Use common devspeed and armspeed definitions.
Also fix reading efuse bootrom register.
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[DDR3_PLL] = {KS2_DDR3APLLCTL0, KS2_DDR3APLLCTL1},
};
-int dev_speeds[] = {
- SPD800,
- SPD850,
- SPD1000,
- SPD1250,
- SPD1350,
- SPD1400,
- SPD1500,
- SPD1400,
- SPD1350,
- SPD1250,
- SPD1000,
- SPD850,
- SPD800
-};
-
/**
* pll_freq_get - get pll frequency
* Fout = Fref * NF(mult) / NR(prediv) / OD
[DDR3B_PLL] = {KS2_DDR3BPLLCTL0, KS2_DDR3BPLLCTL1},
};
-int dev_speeds[] = {
- SPD800,
- SPD1000,
- SPD1200,
- SPD800,
- SPD800,
- SPD800,
- SPD800,
- SPD800,
- SPD1200,
- SPD1000,
- SPD800,
- SPD800,
- SPD800,
-};
-
-int arm_speeds[] = {
- SPD800,
- SPD1000,
- SPD1200,
- SPD1350,
- SPD1400,
- SPD800,
- SPD1400,
- SPD1350,
- SPD1200,
- SPD1000,
- SPD800,
- SPD800,
- SPD800,
-};
-
/**
* pll_freq_get - get pll frequency
* Fout = Fref * NF(mult) / NR(prediv) / OD
[DDR3_PLL] = {KS2_DDR3APLLCTL0, KS2_DDR3APLLCTL1},
};
-int dev_speeds[] = {
- SPD800,
- SPD1000,
- SPD1200,
- SPD800,
- SPD800,
- SPD800,
- SPD800,
- SPD800,
- SPD1200,
- SPD1000,
- SPD800,
- SPD800,
- SPD800,
-};
-
-int arm_speeds[] = {
- SPD800,
- SPD1000,
- SPD1200,
- SPD1350,
- SPD1400,
- SPD800,
- SPD1400,
- SPD1350,
- SPD1200,
- SPD1000,
- SPD800,
- SPD800,
- SPD800,
-};
-
/**
* pll_freq_get - get pll frequency
* Fout = Fref * NF(mult) / NR(prediv) / OD
#include <asm/arch/clock.h>
#include <asm/arch/clock_defs.h>
-#define MAX_SPEEDS 13
+/* DEV and ARM speed definitions as specified in DEVSPEED register */
+int __weak speeds[DEVSPEED_NUMSPDS] = {
+ SPD1000,
+ SPD1200,
+ SPD1350,
+ SPD1400,
+ SPD1500,
+ SPD1400,
+ SPD1350,
+ SPD1200,
+ SPD1000,
+ SPD800,
+};
static void wait_for_completion(const struct pll_init_data *data)
{
init_pll(&config[i]);
}
-static int get_max_speed(u32 val, int *speeds)
+static int get_max_speed(u32 val, u32 speed_supported)
{
- int j;
+ int speed;
- if (!val)
- return speeds[0];
-
- for (j = 1; j < MAX_SPEEDS; j++) {
- if (val == 1)
- return speeds[j];
- val >>= 1;
+ /* Left most setbit gives the speed */
+ for (speed = DEVSPEED_NUMSPDS; speed >= 0; speed--) {
+ if ((val & BIT(speed)) & speed_supported)
+ return speeds[speed];
}
+ /* If no bit is set, use SPD800 */
return SPD800;
}
-#ifdef CONFIG_SOC_K2HK
-static u32 read_efuse_bootrom(void)
-{
- return (cpu_revision() > 1) ? __raw_readl(KS2_EFUSE_BOOTROM) :
- __raw_readl(KS2_REV1_DEVSPEED);
-}
-#else
static inline u32 read_efuse_bootrom(void)
{
- return __raw_readl(KS2_EFUSE_BOOTROM);
+ if (cpu_is_k2hk() && (cpu_revision() <= 1))
