net: mvpp2: Drop PHY_INTERFACE_MODE_SGMII_2500 support

This mode does not seem to be well defined and used anywhere, remove support for it.
Based on discussion:
- 1000baseX does c37 AN of duplex+pause
- SGMII does AN of duplex+pause+speed, at lower speed bytes are repeated 10x/100x
- 2500baseX does not do AN, or does very different c73 AN
- SGMII 2500 behavior is unclear

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>

diff --git a/drivers/net/mvpp2.c b/drivers/net/mvpp2.c
index 1bad50d344c78d7633b25d93bd9d99c4ddfb8b0a..c99d52c85d72d01db5fa5a6c43d4726f03b07401 100644 (file)
--- a/drivers/net/mvpp2.c
+++ b/drivers/net/mvpp2.c
@@ -2871,7 +2871,6 @@ static void mvpp2_port_mii_set(struct mvpp2_port *port)
 
        switch (port->phy_interface) {
        case PHY_INTERFACE_MODE_SGMII:
-       case PHY_INTERFACE_MODE_SGMII_2500:
                val |= MVPP2_GMAC_INBAND_AN_MASK;
                break;
        case PHY_INTERFACE_MODE_1000BASEX:
@@ -2939,7 +2938,6 @@ static void mvpp2_port_loopback_set(struct mvpp2_port *port)
                val &= ~MVPP2_GMAC_GMII_LB_EN_MASK;
 
        if (port->phy_interface == PHY_INTERFACE_MODE_SGMII ||
-           port->phy_interface == PHY_INTERFACE_MODE_SGMII_2500 ||
            port->phy_interface == PHY_INTERFACE_MODE_1000BASEX ||
            port->phy_interface == PHY_INTERFACE_MODE_2500BASEX)
                val |= MVPP2_GMAC_PCS_LB_EN_MASK;
@@ -3027,48 +3025,6 @@ static int gop_bypass_clk_cfg(struct mvpp2_port *port, int en)
        return 0;
 }
 
-static void gop_gmac_sgmii2_5_cfg(struct mvpp2_port *port)
-{
-       u32 val, thresh;
-
-       /*
-        * Configure minimal level of the Tx FIFO before the lower part
-        * starts to read a packet
-        */
-       thresh = MVPP2_SGMII2_5_TX_FIFO_MIN_TH;
-       val = readl(port->base + MVPP2_GMAC_PORT_FIFO_CFG_1_REG);
-       val &= ~MVPP2_GMAC_TX_FIFO_MIN_TH_ALL_MASK;
-       val |= MVPP2_GMAC_TX_FIFO_MIN_TH_MASK(thresh);
-       writel(val, port->base + MVPP2_GMAC_PORT_FIFO_CFG_1_REG);
-
-       /* Disable bypass of sync module */
-       val = readl(port->base + MVPP2_GMAC_CTRL_4_REG);
-       val |= MVPP2_GMAC_CTRL4_SYNC_BYPASS_MASK;
-       /* configure DP clock select according to mode */
-       val |= MVPP2_GMAC_CTRL4_DP_CLK_SEL_MASK;
-       /* configure QSGMII bypass according to mode */
-       val |= MVPP2_GMAC_CTRL4_QSGMII_BYPASS_ACTIVE_MASK;
-       writel(val, port->base + MVPP2_GMAC_CTRL_4_REG);
-
-       val = readl(port->base + MVPP2_GMAC_CTRL_0_REG);
-       /*
-        * Configure GIG MAC to SGMII mode connected to a fiber
-        * transceiver
-        */
-       val &= ~MVPP2_GMAC_PORT_TYPE_MASK;
-       writel(val, port->base + MVPP2_GMAC_CTRL_0_REG);
-
-       /* configure AN 0x9268 */
-       val = MVPP2_GMAC_EN_PCS_AN |
-               MVPP2_GMAC_AN_BYPASS_EN |
-               MVPP2_GMAC_CONFIG_MII_SPEED  |
-               MVPP2_GMAC_CONFIG_GMII_SPEED     |
-               MVPP2_GMAC_FC_ADV_EN    |
-               MVPP2_GMAC_CONFIG_FULL_DUPLEX |
-               MVPP2_GMAC_CHOOSE_SAMPLE_TX_CONFIG;
-       writel(val, port->base + MVPP2_GMAC_AUTONEG_CONFIG);
-}
-
 static void gop_gmac_sgmii_cfg(struct mvpp2_port *port)
 {
        u32 val, thresh;
@@ -3239,9 +3195,6 @@ static int gop_gmac_mode_cfg(struct mvpp2_port *port)
        case PHY_INTERFACE_MODE_SGMII:
                gop_gmac_sgmii_cfg(port);
                break;
-       case PHY_INTERFACE_MODE_SGMII_2500:
-               gop_gmac_sgmii2_5_cfg(port);
-               break;
        case PHY_INTERFACE_MODE_1000BASEX:
                gop_gmac_1000basex_cfg(port);
                break;
@@ -3422,7 +3375,6 @@ static int gop_port_init(struct mvpp2_port *port)
                break;
 
