]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
usb: musb-new: Add support for DM_USB
authorJean-Jacques Hiblot <jjhiblot@ti.com>
Tue, 4 Dec 2018 10:30:57 +0000 (11:30 +0100)
committerMarek Vasut <marex@denx.de>
Fri, 14 Dec 2018 16:59:10 +0000 (17:59 +0100)
Enable DM for USB peripheral in the musb-new driver.
Also make sure that the driver can be used in the SPL.
This implies that:
* the driver must work with and without the OF_CONTROL option. That
in turn, implies that the platform data can be passed in a struct
ti_musb_platdata or be read from the dtb
* usb.o is linked in the SPL if host support is enabled

Another change is that the driver does not fail to bind (and stop the boot
process) if one of the child driver does not bind. Reporting the error is
enough. This kind of error would appear if the port is configured in the
DTS but the driver is not activated in the config.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
arch/arm/include/asm/omap_musb.h
common/Makefile
drivers/usb/musb-new/musb_gadget.c
drivers/usb/musb-new/musb_uboot.c
drivers/usb/musb-new/ti-musb.c

index 875f1002af88a5f8dbb2f1a86c6657bac3e3ef62..b40ea005bec2bd20d877895b89d156bd13b8f2a6 100644 (file)
@@ -7,6 +7,7 @@
 
 #ifndef __ASM_ARM_OMAP_MUSB_H
 #define __ASM_ARM_OMAP_MUSB_H
+#include <linux/usb/musb.h>
 
 extern struct musb_platform_ops musb_dsps_ops;
 extern const struct musb_platform_ops am35x_ops;
@@ -21,4 +22,11 @@ struct omap_musb_board_data {
 };
 
 enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
+
+struct ti_musb_platdata {
+       void *base;
+       void *ctrl_mod_base;
+       struct musb_hdrc_platform_data plat;
+};
+
 #endif /* __ASM_ARM_OMAP_MUSB_H */
index 65d89dc62d5e0a1aa294406c17871eef2530c8cf..0de60b3ced2c626d737791af326f286719c67c2a 100644 (file)
@@ -74,9 +74,12 @@ obj-$(CONFIG_SPL_YMODEM_SUPPORT) += xyzModem.o
 obj-$(CONFIG_SPL_LOAD_FIT) += common_fit.o
 obj-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o
 obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o
+
 ifdef CONFIG_SPL_USB_HOST_SUPPORT
 obj-$(CONFIG_SPL_USB_SUPPORT) += usb.o usb_hub.o
 obj-$(CONFIG_USB_STORAGE) += usb_storage.o
+else
+obj-$(CONFIG_USB_MUSB_HOST) += usb.o
 endif
 endif # CONFIG_SPL_BUILD
 
index 8b6cec192fb98a92bae6a17a1aced4712a77b917..b35d33ffedf444d177f5bff915fc4e6ae6e6b555 100644 (file)
@@ -1775,6 +1775,14 @@ static int musb_gadget_start(struct usb_gadget *g,
                struct usb_gadget_driver *driver);
 static int musb_gadget_stop(struct usb_gadget *g,
                struct usb_gadget_driver *driver);
+#else
+static int musb_gadget_stop(struct usb_gadget *g)
+{
+       struct musb     *musb = gadget_to_musb(g);
+
+       musb_stop(musb);
+       return 0;
+}
 #endif
 
 static const struct usb_gadget_ops musb_gadget_operations = {
@@ -1787,6 +1795,9 @@ static const struct usb_gadget_ops musb_gadget_operations = {
 #ifndef __UBOOT__
        .udc_start              = musb_gadget_start,
        .udc_stop               = musb_gadget_stop,
+#else
+       .udc_start              = musb_gadget_start,
+       .udc_stop               = musb_gadget_stop,
 #endif
 };
 
index d40772b1aa5c479c9570833cca10a44fa549c9a1..9c8cc6e584439850310ee126c268346cadcbc613 100644 (file)
@@ -367,7 +367,7 @@ struct dm_usb_ops musb_usb_ops = {
 #endif /* CONFIG_IS_ENABLED(DM_USB) */
 #endif /* CONFIG_USB_MUSB_HOST */
 