+ return __raw_readl(KS2_REV1_DEVSPEED);
+ else
+ return __raw_readl(KS2_EFUSE_BOOTROM);
}
-#endif
-#ifndef CONFIG_SOC_K2E
-inline int get_max_arm_speed(void)
+int get_max_arm_speed(void)
{
- return get_max_speed(read_efuse_bootrom() & 0xffff, arm_speeds);
+ u32 armspeed = read_efuse_bootrom();
+
+ armspeed = (armspeed & DEVSPEED_ARMSPEED_MASK) >>
+ DEVSPEED_ARMSPEED_SHIFT;
+
+ return get_max_speed(armspeed, ARM_SUPPORTED_SPEEDS);
}
-#endif
-inline int get_max_dev_speed(void)
+int get_max_dev_speed(void)
{
- return get_max_speed((read_efuse_bootrom() >> 16) & 0xffff, dev_speeds);
+ u32 devspeed = read_efuse_bootrom();
+
+ devspeed = (devspeed & DEVSPEED_DEVSPEED_MASK) >>
+ DEVSPEED_DEVSPEED_SHIFT;
+
+ return get_max_speed(devspeed, DEV_SUPPORTED_SPEEDS);
}
TETRIS_PLL,
};
-enum {
- SPD800,
- SPD850,
- SPD1000,
- SPD1250,
- SPD1350,
- SPD1400,
- SPD1500,
- SPD_RSV
-};
-
#define CORE_PLL_800 {CORE_PLL, 16, 1, 2}
#define CORE_PLL_850 {CORE_PLL, 17, 1, 2}
#define CORE_PLL_1000 {CORE_PLL, 20, 1, 2}
#define DDR3_PLL_800 {DDR3_PLL, 16, 1, 2}
#define DDR3_PLL_333 {DDR3_PLL, 20, 1, 6}
+/* k2e DEV supports 800, 850, 1000, 1250, 1350, 1400, 1500 MHz */
+#define DEV_SUPPORTED_SPEEDS 0xFFF
+#define ARM_SUPPORTED_SPEEDS 0
+
#endif
DDR3B_PLL,
};
-enum {
- SPD800,
- SPD1000,
- SPD1200,
- SPD1350,
- SPD1400,
- SPD_RSV
-};
-
#define CORE_PLL_799 {CORE_PLL, 13, 1, 2}
#define CORE_PLL_983 {CORE_PLL, 16, 1, 2}
#define CORE_PLL_999 {CORE_PLL, 122, 15, 1}
#define DDR3_PLL_800(x) {DDR3##x##_PLL, 16, 1, 2}
#define DDR3_PLL_333(x) {DDR3##x##_PLL, 20, 1, 6}
+/* k2h DEV supports 800, 1000, 1200 MHz */
+#define DEV_SUPPORTED_SPEEDS 0x383
+/* k2h ARM supportd 800, 1000, 1200, 1350, 1400 MHz */
+#define ARM_SUPPORTED_SPEEDS 0x3EF
+
#endif
DDR3_PLL,
};
-enum {
- SPD800,
- SPD1000,
- SPD1200,
- SPD1350,
- SPD1400,
- SPD_RSV
-};
-
#define CORE_PLL_799 {CORE_PLL, 13, 1, 2}
#define CORE_PLL_983 {CORE_PLL, 16, 1, 2}
#define CORE_PLL_1000 {CORE_PLL, 114, 7, 2}
#define DDR3_PLL_800 {DDR3_PLL, 16, 1, 2}
#define DDR3_PLL_333 {DDR3_PLL, 20, 1, 6}
+/* k2l DEV supports 800, 1000, 1200 MHz */
+#define DEV_SUPPORTED_SPEEDS 0x383
+/* k2l ARM supportd 800, 1000, 1200, MHz */
+#define ARM_SUPPORTED_SPEEDS 0x383
+
#endif
#define GENERATE_INDX_STR(NUM, STRING) #NUM"\t- "#STRING"\n"
#define CLOCK_INDEXES_LIST CLK_LIST(GENERATE_INDX_STR)
+enum {
+ SPD800,
+ SPD850,
+ SPD1000,
+ SPD1200,
+ SPD1250,
+ SPD1350,
+ SPD1400,
+ SPD1500,
+ NUM_SPDS,
+};
+
enum clk_e {
CLK_LIST(GENERATE_ENUM)
};
};
extern const struct keystone_pll_regs keystone_pll_regs[];
-extern int dev_speeds[];
