board: sl28: drop unneeded and outdated flash partitions

This board doesn't use the MTD subsystem in u-boot, thus there is no
need to specify the partitions. They are outdated anyway. Just drop
them.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>

diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28.dts b/arch/arm/dts/fsl-ls1028a-kontron-sl28.dts
index ea77a83d2fea3fe60cafa915b687aca9abfe4dbe..7f237c39ec0cf24eb5963b2fa249782015b1adaf 100644 (file)
--- a/arch/arm/dts/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28.dts
@@ -72,61 +72,6 @@
                /* The following setting enables 1-1-2 (CMD-ADDR-DATA) mode */
                spi-rx-bus-width = <2>; /* 2 SPI Rx lines */
                spi-tx-bus-width = <1>; /* 1 SPI Tx line */
-
-               partition@0 {
-                       reg = <0x000000 0x010000>;
-                       label = "rcw";
-                       read-only;
-               };
-
-               partition@10000 {
-                       reg = <0x010000 0x0f0000>;
-                       label = "failsafe bootloader";
-                       read-only;
-               };
-
-               partition@100000 {
-                       reg = <0x100000 0x040000>;
-                       label = "failsafe DP firmware";
-                       read-only;
-               };
-
-               partition@140000 {
-                       reg = <0x140000 0x0a0000>;
-                       label = "failsafe trusted firmware";
-                       read-only;
-               };
-
-               partition@1e0000 {
-                       reg = <0x1e0000 0x020000>;
-                       label = "reserved";
-                       read-only;
-               };
-
-               partition@200000 {
-                       reg = <0x200000 0x010000>;
-                       label = "configuration store";
-               };
-
-               partition@210000 {
-                       reg = <0x210000 0x0f0000>;
-                       label = "bootloader";
-               };
-
-               partition@300000 {
-                       reg = <0x300000 0x040000>;
-                       label = "DP firmware";
-               };
-
-               partition@340000 {
-                       reg = <0x340000 0x0a0000>;
-                       label = "trusted firmware";
-               };
-
-               partition@3e0000 {
-                       reg = <0x3e0000 0x020000>;
-                       label = "bootloader environment";
-               };
        };
 };