apq8016: Add support for UART1 clocks and pinmux

SE HMIBSC board uses UART1 as the main debug console, so add
corresponding clocks and pinmux support. Along with that update
instructions to enable clocks for debug UART support.

Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>

diff --git a/drivers/clk/qcom/clock-apq8016.c b/drivers/clk/qcom/clock-apq8016.c
index 6210fba8798475fdf53cd8cada948310386865c0..d3b63b9c1ac5b440b32bab0bc9f7b1c9720c1c30 100644 (file)
--- a/drivers/clk/qcom/clock-apq8016.c
+++ b/drivers/clk/qcom/clock-apq8016.c
@@ -31,7 +31,8 @@
 #define BLSP1_AHB_CBCR                 0x1008
 
 /* Uart clock control registers */
-#define BLSP1_UART2_BCR                        (0x3028)
+#define BLSP1_UART1_APPS_CBCR          (0x203C)
+#define BLSP1_UART1_APPS_CMD_RCGR      (0x2044)
 #define BLSP1_UART2_APPS_CBCR          (0x302C)
 #define BLSP1_UART2_APPS_CMD_RCGR      (0x3034)
 
@@ -52,7 +53,7 @@ static struct vote_clk gcc_blsp1_ahb_clk = {
 };
 
 /* SDHCI */
-static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate)
+static int apq8016_clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate)
 {
        int div = 15; /* 100MHz default */
 
@@ -70,20 +71,35 @@ static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate)
 }
 
 /* UART: 115200 */
-int apq8016_clk_init_uart(phys_addr_t base)
+int apq8016_clk_init_uart(phys_addr_t base, unsigned long id)
 {
+       u32 cmd_rcgr, apps_cbcr;
+
+       switch (id) {
+       case GCC_BLSP1_UART1_APPS_CLK:
+               cmd_rcgr = BLSP1_UART1_APPS_CMD_RCGR;
+               apps_cbcr = BLSP1_UART1_APPS_CBCR;
+               break;
+       case GCC_BLSP1_UART2_APPS_CLK:
+               cmd_rcgr = BLSP1_UART2_APPS_CMD_RCGR;
+               apps_cbcr = BLSP1_UART2_APPS_CBCR;
+               break;
+       default:
+               return 0;
+       }
+
        /* Enable AHB clock */
        clk_enable_vote_clk(base, &gcc_blsp1_ahb_clk);
 
        /* 7372800 uart block clock @ GPLL0 */
-       clk_rcg_set_rate_mnd(base, BLSP1_UART2_APPS_CMD_RCGR, 1, 144, 15625,
-                            CFG_CLK_SRC_GPLL0, 16);
+       clk_rcg_set_rate_mnd(base, cmd_rcgr, 1, 144, 15625, CFG_CLK_SRC_GPLL0,
+                            16);
 
        /* Vote for gpll0 clock */
        clk_enable_gpll0(base, &gpll0_vote_clk);
 
        /* Enable core clk */
-       clk_enable_cbc(base + BLSP1_UART2_APPS_CBCR);
+       clk_enable_cbc(base + apps_cbcr);
 
        return 0;
 }
@@ -94,13 +110,12 @@ static ulong apq8016_clk_set_rate(struct clk *clk, ulong rate)
 
        switch (clk->id) {
        case GCC_SDCC1_APPS_CLK: /* SDC1 */
-               return clk_init_sdc(priv, 0, rate);
-               break;
+               return apq8016_clk_init_sdc(priv, 0, rate);
        case GCC_SDCC2_APPS_CLK: /* SDC2 */
-               return clk_init_sdc(priv, 1, rate);
-               break;
+               return apq8016_clk_init_sdc(priv, 1, rate);
+       case GCC_BLSP1_UART1_APPS_CLK: /* UART1 */
        case GCC_BLSP1_UART2_APPS_CLK: /* UART2 */
-               apq8016_clk_init_uart(priv->base);
+               apq8016_clk_init_uart(priv->base, clk->id);
                return 7372800;
        default:
                return 0;

diff --git a/drivers/pinctrl/qcom/pinctrl-apq8016.c b/drivers/pinctrl/qcom/pinctrl-apq8016.c
index a9a00f4b081952fd94aa6d3c7ada01ac08838d86..1ee8b7db1a23561fc43cd717926b5375ac889e1e 100644 (file)
--- a/drivers/pinctrl/qcom/pinctrl-apq8016.c
+++ b/drivers/pinctrl/qcom/pinctrl-apq8016.c
@@ -29,6 +29,7 @@ static const char * const msm_pinctrl_pins[] = {
 };
 
 static const struct pinctrl_function msm_pinctrl_functions[] = {
+       {"blsp_uart1", 2},
        {"blsp_uart2", 2},
 };
 

diff --git a/drivers/serial/serial_msm.c b/drivers/serial/serial_msm.c
index c05dda8bdb970b17ef83b93db3424bfa0dbf0fb2..06a948a2f643fdc635990ed9f793758787003d72 100644 (file)
--- a/drivers/serial/serial_msm.c
+++ b/drivers/serial/serial_msm.c
@@ -300,12 +300,17 @@ static struct msm_serial_data init_serial_data = {
 #include <debug_uart.h>
 
 /* Uncomment to turn on UART clocks when debugging U-Boot as aboot on MSM8916 */
-//int apq8016_clk_init_uart(phys_addr_t gcc_base);
+//int apq8016_clk_init_uart(phys_addr_t gcc_base, unsigned long id);
 
 static inline void _debug_uart_init(void)
 {
-       /* Uncomment to turn on UART clocks when debugging U-Boot as aboot on MSM8916 */
-       //apq8016_clk_init_uart(0x1800000);
+       /*
+        * Uncomment to turn on UART clocks when debugging U-Boot as aboot
+        * on MSM8916. Supported debug UART clock IDs:
+        *   - db410c: GCC_BLSP1_UART2_APPS_CLK
+        *   - HMIBSC: GCC_BLSP1_UART1_APPS_CLK
+        */
+       //apq8016_clk_init_uart(0x1800000, <uart_clk_id>);
        uart_dm_init(&init_serial_data);
 }