-#ifdef CONFIG_USB_MUSB_GADGET
+#if defined(CONFIG_USB_MUSB_GADGET) && !CONFIG_IS_ENABLED(DM_USB_GADGET)
 static struct musb *gadget;
 
 int usb_gadget_handle_interrupts(int index)
@@ -430,7 +430,7 @@ struct musb *musb_register(struct musb_hdrc_platform_data *plat, void *bdata,
                musbp = &musb_host.host;
                break;
 #endif
-#ifdef CONFIG_USB_MUSB_GADGET
+#if defined(CONFIG_USB_MUSB_GADGET) && !CONFIG_IS_ENABLED(DM_USB_GADGET)
        case MUSB_PERIPHERAL:
                musbp = &gadget;
                break;
index ee0960704a00a3adfd41d816b88c2a8a90551036..20ca2731b49a8dc50a8bae944f79839a582ddd70 100644 (file)
 DECLARE_GLOBAL_DATA_PTR;
 
 #if CONFIG_IS_ENABLED(DM_USB)
-
 /* USB 2.0 PHY Control */
 #define CM_PHY_PWRDN                   (1 << 0)
 #define CM_PHY_OTG_PWRDN               (1 << 1)
 #define OTGVDET_EN                     (1 << 19)
 #define OTGSESSENDEN                   (1 << 20)
 
+#define AM335X_USB0_CTRL       0x0
 #define AM335X_USB1_CTRL       0x8
 
-struct ti_musb_platdata {
-       void *base;
-       void *ctrl_mod_base;
-       struct musb_hdrc_platform_data plat;
-       struct musb_hdrc_config musb_config;
-       struct omap_musb_board_data otg_board_data;
-};
+static void ti_musb_set_phy_power(struct udevice *dev, u8 on)
+{
+       struct ti_musb_platdata *platdata = dev_get_platdata(dev);
+
+       if (!platdata->ctrl_mod_base)
+               return;
+
+       if (on) {
+               clrsetbits_le32(platdata->ctrl_mod_base,
+                               CM_PHY_PWRDN | CM_PHY_OTG_PWRDN,
+                               OTGVDET_EN | OTGSESSENDEN);
+       } else {
+               clrsetbits_le32(platdata->ctrl_mod_base, 0,
+                               CM_PHY_PWRDN | CM_PHY_OTG_PWRDN);
+       }
+}
+
+#if CONFIG_IS_ENABLED(OF_CONTROL)
 
 static int ti_musb_get_usb_index(int node)
 {
@@ -64,20 +75,6 @@ static int ti_musb_get_usb_index(int node)
        return -ENOENT;
 }
 
-static void ti_musb_set_phy_power(struct udevice *dev, u8 on)
-{
-       struct ti_musb_platdata *platdata = dev_get_platdata(dev);
-
-       if (on) {
-               clrsetbits_le32(platdata->ctrl_mod_base,
-                               CM_PHY_PWRDN | CM_PHY_OTG_PWRDN,
-                               OTGVDET_EN | OTGSESSENDEN);
-       } else {
-               clrsetbits_le32(platdata->ctrl_mod_base, 0,
-                               CM_PHY_PWRDN | CM_PHY_OTG_PWRDN);
-       }
-}
-
 static int ti_musb_ofdata_to_platdata(struct udevice *dev)
 {
        struct ti_musb_platdata *platdata = dev_get_platdata(dev);
@@ -86,6 +83,7 @@ static int ti_musb_ofdata_to_platdata(struct udevice *dev)
        int phys;
        int ctrl_mod;
        int usb_index;
+       struct musb_hdrc_config *musb_config;
 
        platdata->base = (void *)devfdt_get_addr_index(dev, 1);
 
@@ -96,38 +94,41 @@ static int ti_musb_ofdata_to_platdata(struct udevice *dev)
        switch (usb_index) {
        case 1:
                platdata->ctrl_mod_base += AM335X_USB1_CTRL;
+               break;
        case 0:
+               platdata->ctrl_mod_base += AM335X_USB0_CTRL;
+               break;
        default:
                break;
        }
 
