SPEAr : Adding README.spear in doc

README.spear contains information about SPEAr architecture and
build options etc

Signed-off-by: Vipin <vipin.kumar@st.com>

diff --git a/doc/README.spear b/doc/README.spear
new file mode 100644 (file)
index 0000000..a8b1052
--- /dev/null
+++ b/doc/README.spear
@@ -0,0 +1,48 @@
+
+SPEAr (Structured Processor Enhanced Architecture).
+
+SPEAr600 is also known as SPEArPlus and SPEAr300 is also known as SPEArBasic
+
+The SPEAr SoC family embeds a customizable logic that can be programmed
+one-time by a customer at silicon mask level (i.e. not at runtime!).
+
+We are now adding the support in u-boot for two SoC: SPEAr600 and SPEAr3xx.
+
+All 4 SoCs share common peripherals.
+
+1. ARM926ejs core based (sp600 has two cores, the 2nd handled only in Linux)
+2. FastEthernet (sp600 has Gbit version, but same controller - GMAC)
+3. USB Host
+4. USB Device
+5. NAND controller (FSMC)
+6. Serial NOR ctrl
+7. I2C
+8. SPI
+9. CLCD
+10. others ..
+
+Everything is supported in Linux.
+u-boot is not currently supporting all peripeharls (just a few as listed below).
+1. USB Device
+2. NAND controller (FSMC)
+3. Serial Memory Interface
+4. EMI (Parallel NOR interface)
+4. I2C
+5. UART
+
+Build options
+       make spear600_config
+       make spear300_config
+       make spear310_config
+       make spear320_config
+
+Further options
+       make ENV=NAND (supported by all 4 SoCs)
+       - This option generates a uboot image that saves environment inn NAND
+
+       make CONSOLE=USB (supported by all 4 SoCs)
+       - This option generates a uboot image for using usbdevice as a tty i/f
+
+       make FLASH=PNOR (supported by SPEAr310 and SPEAr320)
+       - This option generates a uboot image that supports emi controller for
+       CFI compliant parallel NOR flash