Clarify CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW in Kconfig

This is a "hex" prompt but the default value was given as an int.
Switch the default to hex (0x0) and remove the defconfigs that were
using the default, but as hex before.

Signed-off-by: Tom Rini <trini@konsulko.com>

diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig
index 54029adba4a94365fa0448ef07cfce8a65a04ed2..3f59b99faf76624688560114ae2090ec6bea7b01 100644 (file)
--- a/configs/imx6q_logic_defconfig
+++ b/configs/imx6q_logic_defconfig
@@ -77,7 +77,6 @@ CONFIG_LED_GPIO=y
 CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
 CONFIG_FSL_USDHC=y
 CONFIG_MTD=y
 CONFIG_DM_MTD=y

diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig
index 82a52e283550e34d2d933b5c8ffc54b8cfef81fb..ff28488ca2f6d0d3a3225fd47dd49259fc085435 100644 (file)
--- a/configs/phycore-imx8mm_defconfig
+++ b/configs/phycore-imx8mm_defconfig
@@ -76,7 +76,6 @@ CONFIG_DM_I2C=y
 CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x51
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y

diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig
index 367f0d751c02000355d8a3beffb61022e3bf4f83..ceb3c20bc515a0b084aa32df714570d324f620c6 100644 (file)
--- a/configs/phycore-imx8mp_defconfig
+++ b/configs/phycore-imx8mp_defconfig
@@ -77,7 +77,6 @@ CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x51
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y

diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig
index f0ec2639a388830c5bc2a1307c33478e0baa3916..711439b2413ab527ba02a121af6f763690d9afe1 100644 (file)
--- a/configs/xilinx_versal_virt_defconfig
+++ b/configs/xilinx_versal_virt_defconfig
@@ -63,7 +63,6 @@ CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_CADENCE=y
 CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y

diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig
index f343430f5d07405a1955a24ae76079c4bae23a0c..64efb69cfb7fc1d8e0f4704a531e91a231903f97 100644 (file)
--- a/configs/xilinx_zynq_virt_defconfig
+++ b/configs/xilinx_zynq_virt_defconfig
@@ -84,7 +84,6 @@ CONFIG_LED=y
 CONFIG_LED_GPIO=y
 CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_MTD=y

diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
index 687b41bfb148ea6384ffffe9262e3a1603afa46c..dc845899d1713d0a6d14fdfbd74245fe363b6242 100644 (file)
--- a/configs/xilinx_zynqmp_virt_defconfig
+++ b/configs/xilinx_zynqmp_virt_defconfig
@@ -124,7 +124,6 @@ CONFIG_LED=y
 CONFIG_LED_GPIO=y
 CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 3bae072005839690123a1bdd34f8ebbd6d1b8b5a..33a8259254414b6b8e4128998b997da8db4321a6 100644 (file)
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -416,7 +416,7 @@ if I2C_EEPROM
 
 config SYS_I2C_EEPROM_ADDR_OVERFLOW
        hex "EEPROM Address Overflow"
-       default 0
+       default 0x0
        help
          EEPROM chips that implement "address overflow" are ones
          like Catalyst 24WC04/08/16 which has 9/10/11 bits of