ARM: omap3_logic: Remove hard-coded USB muxing

With recent fixes to USB pinmuxing in the device trees, there
is no need to hard-code the pinmuxing in this table.  It is
all handled in DM now.

Signed-off-by: Adam Ford <aford173@gmail.com>

diff --git a/board/logicpd/omap3som/omap3logic.h b/board/logicpd/omap3som/omap3logic.h
index 3a6f6c1f4eec9f6ef38c4df80e2f595808dcbb7d..ba63aa04c34f52eba9a0bc8fb22740dfd31b7298 100644 (file)
--- a/board/logicpd/omap3som/omap3logic.h
+++ b/board/logicpd/omap3som/omap3logic.h
@@ -233,23 +233,6 @@ void set_muxconf_regs(void)
        MUX_VAL(CP(D2D_SREAD), (IEN  | PTD | DIS | M0)) /*d2d_sread*/
        MUX_VAL(CP(D2D_MBUSFLAG), (IEN  | PTD | DIS | M0)) /*d2d_mbusflag*/
        MUX_VAL(CP(D2D_SBUSFLAG), (IEN  | PTD | DIS | M0)) /*d2d_sbusflag*/
-
-#ifdef CONFIG_USB_EHCI_OMAP /* SOM-LV Uses EHCI-OMAP */
-       MUX_VAL(CP(ETK_D14_ES2), (IEN  | PTD | DIS | M3)) /*HSUSB2_DATA0*/
-       MUX_VAL(CP(ETK_D15_ES2), (IEN  | PTD | DIS | M3)) /*HSUSB2_DATA1*/
-       MUX_VAL(CP(MCSPI1_CS3), (IEN  | PTD | EN  | M0)) /*HSUSB2_DATA2*/
-       MUX_VAL(CP(MCSPI2_CS1), (IEN  | PTD | EN  | M0)) /*HSUSB2_DATA3*/
-       MUX_VAL(CP(MCSPI2_SIMO), (IEN  | PTD | DIS | M0)) /*HSUSB2_DATA4*/
-       MUX_VAL(CP(MCSPI2_SOMI), (IEN  | PTD | DIS | M0)) /*HSUSB2_DATA5*/
-       MUX_VAL(CP(MCSPI2_CS0), (IEN  | PTD | EN  | M0)) /*HSUSB2_DATA6*/
-       MUX_VAL(CP(MCSPI2_CLK), (IEN  | PTD | DIS | M0)) /*HSUSB2_DATA7*/
-       MUX_VAL(CP(SYS_BOOT2),  (IEN  | PTD | DIS | M4)) /* GPIO_4 */
-       MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB2_CLK*/
-       MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB2_STP*/
-       MUX_VAL(CP(ETK_D12_ES2), (IEN  | PTU | DIS | M3)) /*HSUSB2_DIR*/
-       MUX_VAL(CP(ETK_D13_ES2), (IEN  | PTD | DIS | M3)) /*HSUSB2_NXT*/
-#endif
-
 }
 
 #endif