]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
video: panel: add Renesas R69328 MIPI DSI panel driver
authorSvyatoslav Ryhel <clamor95@gmail.com>
Tue, 25 Apr 2023 07:51:45 +0000 (10:51 +0300)
committerAnatolij Gustschin <agust@denx.de>
Wed, 26 Apr 2023 05:29:12 +0000 (07:29 +0200)
Driver adds support for panels with Renesas R69328 IC

Currently supported compatible is:
- jdi,dx12d100vm0eaa

Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # LG P880 T30
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895 T30
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
drivers/video/Kconfig
drivers/video/Makefile
drivers/video/renesas-r69328.c [new file with mode: 0644]

index e75282b5545a96847344ed2a3ec695e2f83dbe1c..ebbf3d7c8c1705e6e3909ce7a64fd0a0e521053e 100644 (file)
@@ -489,6 +489,15 @@ config VIDEO_LCD_RENESAS_R61307
          IPS-LCD module with Renesas R69328 IC. The panel has a 1024x768
          resolution and uses 24 bit RGB per pixel.
 
+config VIDEO_LCD_RENESAS_R69328
+       tristate "Renesas R69328 720x1280 DSI video mode panel"
+       depends on PANEL && BACKLIGHT
+       select VIDEO_MIPI_DSI
+       help
+         Say Y here if you want to enable support for JDI dx12d100vm0eaa
+         IPS-LCD module with Renesas R69328 IC. The panel has a 720x1280
+         resolution and uses 24 bit RGB per pixel.
+
 config VIDEO_LCD_SSD2828
        bool "SSD2828 bridge chip"
        ---help---
index 4c016f1fdfb3bc97dc7d8c78db2ea57caafaabae..f845a564ab3cc2ad45d5aff7dd64070d2acf27e5 100644 (file)
@@ -57,6 +57,7 @@ obj-$(CONFIG_VIDEO_LCD_HITACHI_TX18D42VM) += hitachi_tx18d42vm_lcd.o
 obj-$(CONFIG_VIDEO_LCD_ORISETECH_OTM8009A) += orisetech_otm8009a.o
 obj-$(CONFIG_VIDEO_LCD_RAYDIUM_RM68200) += raydium-rm68200.o
 obj-$(CONFIG_VIDEO_LCD_RENESAS_R61307) += renesas-r61307.o
+obj-$(CONFIG_VIDEO_LCD_RENESAS_R69328) += renesas-r69328.o
 obj-$(CONFIG_VIDEO_LCD_SSD2828) += ssd2828.o
 obj-$(CONFIG_VIDEO_LCD_TDO_TL070WSH30) += tdo-tl070wsh30.o
 obj-$(CONFIG_VIDEO_MCDE_SIMPLE) += mcde_simple.o
diff --git a/drivers/video/renesas-r69328.c b/drivers/video/renesas-r69328.c
new file mode 100644 (file)
index 0000000..d2f7169
--- /dev/null
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Renesas R69328 panel driver
+ *
+ * Copyright (c) 2022 Svyatoslav Ryhel <clamor95@gmail.com>
+ */
+
+#include <common.h>
+#include <backlight.h>
+#include <dm.h>
+#include <panel.h>
+#include <log.h>
+#include <misc.h>
+#include <mipi_display.h>
+#include <mipi_dsi.h>
+#include <asm/gpio.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <power/regulator.h>
+
+/*
+ * The datasheet is not publicly available, all values are
+ * taken from the downstream. If you have access to datasheets,
+ * corrections are welcome.
