arm: socfpga: clean up socfpga_common.h

Remove outdated macros and comments (not used any more, outdated due to
DM conversion) from socfpga_common.h.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Series-changes: 3
- changed commit message: s/defines/macros and comments/

Series-changes: 2
- remove even more outdated things

diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index a65fc804e3ddf440be01e77fec0f98a161e2346f..5b5e5f5d43e2e1ac09805453fc109051a6187d74 100644 (file)
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -72,29 +72,12 @@
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
                                                /* Boot argument buffer size */
 
-#ifndef CONFIG_SYS_HOSTNAME
-#define CONFIG_SYS_HOSTNAME    CONFIG_SYS_BOARD
-#endif
-
 /*
  * Cache
  */
 #define CONFIG_SYS_L2_PL310
 #define CONFIG_SYS_PL310_BASE          SOCFPGA_MPUL2_ADDRESS
 
-/*
- * EPCS/EPCQx1 Serial Flash Controller
- */
-#ifdef CONFIG_ALTERA_SPI
-/*
- * The base address is configurable in QSys, each board must specify the
- * base address based on it's particular FPGA configuration. Please note
- * that the address here is incremented by  0x400  from the Base address
- * selected in QSys, since the SPI registers are at offset +0x400.
- * #define CONFIG_SYS_SPI_BASE         0xff240400
- */
-#endif
-
 /*
  * Ethernet on SoC (EMAC)
  */
@@ -162,15 +145,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
 #define CONFIG_CQSPI_REF_CLK           cm_get_qspi_controller_clk_hz()
 #endif
 
-/*
- * Designware SPI support
- */
-
-/*
- * Serial Driver
- */
-#define CONFIG_SYS_NS16550_SERIAL
-
 /*
  * USB
  */
@@ -206,20 +180,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
 #define CONFIG_ENV_SECT_SIZE           (64 * 1024)
 #endif
 
-/*
- * mtd partitioning for serial NOR flash
- *
- * device nor0 <ff705000.spi.0>, # parts = 6
- * #: name                size            offset          mask_flags
- * 0: u-boot              0x00100000      0x00000000      0
- * 1: env1                0x00040000      0x00100000      0
- * 2: env2                0x00040000      0x00140000      0
- * 3: UBI                 0x03e80000      0x00180000      0
- * 4: boot                0x00e80000      0x00180000      0
- * 5: rootfs              0x01000000      0x01000000      0
- *
- */
-
 /*
  * SPL
  *