imx: ddr: imx8m: Move selfref_en after DDR scrub

When doing DDR scrub, the DDR may enter into self refresh if the
selfref_en is enabled before DDR scrub. This will cause scrub
can't complete that SBRSTAT.scrub_done won't be set.

Since the selfref_en can be programmed during the course of
normal operation, move it after DDR scrub

Signed-off-by: Ye Li <ye.li@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>

diff --git a/drivers/ddr/imx/imx8m/ddr_init.c b/drivers/ddr/imx/imx8m/ddr_init.c
index 99a67edfb0a8fc0aa89058bd476007af9395cab2..b70bcc383fa7d57a4b5151e5201e416c99278b62 100644 (file)
--- a/drivers/ddr/imx/imx8m/ddr_init.c
+++ b/drivers/ddr/imx/imx8m/ddr_init.c
@@ -235,8 +235,6 @@ int ddr_init(struct dram_timing_info *dram_timing)
 
        /* Step26: Set back register in Step4 to the original values if desired */
        reg32_write(DDRC_RFSHCTL3(0), 0x0000000);
-       /* enable selfref_en by default */
-       setbits_le32(DDRC_PWRCTL(0), 0x1);
 
        /* enable port 0 */
        reg32_write(DDRC_PCTRL_0(0), 0x00000001);
@@ -244,6 +242,9 @@ int ddr_init(struct dram_timing_info *dram_timing)
 
        board_dram_ecc_scrub();
 
+       /* enable selfref_en by default */
+       setbits_le32(DDRC_PWRCTL(0), 0x1);
+
        /* save the dram timing config into memory */
        dram_config_save(dram_timing, CONFIG_SAVED_DRAM_TIMING_BASE);