/*
* SoC configurations
*/
-#define CONFIG_MX28 /* i.MX28 SoC */
-#define CONFIG_MXS_GPIO /* GPIO control */
-#define CONFIG_SYS_HZ 1000 /* Ticks per second */
+#define CONFIG_MX28 /* i.MX28 SoC */
+#define CONFIG_MXS_GPIO /* GPIO control */
+#define CONFIG_SYS_HZ 1000 /* Ticks per second */
/*
* Define M28EVK machine type by hand until it lands in mach-types
*/
-#define MACH_TYPE_M28EVK 3613
+#define MACH_TYPE_M28EVK 3613
-#define CONFIG_MACH_TYPE MACH_TYPE_M28EVK
+#define CONFIG_MACH_TYPE MACH_TYPE_M28EVK
#include <asm/arch/regs-base.h>
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_ARCH_MISC_INIT
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_ARCH_MISC_INIT
/*
* SPL
*/
-#define CONFIG_SPL
-#define CONFIG_SPL_NO_CPU_SUPPORT_CODE
-#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs"
-#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL
+#define CONFIG_SPL_NO_CPU_SUPPORT_CODE
+#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
/*
* U-Boot Commands
*/
#include <config_cmd_default.h>
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DOS_PARTITION
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_GPIO
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SETEXPR
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_USB
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_USB
/*
* Memory configurations
*/
-#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x40000000 /* Base address */
-#define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */
-#define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */
-#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Initial data */
-#define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest start adr */
-#define CONFIG_SYS_MEMTEST_END 0x40400000 /* 4 MB RAM test */
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
+#define PHYS_SDRAM_1 0x40000000 /* Base address */
+#define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */
+#define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Initial data */
+#define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest start adr */
+#define CONFIG_SYS_MEMTEST_END 0x40400000 /* 4 MB RAM test */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
/* Point initial SP in SRAM so SPL can use it too. */
#define CONFIG_SYS_INIT_RAM_ADDR 0x00000000
* strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot
* binary. In case there was more of this mess, 0x100 bytes are skipped.
*/
-#define CONFIG_SYS_TEXT_BASE 0x40000100
+#define CONFIG_SYS_TEXT_BASE 0x40000100
/*
* U-Boot general configurations
*/
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT "=> "
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
-#define CONFIG_SYS_PBSIZE \
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT "=> "
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
+#define CONFIG_SYS_PBSIZE \
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
/* Print buffer size */
-#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/* Boot argument buffer size */
-#define CONFIG_VERSION_VARIABLE /* U-BOOT version */
-#define CONFIG_AUTO_COMPLETE /* Command auto complete */
-#define CONFIG_CMDLINE_EDITING /* Command history etc */
-#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_VERSION_VARIABLE /* U-BOOT version */
+#define CONFIG_AUTO_COMPLETE /* Command auto complete */
+#define CONFIG_CMDLINE_EDITING /* Command history etc */
+#define CONFIG_SYS_HUSH_PARSER
/*
* Serial Driver
*/
-#define CONFIG_PL011_SERIAL
-#define CONFIG_PL011_CLOCK 24000000
-#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE }
-#define CONFIG_CONS_INDEX 0
-#define CONFIG_BAUDRATE 115200 /* Default baud rate */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK 24000000
+#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE }
+#define CONFIG_CONS_INDEX 0
+#define CONFIG_BAUDRATE 115200 /* Default baud rate */
/*
* MMC Driver
*/
#ifdef CONFIG_CMD_MMC
-#define CONFIG_MMC
-#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MXS_MMC
+#define CONFIG_MMC
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MXS_MMC
#endif
/*
/*
* NAND
*/
-#define CONFIG_ENV_SIZE (16 * 1024)
+#define CONFIG_ENV_SIZE (16 * 1024)
#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_MXS
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x60000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_NAND_MXS
