mx7dsabresd: Directly write to register LDOGCTL

Register LDOGCTL contains only bit 0 as a valid bit, so there is no need
to do a read-modify-write operation.

Simplify the code by writing directly to this register.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>

diff --git a/board/freescale/mx7dsabresd/mx7dsabresd.c b/board/freescale/mx7dsabresd/mx7dsabresd.c
index 3098e1a3dd80ca2c7465a75135affbe3ebc0d4f4..b9365445e85edb747a7a00ecc612b3785cd5f679 100644 (file)
--- a/board/freescale/mx7dsabresd/mx7dsabresd.c
+++ b/board/freescale/mx7dsabresd/mx7dsabresd.c
@@ -578,9 +578,7 @@ int power_init_board(void)
        printf("PMIC: PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", reg, rev_id);
 
        /* disable Low Power Mode during standby mode */
-       pmic_reg_read(p, PFUZE3000_LDOGCTL, &reg);
-       reg |= 0x1;
-       pmic_reg_write(p, PFUZE3000_LDOGCTL, reg);
+       pmic_reg_write(p, PFUZE3000_LDOGCTL, 0x1);
 
        return 0;
 }