+ */
+
+#define R69328_MACP            0xB0 /* Manufacturer Command Access Protect */
+
+#define R69328_GAMMA_SET_A     0xC8 /* Gamma Setting A */
+#define R69328_GAMMA_SET_B     0xC9 /* Gamma Setting B */
+#define R69328_GAMMA_SET_C     0xCA /* Gamma Setting C */
+
+#define R69328_POWER_SET       0xD1
+
+struct renesas_r69328_priv {
+       struct udevice *backlight;
+
+       struct gpio_desc enable_gpio;
+       struct gpio_desc reset_gpio;
+};
+
+static const u8 address_mode[] = {
+       MIPI_DCS_SET_ADDRESS_MODE
+};
+
+#define dsi_generic_write_seq(dsi, cmd, seq...) do {                   \
+               static const u8 b[] = { cmd, seq };                     \
+               int ret;                                                \
+               ret = mipi_dsi_dcs_write_buffer(dsi, b, ARRAY_SIZE(b)); \
+               if (ret < 0)                                            \
+                       return ret;                                     \
+       } while (0)
+
+static struct display_timing default_timing = {
+       .pixelclock.typ         = 68000000,
+       .hactive.typ            = 720,
+       .hfront_porch.typ       = 92,
+       .hback_porch.typ        = 62,
+       .hsync_len.typ          = 4,
+       .vactive.typ            = 1280,
+       .vfront_porch.typ       = 6,
+       .vback_porch.typ        = 3,
+       .vsync_len.typ          = 1,
+};
+
+static int renesas_r69328_enable_backlight(struct udevice *dev)
+{
+       struct renesas_r69328_priv *priv = dev_get_priv(dev);
+       int ret;
+
+       ret = dm_gpio_set_value(&priv->enable_gpio, 1);
+       if (ret) {
+               log_err("error changing enable-gpios (%d)\n", ret);
+               return ret;
+       }
+       mdelay(5);
+
+       ret = dm_gpio_set_value(&priv->reset_gpio, 0);
+       if (ret) {
+               log_err("error changing reset-gpios (%d)\n", ret);
+               return ret;
+       }
+       mdelay(5);
+
+       ret = dm_gpio_set_value(&priv->reset_gpio, 1);
+       if (ret) {
+               log_err("error changing reset-gpios (%d)\n", ret);
+               return ret;
+       }
+
+       mdelay(5);
+
+       return 0;
+}
+
+static int renesas_r69328_set_backlight(struct udevice *dev, int percent)
+{
+       struct renesas_r69328_priv *priv = dev_get_priv(dev);
+       struct mipi_dsi_panel_plat *plat = dev_get_plat(dev);
+       struct mipi_dsi_device *dsi = plat->device;
+       int ret;
+
+       mipi_dsi_dcs_write_buffer(dsi, address_mode,
+                                 sizeof(address_mode));
+
+       ret = mipi_dsi_dcs_set_pixel_format(dsi, MIPI_DCS_PIXEL_FMT_24BIT << 4);
+       if (ret < 0) {
+               log_err("failed to set pixel format: %d\n", ret);
+               return ret;
+       }
+
+       ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+       if (ret < 0) {
+               log_err("failed to exit sleep mode: %d\n", ret);
+               return ret;
+       }
+
+       mdelay(100);
+
+       /* MACP Off */
+       dsi_generic_write_seq(dsi, R69328_MACP, 0x04);
+
+       dsi_generic_write_seq(dsi, R69328_POWER_SET, 0x14,
+                             0x1d, 0x21, 0x67, 0x11, 0x9a);
+
+       dsi_generic_write_seq(dsi, R69328_GAMMA_SET_A, 0x00,
+                             0x1a, 0x20, 0x28, 0x25, 0x24,
+                             0x26, 0x15, 0x13, 0x11, 0x18,
+                             0x1e, 0x1c, 0x00, 0x00, 0x1a,
+                             0x20, 0x28, 0x25, 0x24, 0x26,
+                             0x15, 0x13, 0x11, 0x18, 0x1e,
+                             0x1c, 0x00);
