The phycore-am64x can be migrated to OF_UPSTREAM.
Drop redundant device tree files, update MAINTAINERS and
defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly.
While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB
& SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
dtb-$(CONFIG_SOC_K3_AM642) += k3-am642-r5-evm.dtb \
k3-am642-r5-sk.dtb \
- k3-am642-phyboard-electra-rdk.dtb \
k3-am642-r5-phycore-som-2gb.dtb
dtb-$(CONFIG_SOC_K3_AM625) += k3-am625-sk.dtb \
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2021 PHYTEC America, LLC - https://www.phytec.com
- * Author: Matt McKee <mmckee@phytec.com>
- *
- * Copyright (C) 2022 PHYTEC Messtechnik GmbH
- * Author: Wadim Egorov <w.egorov@phytec.de>
- *
- * Product homepage:
- * https://www.phytec.com/product/phycore-am64x
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/net/ti-dp83867.h>
-
-/ {
- model = "PHYTEC phyCORE-AM64x";
- compatible = "phytec,am64-phycore-som", "ti,am642";
-
- aliases {
- ethernet0 = &cpsw_port1;
- mmc0 = &sdhci0;
- rtc0 = &i2c_som_rtc;
- };
-
- memory@80000000 {
- device_type = "memory";
- reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
- };
-
- reserved_memory: reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- secure_ddr: optee@9e800000 {
- reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
- alignment = <0x1000>;
- no-map;
- };
-
- main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa0000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa0100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3100000 0x00 0xf00000>;
- no-map;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&leds_pins_default>;
-
- led-0 {
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&main_gpio0 12 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- function = LED_FUNCTION_HEARTBEAT;
- };
- };
-
- vcc_5v0_som: regulator-vcc-5v0-som {
- /* VIN / VCC_5V0_SOM */
- compatible = "regulator-fixed";
- regulator-name = "VCC_5V0_SOM";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-};
-
-&main_pmx0 {
- cpsw_mdio_pins_default: cpsw-mdio-default-pins {
- pinctrl-single,pins = <
- AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
- AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */
- AM64X_IOPAD(0x0100, PIN_OUTPUT, 7) /* (V7) PRG1_PRU0_GPO18.GPIO0_63 */
- >;
- };
-
- cpsw_rgmii1_pins_default: cpsw-rgmii1-default-pins {
- pinctrl-single,pins = <
- AM64X_IOPAD(0x0184, PIN_INPUT, 4) /* (W6) PRG0_PRU0_GPO9.RGMII1_RX_CTL */
- AM64X_IOPAD(0x0188, PIN_INPUT, 4) /* (AA5) PRG0_PRU0_GPO10.RGMII1_RXC */
- AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */
- AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */
- AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */
- AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */
- AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */
- AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */
- AM64X_IOPAD(0x01d8, PIN_INPUT, 4) /* (V6) PRG0_PRU1_GPO10.RGMII1_RD2 */
- AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */
- AM64X_IOPAD(0x01f4, PIN_INPUT, 4) /* (V5) PRG0_PRU1_GPO17.RGMII1_RD3 */
- AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */
- AM64X_IOPAD(0x0154, PIN_INPUT, 7) /* (V12) PRG1_PRU1_GPO19.GPIO0_84 */
- >;
- };
-
- eeprom_wp_pins_default: eeprom-wp-default-pins {
- pinctrl-single,pins = <
- AM64X_IOPAD(0x0208, PIN_OUTPUT, 7) /* (D12) SPI0_CS0.GPIO1_42 */
- >;
- };
-
- leds_pins_default: leds-default-pins {
- pinctrl-single,pins = <
- AM64X_IOPAD(0x0030, PIN_OUTPUT, 7) /* (L18) OSPI0_CSn1.GPIO0_12 */
- >;
- };
-
- main_i2c0_pins_default: main-i2c0-default-pins {
- pinctrl-single,pins = <
- AM64X_IOPAD(0x0260, PIN_INPUT, 0) /* (A18) I2C0_SCL */
- AM64X_IOPAD(0x0264, PIN_INPUT, 0) /* (B18) I2C0_SDA */
- >;
- };
-
- ospi0_pins_default: ospi0-default-pins {
- pinctrl-single,pins = <
- AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */
- AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */
- AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */
- AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */
- AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */
- AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */
- AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */
- AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */
- AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */
- AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */
- AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */
- >;
- };
-
- rtc_pins_default: rtc-defaults-pins {
- pinctrl-single,pins = <
- AM64X_IOPAD(0x0278, PIN_INPUT, 7) /* (C19) EXTINTn.GPIO1_70 */
- >;
- };
-};
-
-&cpsw3g {
- pinctrl-names = "default";
- pinctrl-0 = <&cpsw_rgmii1_pins_default>;
-};
-
-&cpsw3g_mdio {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&cpsw_mdio_pins_default>;
-
- cpsw3g_phy1: ethernet-phy@1 {
- compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- interrupt-parent = <&main_gpio0>;
- interrupts = <84 IRQ_TYPE_EDGE_FALLING>;
- ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
- ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
- reset-gpios = <&main_gpio0 63 GPIO_ACTIVE_LOW>;
- reset-assert-us = <1000>;
- reset-deassert-us = <1000>;
- };
-};
-
-&cpsw_port1 {
- phy-mode = "rgmii-rxid";
- phy-handle = <&cpsw3g_phy1>;
-};
-
-&cpsw_port2 {
- status = "disabled";
-};
-
-&mailbox0_cluster2 {
- status = "okay";
-
- mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
- ti,mbox-rx = <0 0 2>;
- ti,mbox-tx = <1 0 2>;
- };
-
- mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
- ti,mbox-rx = <2 0 2>;
- ti,mbox-tx = <3 0 2>;
- };
-};
-
-&mailbox0_cluster4 {
- status = "okay";
-
- mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
- ti,mbox-rx = <0 0 2>;
- ti,mbox-tx = <1 0 2>;
- };
-
- mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
- ti,mbox-rx = <2 0 2>;
- ti,mbox-tx = <3 0 2>;
- };
-};
-
-&main_i2c0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_i2c0_pins_default>;
- clock-frequency = <400000>;
-
- eeprom@50 {
- compatible = "atmel,24c32";
- pinctrl-names = "default";
- pinctrl-0 = <&eeprom_wp_pins_default>;
- pagesize = <32>;
- reg = <0x50>;
- };
-
- i2c_som_rtc: rtc@52 {
- compatible = "microcrystal,rv3028";
- reg = <0x52>;
- pinctrl-names = "default";
- pinctrl-0 = <&rtc_pins_default>;
- interrupt-parent = <&main_gpio1>;
- interrupts = <70 IRQ_TYPE_EDGE_FALLING>;
- wakeup-source;
- };
-};
-
-&main_r5fss0_core0 {
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
- memory-region = <&main_r5fss0_core0_dma_memory_region>,
- <&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
- memory-region = <&main_r5fss0_core1_dma_memory_region>,
- <&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
- mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
- memory-region = <&main_r5fss1_core0_dma_memory_region>,
- <&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
- mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
- memory-region = <&main_r5fss1_core1_dma_memory_region>,
- <&main_r5fss1_core1_memory_region>;
-};
-
-&ospi0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&ospi0_pins_default>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0x0>;
- spi-tx-bus-width = <8>;
- spi-rx-bus-width = <8>;
- spi-max-frequency = <25000000>;
- cdns,tshsl-ns = <60>;
- cdns,tsd2d-ns = <60>;
- cdns,tchsh-ns = <60>;
- cdns,tslch-ns = <60>;
- cdns,read-delay = <0>;
- };
-};
-
-&sdhci0 {
- status = "okay";
- bus-width = <8>;
- non-removable;
- ti,driver-strength-ohm = <50>;
- disable-wp;
- keep-power-in-suspend;
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2021 PHYTEC America, LLC - https://www.phytec.com
- * Author: Matt McKee <mmckee@phytec.com>
- *
- * Copyright (C) 2022 PHYTEC Messtechnik GmbH
- * Author: Wadim Egorov <w.egorov@phytec.de>
- *
- * Product homepage:
- * https://www.phytec.com/product/phyboard-am64x
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/leds/leds-pca9532.h>
