freescale: Drop unused zm7300 driver

This is not used anymore. Drop the driver and Kconfig option.

Signed-off-by: Simon Glass <sjg@chromium.org>

diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index c200cf4d4033c9be05efb382f6d9b184faa2931b..b4faf6f9e0aacdbcbeb7bd3ef59ca0f3e057c4ce 100644 (file)
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -54,7 +54,6 @@ obj-$(CONFIG_TARGET_MPC8548CDS)       += cds_pci_ft.o
 obj-$(CONFIG_TARGET_P3041DS)           += ics307_clk.o
 obj-$(CONFIG_TARGET_P4080DS)           += ics307_clk.o
 obj-$(CONFIG_TARGET_P5040DS)           += ics307_clk.o
-obj-$(CONFIG_ZM7300)           += zm7300.o
 ifeq ($(CONFIG_$(SPL_)POWER_LEGACY),y)
 obj-$(CONFIG_POWER_PFUZE100)   += pfuze.o
 endif

diff --git a/board/freescale/common/zm7300.c b/board/freescale/common/zm7300.c
deleted file mode 100644 (file)
index e8c2fc8..0000000
--- a/board/freescale/common/zm7300.c
+++ /dev/null
@@ -1,232 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-/* Power-One ZM7300 DPM */
-#include "zm7300.h"
-#include <log.h>
-
-#define DPM_WP 0x96
-#define WRP_OPCODE 0x01
-#define WRM_OPCODE 0x02
-#define RRP_OPCODE 0x11
-
-#define DPM_SUCCESS 0x01
-#define DPM_EXEC_FAIL 0x00
-
-static const uint16_t hex_to_1_10mv[] = {
-       5000,
-       5125,
-       5250,
-       5375,
-       5500,
-       5625,
-       5750,
-       5875,
-       6000,
-       6125,
-       6250,
-       6375,
-       6500,
-       6625,
-       6750,
-       6875,
-       7000,
-       7125,
-       7250,
-       7375,
-       7500,
-       7625,
-       7750,
-       7875,
-       8000,
-       8125,
-       8250,
-       8375,
-       8500,
-       8625,
-       8750,
-       8875,
-       9000,
-       9125,
-       9250,
-       9375,
-       9500,  /* 0.95mV */
-       9625,
-       9750,
-       9875,
-       10000,  /* 1.0V */
-       10125,
-       10250,
-       10375,
-       10500,
-       10625,
-       10750,
-       10875,
-       11000,
-       11125,
-       11250,
-       11375,
-       11500,
-       11625,
-       11750,
-       11875,
-       12000,
-       12125,
-       12250,
-       12375,
-       0,      /* reserved */
-};
-
-
-/* Read Data d from Register r of POL p */
-u8 dpm_rrp(uchar r)
-{
-       u8 ret[5];
-
-       ret[0] = RRP_OPCODE;
-       /* POL is 0 */
-       ret[1] = 0;
-       ret[2] = r;
-       i2c_read(I2C_DPM_ADDR, 0, -3, ret, 2);
-       if (ret[1] == DPM_SUCCESS) { /* the DPM returned success as status */
-               debug("RRP_OPCODE returned success data is %x\n", ret[0]);
-               return ret[0];
-       } else {
-               return -1;
-       }
-}
-
-/* Write Data d into DPM register r (RAM) */
-int dpm_wrm(u8 r, u8 d)
-{
-       u8 ret[5];
-
-       ret[0] = WRM_OPCODE;
-       ret[1] = r;
-       ret[2] = d;
-       i2c_read(I2C_DPM_ADDR, 0, -3, ret, 1);
-       if (ret[0] == DPM_SUCCESS) { /* the DPM returned success as status */
-               debug("WRM_OPCODE returned success data is %x\n", ret[0]);
-               return ret[0];
-       } else {
-               return -1;
-       }
-}
-
-/* Write Data d into Register r of POL(s) a */
-int dpm_wrp(u8 r, u8 d)
-{
-       u8 ret[7];
-
-       ret[0] = WRP_OPCODE;
-       /* only POL0 is present */
-       ret[1] = 0x01;
-       ret[2] = 0x00;
-       ret[3] = 0x00;
-       ret[4] = 0x00;
-       ret[5] = r;
-       ret[6] = d;
-       i2c_read(I2C_DPM_ADDR, 0, -7, ret, 1);
-       if (ret[0] == DPM_SUCCESS) { /* the DPM returned success as status */
-               debug("WRP_OPCODE returned success data is %x\n", ret[0]);
-               return 0;
-       } else {
-               return -1;
-       }
-}
-
-/* Uses the DPM command RRP */
-u8 zm_read(uchar reg)
-{
-       return dpm_rrp(reg);
-}
-
-/* ZM_write --
-       Steps:
-       a. Write data to the register
-       b. Read data from register and compare to written value
-       c. Return return_code & voltage_read
-*/
-u8 zm_write(u8 reg, u8 data)
-{
-       u8 d;
-
-       /* write data to register */
-       dpm_wrp(reg, data);
-
-       /* read register and compare to written value */
-       d = dpm_rrp(reg);
-       if (d != data) {
-               printf("zm_write : Comparison register data failed\n");
-               return -1;
-       }
-
-       return d;
-}
-
-/* zm_write_out_voltage
- * voltage in 1/10 mV
- */
-int zm_write_voltage(int voltage)
-{
-       u8 reg = 0x7, vid;
-       uint16_t voltage_read;
-       u8 ret;
-
-       vid =  (voltage - 5000) / ZM_STEP;
-
-       ret = zm_write(reg, vid);
-       if (ret != -1) {
-               voltage_read = hex_to_1_10mv[ret];
-               debug("voltage set to %dmV\n", voltage_read/10);
-               return voltage_read;
-       }
-       return -1;
-}
-
-/* zm_read_out_voltage
- * voltage in 1/10 mV
- */
-int zm_read_voltage(void)
-{
-       u8 reg = 0x7;
-       u8 ret;
-       int voltage;
-
-       ret = zm_read(reg);
-       if (ret != -1) {
-               voltage =  hex_to_1_10mv[ret];
-               debug("Voltage read is %dmV\n", voltage/10);
-               return voltage;
-       } else {
-               return -1;
-       }
-}
-
-int zm_disable_wp()
-{
-       u8 new_wp_value;
-
-       /* Disable using Write-Protect register 0x96 */
-       new_wp_value = 0x8;
-       if ((dpm_wrm(DPM_WP, new_wp_value)) < 0) {
-               printf("Disable Write-Protect register failed\n");
-               return -1;
-       }
-       return 0;
-}
-
-int zm_enable_wp()
-{
-       u8 orig_wp_value;
-       orig_wp_value = 0x0;
-
-       /* Enable using Write-Protect register 0x96 */
-       if ((dpm_wrm(DPM_WP, orig_wp_value)) < 0) {
-               printf("Enable Write-Protect register failed\n");
-               return -1;
-       }
-       return 0;
-}

diff --git a/board/freescale/common/zm7300.h b/board/freescale/common/zm7300.h
deleted file mode 100644 (file)
index 9ce24af..0000000
--- a/board/freescale/common/zm7300.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#ifndef __ZM7300_H_
-#define __ZM7300_H     1_
-
-#include <common.h>
-#include <i2c.h>
-#include <errno.h>
-#include <asm/io.h>
-
-#define ZM_STEP 125
-int zm7300_set_voltage(int voltage_1_10mv);
-int zm_write_voltage(int voltage);
-int zm_read_voltage(void);
-int zm_disable_wp(void);
-int zm_enable_wp(void);
-
-#endif /* __ZM7300_H_ */