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x60000000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
/* Environment is in NAND */
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-#define CONFIG_ENV_SECT_SIZE (128 * 1024)
-#define CONFIG_ENV_RANGE (512 * 1024)
-#define CONFIG_ENV_OFFSET 0x300000
-#define CONFIG_ENV_OFFSET_REDUND \
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
+#define CONFIG_ENV_SECT_SIZE (128 * 1024)
+#define CONFIG_ENV_RANGE (512 * 1024)
+#define CONFIG_ENV_OFFSET 0x300000
+#define CONFIG_ENV_OFFSET_REDUND \
(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-#define MTDIDS_DEFAULT "nand0=gpmi-nand"
-#define MTDPARTS_DEFAULT \
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define MTDIDS_DEFAULT "nand0=gpmi-nand"
+#define MTDPARTS_DEFAULT \
"mtdparts=gpmi-nand:" \
"3m(bootloader)ro," \
"512k(environment)," \
"8m(ramdisk)," \
"-(filesystem)"
#else
-#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_IS_NOWHERE
#endif
/*
* Ethernet on SOC (FEC)
*/
#ifdef CONFIG_CMD_NET
-#define CONFIG_ETHPRIME "FEC0"
-#define CONFIG_FEC_MXC
-#define CONFIG_MII
-#define CONFIG_FEC_XCV_TYPE RMII
+#define CONFIG_ETHPRIME "FEC0"
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define CONFIG_FEC_XCV_TYPE RMII
#endif
/*
* I2C
*/
#ifdef CONFIG_CMD_I2C
-#define CONFIG_I2C_MXS
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 400000
+#define CONFIG_I2C_MXS
+#define CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C_SPEED 400000
#endif
/*
* EEPROM
*/
#ifdef CONFIG_CMD_EEPROM
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#endif
/*
*/
#ifdef CONFIG_CMD_DATE
/* Use the internal RTC in the MXS chip */
-#define CONFIG_RTC_INTERNAL
+#define CONFIG_RTC_INTERNAL
#ifdef CONFIG_RTC_INTERNAL
-#define CONFIG_RTC_MXS
+#define CONFIG_RTC_MXS
#else
-#define CONFIG_RTC_M41T62
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-#define CONFIG_SYS_M41T11_BASE_YEAR 2000
+#define CONFIG_RTC_M41T62
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+#define CONFIG_SYS_M41T11_BASE_YEAR 2000
#endif
#endif
* USB
*/
#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MXS
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MXS
#define CONFIG_EHCI_MXS_PORT0
#define CONFIG_EHCI_MXS_PORT1
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#define CONFIG_EHCI_IS_TDI
-#define CONFIG_USB_STORAGE
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
#endif
/*
* SPI
*/
#ifdef CONFIG_CMD_SPI
-#define CONFIG_HARD_SPI
-#define CONFIG_MXS_SPI
-#define CONFIG_SPI_HALF_DUPLEX
-#define CONFIG_DEFAULT_SPI_BUS 2
-#define CONFIG_DEFAULT_SPI_CS 0
-#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0
+#define CONFIG_HARD_SPI
+#define CONFIG_MXS_SPI
+#define CONFIG_SPI_HALF_DUPLEX
+#define CONFIG_DEFAULT_SPI_BUS 2
+#define CONFIG_DEFAULT_SPI_CS 0
+#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0
/* SPI FLASH */
#ifdef CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SF_DEFAULT_BUS 2
-#define CONFIG_SF_DEFAULT_CS 0
-#define CONFIG_SF_DEFAULT_SPEED 40000000
-#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SF_DEFAULT_BUS 2
+#define CONFIG_SF_DEFAULT_CS 0
+#define CONFIG_SF_DEFAULT_SPEED 40000000
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
-#define CONFIG_ENV_SPI_BUS 2
-#define CONFIG_ENV_SPI_CS 0
-#define CONFIG_ENV_SPI_MAX_HZ 40000000
-#define CONFIG_ENV_SPI_MODE SPI_MODE_0
+#define CONFIG_ENV_SPI_BUS 2
+#define CONFIG_ENV_SPI_CS 0
+#define CONFIG_ENV_SPI_MAX_HZ 40000000
+#define CONFIG_ENV_SPI_MODE SPI_MODE_0
#endif
#endif
/*
* Boot Linux
*/
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTFILE "uImage"
-#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 "
-#define CONFIG_BOOTCOMMAND "run bootcmd_net"
-#define CONFIG_LOADADDR 0x42000000
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_OF_LIBFDT
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTFILE "uImage"
+#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 "
+#define CONFIG_BOOTCOMMAND "run bootcmd_net"
+#define CONFIG_LOADADDR 0x42000000
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+#define CONFIG_OF_LIBFDT
/*
* Extra Environments
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CONFIG_EXTRA_ENV_SETTINGS \
"update_nand_full_filename=u-boot.nand\0" \
"update_nand_firmware_filename=u-boot.sb\0" \
"update_sd_firmware_filename=u-boot.sd\0" \
projects / u-boot.git / commitdiff