-#include <dt-bindings/phy/phy.h>
-#include "k3-am642.dtsi"
-#include "k3-am64-phycore-som.dtsi"
-
-#include "k3-serdes.h"
-
-/ {
- compatible = "phytec,am642-phyboard-electra-rdk",
- "phytec,am64-phycore-som", "ti,am642";
- model = "PHYTEC phyBOARD-Electra-AM64x RDK";
-
- aliases {
- mmc1 = &sdhci1;
- serial2 = &main_uart0;
- serial3 = &main_uart1;
- };
-
- chosen {
- stdout-path = &main_uart0;
- };
-
- can_tc1: can-phy0 {
- compatible = "ti,tcan1042";
- pinctrl-names = "default";
- pinctrl-0 = <&can_tc1_pins_default>;
- #phy-cells = <0>;
- max-bitrate = <5000000>;
- standby-gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>;
- };
-
- can_tc2: can-phy1 {
- compatible = "ti,tcan1042";
- pinctrl-names = "default";
- pinctrl-0 = <&can_tc2_pins_default>;
- #phy-cells = <0>;
- max-bitrate = <5000000>;
- standby-gpios = <&main_gpio0 35 GPIO_ACTIVE_HIGH>;
- };
-
- keys {
- compatible = "gpio-keys";
- autorepeat;
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_keys_pins_default>;
-
- key-home {
- label = "home";
- linux,code = <KEY_HOME>;
- gpios = <&main_gpio0 17 GPIO_ACTIVE_HIGH>;
- };
-
- key-menu {
- label = "menu";
- linux,code = <KEY_MENU>;
- gpios = <&main_gpio0 21 GPIO_ACTIVE_HIGH>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&leds_pins_default>, <&user_leds_pins_default>;
-
- led-1 {
- color = <LED_COLOR_ID_RED>;
- gpios = <&main_gpio0 15 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "mmc0";
- function = LED_FUNCTION_DISK;
- };
-
- led-2 {
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&main_gpio0 16 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "mmc1";
- function = LED_FUNCTION_DISK;
- };
- };
-
- vcc_3v3_mmc: regulator-sd {
- /* TPS22963C */
- compatible = "regulator-fixed";
- regulator-name = "VCC_3V3_MMC";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-};
-
-&main_pmx0 {
- can_tc1_pins_default: can-tc1-default-pins {
- pinctrl-single,pins = <
- AM64X_IOPAD(0x0084, PIN_OUTPUT, 7) /* (P16) GPMC0_ADVn_ALE.GPIO0_32 */
- >;
- };
-
- can_tc2_pins_default: can-tc2-default-pins {
- pinctrl-single,pins = <
- AM64X_IOPAD(0x0090, PIN_OUTPUT, 7) /* (P17) GPMC0_BE0n_CLE.GPIO0_35 */
- >;
- };
-
- gpio_keys_pins_default: gpio-keys-default-pins {
- pinctrl-single,pins = <
- AM64X_IOPAD(0x0044, PIN_INPUT, 7) /* (T18) GPMC0_AD2.GPIO0_17 */
- AM64X_IOPAD(0x0054, PIN_INPUT, 7) /* (V20) GPMC0_AD6.GPIO0_21 */
- >;
- };
-
- main_i2c1_pins_default: main-i2c1-default-pins {
- pinctrl-single,pins = <
- AM64X_IOPAD(0x0268, PIN_INPUT, 0) /* (C18) I2C1_SCL */
- AM64X_IOPAD(0x026c, PIN_INPUT, 0) /* (B19) I2C1_SDA */
- >;
- };
-
- main_mcan0_pins_default: main-mcan0-default-pins {
- pinctrl-single,pins = <
- AM64X_IOPAD(0x0250, PIN_OUTPUT, 0) /* (A17) MCAN0_TX */
- AM64X_IOPAD(0x0254, PIN_INPUT, 0) /* (B17) MCAN0_RX */
- >;
- };
-
- main_mcan1_pins_default: main-mcan1-default-pins {
- pinctrl-single,pins = <
- AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (C17) MCAN1_TX */
- AM64X_IOPAD(0x025c, PIN_INPUT, 0) /* (D17) MCAN1_RX */
- >;
- };
-
- main_mmc1_pins_default: main-mmc1-default-pins {
- pinctrl-single,pins = <
- AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */
- AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */
- AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* (L21) MMC1_DAT1 */
- AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* (K21) MMC1_DAT0 */
- AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */
- AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* MMC1_CLKLB */
- AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */
- AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */
- >;
- };
-
- main_uart0_pins_default: main-uart0-default-pins {
- pinctrl-single,pins = <
- AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */
- AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */
- >;
- };
-
- main_uart1_pins_default: main-uart1-default-pins {
- pinctrl-single,pins = <
- AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */
- AM64X_IOPAD(0x024C, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */
- AM64X_IOPAD(0x0240, PIN_INPUT, 0) /* (E15) UART1_RXD */
- AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */
- >;
- };
-
- main_usb0_pins_default: main-usb0-default-pins {
- pinctrl-single,pins = <
- AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */
- >;
- };
-
- pcie_usb_sel_pins_default: pcie-usb-sel-default-pins {
- pinctrl-single,pins = <
- AM64X_IOPAD(0x017c, PIN_OUTPUT, 7) /* (T1) PRG0_PRU0_GPO7.GPIO1_7 */
- >;
- };
-
- pcie0_pins_default: pcie0-default-pins {
- pinctrl-single,pins = <
- AM64X_IOPAD(0x0098, PIN_OUTPUT, 7) /* (W19) GPMC0_WAIT0.GPIO0_37 */
- >;
- };
-
- user_leds_pins_default: user-leds-default-pins {
- pinctrl-single,pins = <
- AM64X_IOPAD(0x003c, PIN_OUTPUT, 7) /* (T20) GPMC0_AD0.GPIO0_15 */
- AM64X_IOPAD(0x0040, PIN_OUTPUT, 7) /* (U21) GPMC0_AD1.GPIO0_16 */
- >;
- };
-};
-
-&main_i2c1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_i2c1_pins_default>;
- clock-frequency = <400000>;
-
- eeprom@51 {
- compatible = "atmel,24c02";
- pagesize = <16>;
- reg = <0x51>;
- };
-
- led-controller@62 {
- compatible = "nxp,pca9533";
- reg = <0x62>;
-
- led-3 {
- label = "red:user";
- type = <PCA9532_TYPE_LED>;
- };
-
- led-4 {
- label = "green:user";
- type = <PCA9532_TYPE_LED>;
- };
-
- led-5 {
- label = "blue:user";
- type = <PCA9532_TYPE_LED>;
- };
- };
-};
-
-&main_mcan0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_mcan0_pins_default>;
- phys = <&can_tc1>;
-};
-
-&main_mcan1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_mcan1_pins_default>;
- phys = <&can_tc2>;
-};
-
-&main_uart0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_uart0_pins_default>;
- current-speed = <115200>;
-};
-
-&main_uart1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_uart1_pins_default>;
- uart-has-rtscts;
- current-speed = <115200>;
-};
-
-&sdhci1 {
- status = "okay";
- vmmc-supply = <&vcc_3v3_mmc>;
- pinctrl-names = "default";
- pinctrl-0 = <&main_mmc1_pins_default>;
- bus-width = <4>;
- ti,driver-strength-ohm = <50>;
- disable-wp;
- no-1-8-v;
-};
-
-&serdes0 {
- serdes0_pcie_usb_link: phy@0 {
- reg = <0>;
- cdns,num-lanes = <1>;
- #phy-cells = <0>;
- cdns,phy-type = <PHY_TYPE_USB3>;
- resets = <&serdes_wiz0 1>;
- };
-};
-
-&serdes_ln_ctrl {
- idle-states = <AM64_SERDES0_LANE0_USB>;
-};
-
-&usbss0 {
- ti,vbus-divider;
-};
-
-&usb0 {
- pinctrl-names = "default";
- pinctrl-0 = <&main_usb0_pins_default>;
- dr_mode = "host";
- maximum-speed = "super-speed";
- phys = <&serdes0_pcie_usb_link>;
- phy-names = "cdns3,usb3-phy";
-};
#endif
#ifdef CONFIG_TARGET_PHYCORE_AM64X_A53
-#define SPL_AM642_PHYBOARD_ELECTRA_DTB "spl/dts/k3-am642-phyboard-electra-rdk.dtb"
+#define SPL_AM642_PHYBOARD_ELECTRA_DTB "spl/dts/ti/k3-am642-phyboard-electra-rdk.dtb"
#define AM642_PHYBOARD_ELECTRA_DTB "u-boot.dtb"
&binman {
#ifdef CONFIG_TARGET_PHYCORE_AM64X_A53
-#define SPL_AM642_PHYBOARD_ELECTRA_DTB "spl/dts/k3-am642-phyboard-electra-rdk.dtb"
-
-#define AM642_PHYBOARD_ELECTRA_DTB "u-boot.dtb"
-
&binman {
ti-spl {
insert-template = <&ti_spl_template>;
select BINMAN
imply BOARD
imply SPL_BOARD
+ imply OF_UPSTREAM
config TARGET_PHYCORE_AM64X_R5
bool "PHYTEC phyCORE-AM64x running on R5"
W: https://www.phytec.com/product/phycore-am64x
S: Maintained
F: arch/arm/dts/k3-am64-phycore-som-ddr4-2gb.dtsi
-F: arch/arm/dts/k3-am64-phycore-som.dtsi
F: arch/arm/dts/k3-am642-phyboard-electra-rdk-u-boot.dtsi
-F: arch/arm/dts/k3-am642-phyboard-electra-rdk.dts
F: arch/arm/dts/k3-am642-phycore-som-binman.dtsi
F: arch/arm/dts/k3-am642-r5-phycore-som-2gb.dts
F: board/phytec/phycore_am64x
CONFIG_ENV_OFFSET=0xFFFFD000
CONFIG_DM_GPIO=y
CONFIG_SPL_DM_SPI=y
-CONFIG_DEFAULT_DEVICE_TREE="k3-am642-phyboard-electra-rdk"
+CONFIG_DEFAULT_DEVICE_TREE="ti/k3-am642-phyboard-electra-rdk"
CONFIG_SPL_TEXT_BASE=0x80080000
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_DM_RESET=y
projects / u-boot.git / commitdiff