        case PHY_INTERFACE_MODE_SGMII:
-       case PHY_INTERFACE_MODE_SGMII_2500:
        case PHY_INTERFACE_MODE_1000BASEX:
        case PHY_INTERFACE_MODE_2500BASEX:
                /* configure PCS */
@@ -3482,7 +3434,6 @@ static void gop_port_enable(struct mvpp2_port *port, int enable)
        case PHY_INTERFACE_MODE_RGMII:
        case PHY_INTERFACE_MODE_RGMII_ID:
        case PHY_INTERFACE_MODE_SGMII:
-       case PHY_INTERFACE_MODE_SGMII_2500:
        case PHY_INTERFACE_MODE_1000BASEX:
        case PHY_INTERFACE_MODE_2500BASEX:
                if (enable)
@@ -3519,7 +3470,6 @@ static u32 mvpp2_netc_cfg_create(int gop_id, phy_interface_t phy_type)
 
        if (gop_id == 2) {
                if (phy_type == PHY_INTERFACE_MODE_SGMII ||
-                   phy_type == PHY_INTERFACE_MODE_SGMII_2500 ||
                    phy_type == PHY_INTERFACE_MODE_1000BASEX ||
                    phy_type == PHY_INTERFACE_MODE_2500BASEX)
                        val |= MV_NETC_GE_MAC2_SGMII;
@@ -3530,7 +3480,6 @@ static u32 mvpp2_netc_cfg_create(int gop_id, phy_interface_t phy_type)
 
        if (gop_id == 3) {
                if (phy_type == PHY_INTERFACE_MODE_SGMII ||
-                   phy_type == PHY_INTERFACE_MODE_SGMII_2500 ||
                    phy_type == PHY_INTERFACE_MODE_1000BASEX ||
                    phy_type == PHY_INTERFACE_MODE_2500BASEX)
                        val |= MV_NETC_GE_MAC3_SGMII;
@@ -4529,7 +4478,6 @@ static void mvpp2_start_dev(struct mvpp2_port *port)
        case PHY_INTERFACE_MODE_RGMII:
        case PHY_INTERFACE_MODE_RGMII_ID:
        case PHY_INTERFACE_MODE_SGMII:
-       case PHY_INTERFACE_MODE_SGMII_2500:
        case PHY_INTERFACE_MODE_1000BASEX:
        case PHY_INTERFACE_MODE_2500BASEX:
                mvpp2_gmac_max_rx_size_set(port);
@@ -5263,7 +5211,6 @@ static int mvpp2_start(struct udevice *dev)
        case PHY_INTERFACE_MODE_RGMII:
        case PHY_INTERFACE_MODE_RGMII_ID:
        case PHY_INTERFACE_MODE_SGMII:
-       case PHY_INTERFACE_MODE_SGMII_2500:
        case PHY_INTERFACE_MODE_1000BASEX:
        case PHY_INTERFACE_MODE_2500BASEX:
                mvpp2_port_power_up(port);