-extern int arm_speeds[];
extern s16 divn_val[];
+extern int speeds[];
void init_plls(int num_pll, struct pll_init_data *config);
void init_pll(const struct pll_init_data *data);
#define CPU_66AK2Ex 0xb9a6
#define CPU_66AK2Lx 0xb9a7
+/* DEVSPEED register */
+#define DEVSPEED_DEVSPEED_SHIFT 16
+#define DEVSPEED_DEVSPEED_MASK (0xfff << 16)
+#define DEVSPEED_ARMSPEED_SHIFT 0
+#define DEVSPEED_ARMSPEED_MASK 0xfff
+#define DEVSPEED_NUMSPDS 12
+
#ifdef CONFIG_SOC_K2HK
#include <asm/arch/hardware-k2hk.h>
#endif
[usb_clk] = 100000000,
};
-static struct pll_init_data core_pll_config[] = {
- CORE_PLL_800,
- CORE_PLL_850,
- CORE_PLL_1000,
- CORE_PLL_1250,
- CORE_PLL_1350,
- CORE_PLL_1400,
- CORE_PLL_1500,
+static struct pll_init_data core_pll_config[NUM_SPDS] = {
+ [SPD800] = CORE_PLL_800,
+ [SPD850] = CORE_PLL_850,
+ [SPD1000] = CORE_PLL_1000,
+ [SPD1250] = CORE_PLL_1250,
+ [SPD1350] = CORE_PLL_1350,
+ [SPD1400] = CORE_PLL_1400,
+ [SPD1500] = CORE_PLL_1500,
+};
+
+/* DEV and ARM speed definitions as specified in DEVSPEED register */
+int speeds[DEVSPEED_NUMSPDS] = {
+ SPD850,
+ SPD1000,
+ SPD1250,
+ SPD1350,
+ SPD1400,
+ SPD1500,
+ SPD1400,
+ SPD1350,
+ SPD1250,
+ SPD1000,
+ SPD850,
+ SPD800,
};
s16 divn_val[16] = {
[rp1_clk] = 123456789
};
-static struct pll_init_data core_pll_config[] = {
- CORE_PLL_799,
- CORE_PLL_999,
- CORE_PLL_1200,
+static struct pll_init_data core_pll_config[NUM_SPDS] = {
+ [SPD800] = CORE_PLL_799,
+ [SPD1000] = CORE_PLL_999,
+ [SPD1200] = CORE_PLL_1200,
};
s16 divn_val[16] = {
};
static struct pll_init_data tetris_pll_config[] = {
- TETRIS_PLL_800,
- TETRIS_PLL_1000,
- TETRIS_PLL_1200,
- TETRIS_PLL_1350,
- TETRIS_PLL_1400,
+ [SPD800] = TETRIS_PLL_800,
+ [SPD1000] = TETRIS_PLL_1000,
+ [SPD1200] = TETRIS_PLL_1200,
+ [SPD1350] = TETRIS_PLL_1350,
+ [SPD1400] = TETRIS_PLL_1400,
};
static struct pll_init_data pa_pll_config =
[usb_clk] = 100000000,
};
-static struct pll_init_data core_pll_config[] = {
- CORE_PLL_799,
- CORE_PLL_1000,
- CORE_PLL_1198,
+static struct pll_init_data core_pll_config[NUM_SPDS] = {
+ [SPD800] = CORE_PLL_799,
+ [SPD1000] = CORE_PLL_1000,
+ [SPD800] = CORE_PLL_1198,
};
s16 divn_val[16] = {
};
static struct pll_init_data tetris_pll_config[] = {
- TETRIS_PLL_799,
- TETRIS_PLL_1000,
- TETRIS_PLL_1198,
- TETRIS_PLL_1352,
- TETRIS_PLL_1401,
+ [SPD800] = TETRIS_PLL_799,
+ [SPD1000] = TETRIS_PLL_1000,
+ [SPD1200] = TETRIS_PLL_1198,
+ [SPD1350] = TETRIS_PLL_1352,
+ [SPD1400] = TETRIS_PLL_1401,
};
static struct pll_init_data pa_pll_config =
projects / u-boot.git / commitdiff
