zynq: timer: Migrate to zynq clock framework

Remove hardcoded frequencies in favor of Zynq clock framework.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/arch/arm/cpu/armv7/zynq/timer.c b/arch/arm/cpu/armv7/zynq/timer.c
index 2be253c2c3d5ec29d2e7a50da9542701728d0340..78e30a6ddcf94f8ef7c26d0f6fa84b2753133392 100644 (file)
--- a/arch/arm/cpu/armv7/zynq/timer.c
+++ b/arch/arm/cpu/armv7/zynq/timer.c
@@ -29,6 +29,7 @@
 #include <div64.h>
 #include <asm/io.h>
 #include <asm/arch/hardware.h>
+#include <asm/arch/clk.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -48,7 +49,6 @@ static struct scu_timer *timer_base =
 
 #define TIMER_LOAD_VAL 0xFFFFFFFF
 #define TIMER_PRESCALE 255
-#define TIMER_TICK_HZ  (CONFIG_CPU_FREQ_HZ / 2 / TIMER_PRESCALE)
 
 int timer_init(void)
 {
@@ -56,6 +56,8 @@ int timer_init(void)
                        (TIMER_PRESCALE << SCUTIMER_CONTROL_PRESCALER_SHIFT) |
                        SCUTIMER_CONTROL_ENABLE_MASK;
 
+       gd->arch.timer_rate_hz = (gd->cpu_clk / 2) / TIMER_PRESCALE;
+
        /* Load the timer counter register */
        writel(0xFFFFFFFF, &timer_base->load);
 
@@ -69,7 +71,7 @@ int timer_init(void)
 
        /* Reset time */
        gd->arch.lastinc = readl(&timer_base->counter) /
-                                       (TIMER_TICK_HZ / CONFIG_SYS_HZ);
+                               (gd->arch.timer_rate_hz / CONFIG_SYS_HZ);
        gd->arch.tbl = 0;
 
        return 0;
@@ -83,7 +85,8 @@ ulong get_timer_masked(void)
 {
        ulong now;
 
-       now = readl(&timer_base->counter) / (TIMER_TICK_HZ / CONFIG_SYS_HZ);
+       now = readl(&timer_base->counter) /
+                       (gd->arch.timer_rate_hz / CONFIG_SYS_HZ);
 
        if (gd->arch.lastinc >= now) {
                /* Normal mode */
@@ -107,7 +110,7 @@ void __udelay(unsigned long usec)
        if (usec == 0)
                return;
 
-       countticks = lldiv(TIMER_TICK_HZ * usec, 1000000);
+       countticks = lldiv(gd->arch.timer_rate_hz * usec, 1000000);
 
        /* decrementing timer */
        timeend = readl(&timer_base->counter) - countticks;