-       platdata->musb_config.multipoint = fdtdec_get_int(fdt, node,
-                                                         "mentor,multipoint",
-                                                         -1);
-       if (platdata->musb_config.multipoint < 0) {
+       musb_config = malloc(sizeof(struct musb_hdrc_config));
+       memset(musb_config, 0, sizeof(struct musb_hdrc_config));
+
+       musb_config->multipoint = fdtdec_get_int(fdt, node,
+                                                "mentor,multipoint", -1);
+       if (musb_config->multipoint < 0) {
                pr_err("MUSB multipoint DT entry missing\n");
                return -ENOENT;
        }
 
-       platdata->musb_config.dyn_fifo = 1;
+       musb_config->dyn_fifo = 1;
 
-       platdata->musb_config.num_eps = fdtdec_get_int(fdt, node,
-                                                      "mentor,num-eps", -1);
-       if (platdata->musb_config.num_eps < 0) {
+       musb_config->num_eps = fdtdec_get_int(fdt, node, "mentor,num-eps",
+                                             -1);
+       if (musb_config->num_eps < 0) {
                pr_err("MUSB num-eps DT entry missing\n");
                return -ENOENT;
        }
 
-       platdata->musb_config.ram_bits = fdtdec_get_int(fdt, node,
-                                                       "mentor,ram-bits", -1);
-       if (platdata->musb_config.ram_bits < 0) {
+       musb_config->ram_bits = fdtdec_get_int(fdt, node, "mentor,ram-bits",
+                                              -1);
+       if (musb_config->ram_bits < 0) {
                pr_err("MUSB ram-bits DT entry missing\n");
                return -ENOENT;
        }
 
-       platdata->otg_board_data.set_phy_power = ti_musb_set_phy_power;
-       platdata->otg_board_data.dev = dev;
-       platdata->plat.config = &platdata->musb_config;
+       platdata->plat.config = musb_config;
 
        platdata->plat.power = fdtdec_get_int(fdt, node, "mentor,power", -1);
        if (platdata->plat.power < 0) {
@@ -136,29 +137,27 @@ static int ti_musb_ofdata_to_platdata(struct udevice *dev)
        }
 
        platdata->plat.platform_ops = &musb_dsps_ops;
-       platdata->plat.board_data = &platdata->otg_board_data;
 
        return 0;
 }
+#endif
 
 static int ti_musb_host_probe(struct udevice *dev)
 {
        struct musb_host_data *host = dev_get_priv(dev);
        struct ti_musb_platdata *platdata = dev_get_platdata(dev);
        struct usb_bus_priv *priv = dev_get_uclass_priv(dev);
-       struct omap_musb_board_data *otg_board_data;
        int ret;
 
        priv->desc_before_addr = true;
 
-       otg_board_data = &platdata->otg_board_data;
-
        host->host = musb_init_controller(&platdata->plat,
-                                         (struct device *)otg_board_data,
+                                         NULL,
                                          platdata->base);
        if (!host->host)
                return -EIO;
 
+       ti_musb_set_phy_power(dev, 1);
        ret = musb_lowlevel_init(host);
 
        return ret;
@@ -169,10 +168,12 @@ static int ti_musb_host_remove(struct udevice *dev)
        struct musb_host_data *host = dev_get_priv(dev);
 
        musb_stop(host->host);
+       ti_musb_set_phy_power(dev, 0);
 
        return 0;
 }
 
+#if CONFIG_IS_ENABLED(OF_CONTROL)
 static int ti_musb_host_ofdata_to_platdata(struct udevice *dev)
 {
        struct ti_musb_platdata *platdata = dev_get_platdata(dev);
@@ -190,11 +191,14 @@ static int ti_musb_host_ofdata_to_platdata(struct udevice *dev)
 
        return 0;
 }
+#endif
 
 U_BOOT_DRIVER(ti_musb_host) = {
        .name   = "ti-musb-host",
        .id     = UCLASS_USB,
+#if CONFIG_IS_ENABLED(OF_CONTROL)
        .ofdata_to_platdata = ti_musb_host_ofdata_to_platdata,
+#endif
        .probe = ti_musb_host_probe,
        .remove = ti_musb_host_remove,
        .ops    = &musb_usb_ops,
@@ -202,6 +206,82 @@ U_BOOT_DRIVER(ti_musb_host) = {
        .priv_auto_alloc_size = sizeof(struct musb_host_data),
 };
 
