board: sama5d3_xplained: Clean up code

Due to the introduction of the pinctrl and clk driver, and using
device tree files, remove the unneeded hardcoded pin configuration
and clock enabling code from the board file.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>

diff --git a/board/atmel/sama5d3_xplained/sama5d3_xplained.c b/board/atmel/sama5d3_xplained/sama5d3_xplained.c
index 4c339a09ee4d9e4e38bc21992af77b8b31afecd1..15845ef2e7959b8a27f8746b4ba425607e1391a3 100644 (file)
--- a/board/atmel/sama5d3_xplained/sama5d3_xplained.c
+++ b/board/atmel/sama5d3_xplained/sama5d3_xplained.c
@@ -6,16 +6,12 @@
  */
 
 #include <common.h>
-#include <mmc.h>
 #include <asm/io.h>
 #include <asm/arch/sama5d3_smc.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_rstc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/clk.h>
-#include <atmel_mci.h>
-#include <net.h>
-#include <netdev.h>
 #include <spl.h>
 #include <asm/arch/atmel_mpddrc.h>
 #include <asm/arch/at91_wdt.h>
@@ -65,20 +61,12 @@ static void sama5d3_xplained_usb_hw_init(void)
 #ifdef CONFIG_GENERIC_ATMEL_MCI
 static void sama5d3_xplained_mci0_hw_init(void)
 {
-       at91_mci_hw_init();
-
        at91_set_pio_output(AT91_PIO_PORTE, 2, 0);      /* MCI0 Power */
 }
 #endif
 
 int board_early_init_f(void)
 {
-       at91_periph_clk_enable(ATMEL_ID_PIOA);
-       at91_periph_clk_enable(ATMEL_ID_PIOB);
-       at91_periph_clk_enable(ATMEL_ID_PIOC);
-       at91_periph_clk_enable(ATMEL_ID_PIOD);
-       at91_periph_clk_enable(ATMEL_ID_PIOE);
-
        at91_seriald_hw_init();
 
        return 0;
@@ -97,10 +85,6 @@ int board_init(void)
 #endif
 #ifdef CONFIG_GENERIC_ATMEL_MCI
        sama5d3_xplained_mci0_hw_init();
-#endif
-#ifdef CONFIG_MACB
-       at91_gmac_hw_init();
-       at91_macb_hw_init();
 #endif
        return 0;
 }
@@ -113,24 +97,6 @@ int dram_init(void)
        return 0;
 }
 
-int board_eth_init(bd_t *bis)
-{
-#ifdef CONFIG_MACB
-       macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC, 0x00);
-       macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00);
-#endif
-       return 0;
-}
-
-#ifdef CONFIG_GENERIC_ATMEL_MCI
-int board_mmc_init(bd_t *bis)
-{
-       atmel_mci_init((void *)ATMEL_BASE_MCI0);
-
-       return 0;
-}
-#endif
-
 /* SPL */
 #ifdef CONFIG_SPL_BUILD
 void spl_board_init(void)