampling;
 
        writel(mantissa | fraction, base + BRR_OFFSET(stm32f4));
+
+       setbits_le32(base + CR1_OFFSET(stm32f4), BIT(uart_enable_bit));
 }
 
 static int stm32_serial_setbrg(struct udevice *dev, int baudrate)