+#if CONFIG_IS_ENABLED(DM_USB_GADGET)
+struct ti_musb_peripheral {
+       struct musb *periph;
+};
+
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+static int ti_musb_peripheral_ofdata_to_platdata(struct udevice *dev)
+{
+       struct ti_musb_platdata *platdata = dev_get_platdata(dev);
+       const void *fdt = gd->fdt_blob;
+       int node = dev_of_offset(dev);
+       int ret;
+
+       ret = ti_musb_ofdata_to_platdata(dev);
+       if (ret) {
+               pr_err("platdata dt parse error\n");
+               return ret;
+       }
+       platdata->plat.mode = MUSB_PERIPHERAL;
+
+       return 0;
+}
+#endif
+
+int dm_usb_gadget_handle_interrupts(struct udevice *dev)
+{
+       struct ti_musb_peripheral *priv = dev_get_priv(dev);
+
+       priv->periph->isr(0, priv->periph);
+
+       return 0;
+}
+
+static int ti_musb_peripheral_probe(struct udevice *dev)
+{
+       struct ti_musb_peripheral *priv = dev_get_priv(dev);
+       struct ti_musb_platdata *platdata = dev_get_platdata(dev);
+       int ret;
+
+       priv->periph = musb_init_controller(&platdata->plat,
+                                           NULL,
+                                           platdata->base);
+       if (!priv->periph)
+               return -EIO;
+
+       ti_musb_set_phy_power(dev, 1);
+       musb_gadget_setup(priv->periph);
+       return usb_add_gadget_udc((struct device *)dev, &priv->periph->g);
+}
+
+static int ti_musb_peripheral_remove(struct udevice *dev)
+{
+       struct ti_musb_peripheral *priv = dev_get_priv(dev);
+
+       usb_del_gadget_udc(&priv->periph->g);
+       ti_musb_set_phy_power(dev, 0);
+
+       return 0;
+}
+
+U_BOOT_DRIVER(ti_musb_peripheral) = {
+       .name   = "ti-musb-peripheral",
+       .id     = UCLASS_USB_GADGET_GENERIC,
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+       .ofdata_to_platdata = ti_musb_peripheral_ofdata_to_platdata,
+#endif
+       .probe = ti_musb_peripheral_probe,
+       .remove = ti_musb_peripheral_remove,
+       .ops    = &musb_usb_ops,
+       .platdata_auto_alloc_size = sizeof(struct ti_musb_platdata),
+       .priv_auto_alloc_size = sizeof(struct ti_musb_peripheral),
+       .flags = DM_FLAG_PRE_RELOC,
+};
+#endif
+
+#if CONFIG_IS_ENABLED(OF_CONTROL)
 static int ti_musb_wrapper_bind(struct udevice *parent)
 {
        const void *fdt = gd->fdt_blob;
@@ -222,15 +302,23 @@ static int ti_musb_wrapper_bind(struct udevice *parent)
                switch (dr_mode) {
                case USB_DR_MODE_PERIPHERAL:
                        /* Bind MUSB device */
+                       ret = device_bind_driver_to_node(parent,
+                                                        "ti-musb-peripheral",
+                                                        name,
+                                                        offset_to_ofnode(node),
+                                                        &dev);
+                       if (ret)
+                               pr_err("musb - not able to bind usb peripheral node\n");
                        break;
                case USB_DR_MODE_HOST:
                        /* Bind MUSB host */
-                       ret = device_bind_driver_to_node(parent, "ti-musb-host",
-                                       name, offset_to_ofnode(node), &dev);
-                       if (ret) {
+                       ret = device_bind_driver_to_node(parent,
+                                                        "ti-musb-host",
+                                                        name,
+                                                        offset_to_ofnode(node),
+                                                        &dev);
+                       if (ret)
                                pr_err("musb - not able to bind usb host node\n");
-                               return ret;
-                       }
                        break;
                default:
                        break;
@@ -250,5 +338,6 @@ U_BOOT_DRIVER(ti_musb_wrapper) = {
        .of_match = ti_musb_ids,
        .bind = ti_musb_wrapper_bind,
 };
+#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
 
 #endif /* CONFIG_IS_ENABLED(DM_USB) */