ARM: legoev3: Move UART enable to early init

This moves the UART init for LEGO MINDSTORMS EV3 to board_early_init_f().
Some console messages were not being printed because the UART was not
enabled until later in the init process.

Signed-off-by: David Lechner <david@lechnology.com>

diff --git a/board/lego/ev3/legoev3.c b/board/lego/ev3/legoev3.c
index 5e70363588d75e591da971e2998255c819d1847f..69010055d3a97fd999eac2c1589360cbc4b6de8e 100644 (file)
--- a/board/lego/ev3/legoev3.c
+++ b/board/lego/ev3/legoev3.c
@@ -132,6 +132,11 @@ void get_board_serial(struct tag_serialnr *serialnr)
 
 int board_early_init_f(void)
 {
+       /* enable the console UART */
+       writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
+               DAVINCI_UART_PWREMU_MGMT_UTRST),
+              &davinci_uart1_ctrl_regs->pwremu_mgmt);
+
        /*
         * Power on required peripherals
         * ARM does not have access by default to PSC0 and PSC1
@@ -166,10 +171,5 @@ int board_init(void)
        if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes)))
                return 1;
 
-       /* enable the console UART */
-       writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
-               DAVINCI_UART_PWREMU_MGMT_UTRST),
-              &davinci_uart1_ctrl_regs->pwremu_mgmt);
-
        return 0;
 }