+       dsi_generic_write_seq(dsi, R69328_GAMMA_SET_B, 0x00,
+                             0x1a, 0x20, 0x28, 0x25, 0x24,
+                             0x26, 0x15, 0x13, 0x11, 0x18,
+                             0x1e, 0x1c, 0x00, 0x00, 0x1a,
+                             0x20, 0x28, 0x25, 0x24, 0x26,
+                             0x15, 0x13, 0x11, 0x18, 0x1e,
+                             0x1c, 0x00);
+       dsi_generic_write_seq(dsi, R69328_GAMMA_SET_C, 0x00,
+                             0x1a, 0x20, 0x28, 0x25, 0x24,
+                             0x26, 0x15, 0x13, 0x11, 0x18,
+                             0x1e, 0x1c, 0x00, 0x00, 0x1a,
+                             0x20, 0x28, 0x25, 0x24, 0x26,
+                             0x15, 0x13, 0x11, 0x18, 0x1e,
+                             0x1c, 0x00);
+
+       /* MACP On */
+       dsi_generic_write_seq(dsi, R69328_MACP, 0x03);
+
+       ret = mipi_dsi_dcs_set_display_on(dsi);
+       if (ret < 0) {
+               log_err("failed to set display on: %d\n", ret);
+               return ret;
+       }
+
+       mdelay(50);
+
+       ret = backlight_enable(priv->backlight);
+       if (ret)
+               return ret;
+
+       ret = backlight_set_brightness(priv->backlight, percent);
+       if (ret)
+               return ret;
+
+       return 0;
+}
+
+static int renesas_r69328_timings(struct udevice *dev,
+                                 struct display_timing *timing)
+{
+       memcpy(timing, &default_timing, sizeof(*timing));
+       return 0;
+}
+
+static int renesas_r69328_of_to_plat(struct udevice *dev)
+{
+       struct renesas_r69328_priv *priv = dev_get_priv(dev);
+       int ret;
+
+       ret = uclass_get_device_by_phandle(UCLASS_PANEL_BACKLIGHT, dev,
+                                          "backlight", &priv->backlight);
+       if (ret) {
+               log_err("cannot get backlight: ret = %d\n", ret);
+               return ret;
+       }
+
+       ret = gpio_request_by_name(dev, "enable-gpios", 0,
+                                  &priv->enable_gpio, GPIOD_IS_OUT);
+       if (ret) {
+               log_err("could not decode enable-gpios (%d)\n", ret);
+               return ret;
+       }
+
+       ret = gpio_request_by_name(dev, "reset-gpios", 0,
+                                  &priv->reset_gpio, GPIOD_IS_OUT);
+       if (ret) {
+               log_err("could not decode reser-gpios (%d)\n", ret);
+               return ret;
+       }
+
+       return 0;
+}
+
+static int renesas_r69328_probe(struct udevice *dev)
+{
+       struct mipi_dsi_panel_plat *plat = dev_get_plat(dev);
+
+       /* fill characteristics of DSI data link */
+       plat->lanes = 4;
+       plat->format = MIPI_DSI_FMT_RGB888;
+       plat->mode_flags = MIPI_DSI_MODE_VIDEO;
+
+       return 0;
+}
+
+static const struct panel_ops renesas_r69328_ops = {
+       .enable_backlight       = renesas_r69328_enable_backlight,
+       .set_backlight          = renesas_r69328_set_backlight,
+       .get_display_timing     = renesas_r69328_timings,
+};
+
+static const struct udevice_id renesas_r69328_ids[] = {
+       { .compatible = "jdi,dx12d100vm0eaa" },
+       { }
+};
+
+U_BOOT_DRIVER(renesas_r69328) = {
+       .name           = "renesas_r69328",
+       .id             = UCLASS_PANEL,
+       .of_match       = renesas_r69328_ids,
+       .ops            = &renesas_r69328_ops,
+       .of_to_plat     = renesas_r69328_of_to_plat,
+       .probe          = renesas_r69328_probe,
+       .plat_auto      = sizeof(struct mipi_dsi_panel_plat),
+       .priv_auto      = sizeof(struct renesas_r69328_priv),
+};