arm64: zynqmp: Fix addresses in partition definitions

Node name should be <name>@<address> which is not how partitions are
described.

Issue was found by running dtbs_check as:
flash@0: 'partition@qspi-device-tree', 'partition@qspi-fsbl-uboot',
'partition@qspi-linux', 'partition@qspi-rootfs'
do not match any of the regexes: ...

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/arch/arm/dts/zynqmp-zc1232-revA.dts b/arch/arm/dts/zynqmp-zc1232-revA.dts
index 87152afc32f5467b2cb750e515304e3a48530620..afb3e96520b83fcd472757643e4bded2a0f21b14 100644 (file)
--- a/arch/arm/dts/zynqmp-zc1232-revA.dts
+++ b/arch/arm/dts/zynqmp-zc1232-revA.dts
@@ -48,19 +48,19 @@
                spi-tx-bus-width = <1>;
                spi-rx-bus-width = <4>;
                spi-max-frequency = <108000000>; /* Based on DC1 spec */
-               partition@qspi-fsbl-uboot { /* for testing purpose */
+               partition@0 { /* for testing purpose */
                        label = "qspi-fsbl-uboot";
                        reg = <0x0 0x100000>;
                };
-               partition@qspi-linux { /* for testing purpose */
+               partition@100000 { /* for testing purpose */
                        label = "qspi-linux";
                        reg = <0x100000 0x500000>;
                };
-               partition@qspi-device-tree { /* for testing purpose */
+               partition@600000 { /* for testing purpose */
                        label = "qspi-device-tree";
                        reg = <0x600000 0x20000>;
                };
-               partition@qspi-rootfs { /* for testing purpose */
+               partition@620000 { /* for testing purpose */
                        label = "qspi-rootfs";
                        reg = <0x620000 0x5E0000>;
                };

diff --git a/arch/arm/dts/zynqmp-zc1254-revA.dts b/arch/arm/dts/zynqmp-zc1254-revA.dts
index d6b2834f3aa6ff844f94359c3612cd90f152f8de..9cc1c0c6c5a7195fd57a5cb4f5a782d3205279d8 100644 (file)
--- a/arch/arm/dts/zynqmp-zc1254-revA.dts
+++ b/arch/arm/dts/zynqmp-zc1254-revA.dts
@@ -48,19 +48,19 @@
                spi-tx-bus-width = <1>;
                spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
                spi-max-frequency = <108000000>; /* Based on DC1 spec */
-               partition@qspi-fsbl-uboot { /* for testing purpose */
+               partition@0 { /* for testing purpose */
                        label = "qspi-fsbl-uboot";
                        reg = <0x0 0x100000>;
                };
-               partition@qspi-linux { /* for testing purpose */
+               partition@100000 { /* for testing purpose */
                        label = "qspi-linux";
                        reg = <0x100000 0x500000>;
                };
-               partition@qspi-device-tree { /* for testing purpose */
+               partition@600000 { /* for testing purpose */
                        label = "qspi-device-tree";
                        reg = <0x600000 0x20000>;
                };
-               partition@qspi-rootfs { /* for testing purpose */
+               partition@620000 { /* for testing purpose */
                        label = "qspi-rootfs";
                        reg = <0x620000 0x5E0000>;
                };

diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
index fa3824d2a126f6bdd25b96595894318104d17b87..0805b93c4ac953c511d0d40934b5ed0957afcc06 100644 (file)
--- a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
@@ -108,19 +108,19 @@
                spi-tx-bus-width = <1>;
                spi-rx-bus-width = <4>;
                spi-max-frequency = <108000000>; /* Based on DC1 spec */
-               partition@qspi-fsbl-uboot { /* for testing purpose */
+               partition@0 { /* for testing purpose */
                        label = "qspi-fsbl-uboot";
                        reg = <0x0 0x100000>;
                };
-               partition@qspi-linux { /* for testing purpose */
+               partition@100000 { /* for testing purpose */
                        label = "qspi-linux";
                        reg = <0x100000 0x500000>;
                };
-               partition@qspi-device-tree { /* for testing purpose */
+               partition@600000 { /* for testing purpose */
                        label = "qspi-device-tree";
                        reg = <0x600000 0x20000>;
                };
-               partition@qspi-rootfs { /* for testing purpose */
+               partition@620000 { /* for testing purpose */
                        label = "qspi-rootfs";
                        reg = <0x620000 0x5E0000>;
                };

diff --git a/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts b/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts
index 6655b86a8029dc1a26c9051e2458997bdb1a9a37..9b38b8b919e2114cbfc78c8025659c2d6978d5c1 100644 (file)
--- a/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts
@@ -187,19 +187,19 @@
                spi-tx-bus-width = <1>;
                spi-rx-bus-width = <4>; /* also DUAL configuration possible */
                spi-max-frequency = <108000000>; /* Based on DC1 spec */
-               partition@qspi-fsbl-uboot { /* for testing purpose */
+               partition@0 { /* for testing purpose */
                        label = "qspi-fsbl-uboot";
                        reg = <0x0 0x100000>;
                };
-               partition@qspi-linux { /* for testing purpose */
+               partition@100000 { /* for testing purpose */
                        label = "qspi-linux";
                        reg = <0x100000 0x500000>;
                };
-               partition@qspi-device-tree { /* for testing purpose */
+               partition@600000 { /* for testing purpose */
                        label = "qspi-device-tree";
                        reg = <0x600000 0x20000>;
                };
-               partition@qspi-rootfs { /* for testing purpose */
+               partition@620000 { /* for testing purpose */
                        label = "qspi-rootfs";
                        reg = <0x620000 0x5E0000>;
                };

diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts
index fd6dfdd3c22508342a5c510904fb19e1f7cbe3b6..d250681600a85cc1a29b9a980308f8a541e22c20 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu102-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revA.dts
@@ -614,19 +614,19 @@
                spi-tx-bus-width = <1>;
                spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
                spi-max-frequency = <108000000>; /* Based on DC1 spec */
-               partition@qspi-fsbl-uboot { /* for testing purpose */
+               partition@0 { /* for testing purpose */
                        label = "qspi-fsbl-uboot";
                        reg = <0x0 0x100000>;
                };
-               partition@qspi-linux { /* for testing purpose */
+               partition@100000 { /* for testing purpose */
                        label = "qspi-linux";
                        reg = <0x100000 0x500000>;
                };
-               partition@qspi-device-tree { /* for testing purpose */
+               partition@600000 { /* for testing purpose */
                        label = "qspi-device-tree";
                        reg = <0x600000 0x20000>;
                };
-               partition@qspi-rootfs { /* for testing purpose */
+               partition@620000 { /* for testing purpose */
                        label = "qspi-rootfs";
                        reg = <0x620000 0x5E0000>;
                };

diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts
index 6375b47ff859bdfa8c6af832ba6e8e83153b34cb..3ceb39dce02babdaa9d3c0e9b9cf495387f574a8 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu104-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revA.dts
@@ -209,19 +209,19 @@
                spi-tx-bus-width = <1>;
                spi-rx-bus-width = <4>;
                spi-max-frequency = <108000000>; /* Based on DC1 spec */
-               partition@qspi-fsbl-uboot { /* for testing purpose */
+               partition@0 { /* for testing purpose */
                        label = "qspi-fsbl-uboot";
                        reg = <0x0 0x100000>;
                };
-               partition@qspi-linux { /* for testing purpose */
+               partition@100000 { /* for testing purpose */
                        label = "qspi-linux";
                        reg = <0x100000 0x500000>;
                };
-               partition@qspi-device-tree { /* for testing purpose */
+               partition@600000 { /* for testing purpose */
                        label = "qspi-device-tree";
                        reg = <0x600000 0x20000>;
                };
-               partition@qspi-rootfs { /* for testing purpose */
+               partition@620000 { /* for testing purpose */
                        label = "qspi-rootfs";
                        reg = <0x620000 0x5E0000>;
                };

diff --git a/arch/arm/dts/zynqmp-zcu104-revC.dts b/arch/arm/dts/zynqmp-zcu104-revC.dts
index 425d7605bf5ccafb15fc58f26a5a36a4036443a9..7dad4523deb0b43a5e3b9f89a230cac6ed45b79e 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu104-revC.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revC.dts
@@ -222,19 +222,19 @@
                spi-tx-bus-width = <1>;
                spi-rx-bus-width = <4>;
                spi-max-frequency = <108000000>; /* Based on DC1 spec */
-               partition@qspi-fsbl-uboot { /* for testing purpose */
+               partition@0 { /* for testing purpose */
                        label = "qspi-fsbl-uboot";
                        reg = <0x0 0x100000>;
                };
-               partition@qspi-linux { /* for testing purpose */
+               partition@100000 { /* for testing purpose */
                        label = "qspi-linux";
                        reg = <0x100000 0x500000>;
                };
-               partition@qspi-device-tree { /* for testing purpose */
+               partition@600000 { /* for testing purpose */
                        label = "qspi-device-tree";
                        reg = <0x600000 0x20000>;
                };
-               partition@qspi-rootfs { /* for testing purpose */
+               partition@620000 { /* for testing purpose */
                        label = "qspi-rootfs";
                        reg = <0x620000 0x5E0000>;
                };

diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts
index a5c4309f2f39070d1154a27e85384f842f9779b2..221685fd23bee46c303d27e0acba175966a6a51f 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu106-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu106-revA.dts
@@ -612,19 +612,19 @@
                spi-tx-bus-width = <1>;
                spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
                spi-max-frequency = <108000000>; /* Based on DC1 spec */
-               partition@qspi-fsbl-uboot { /* for testing purpose */
+               partition@0 { /* for testing purpose */
                        label = "qspi-fsbl-uboot";
                        reg = <0x0 0x100000>;
                };
-               partition@qspi-linux { /* for testing purpose */
+               partition@100000 { /* for testing purpose */
                        label = "qspi-linux";
                        reg = <0x100000 0x500000>;
                };
-               partition@qspi-device-tree { /* for testing purpose */
+               partition@600000 { /* for testing purpose */
                        label = "qspi-device-tree";
                        reg = <0x600000 0x20000>;
                };
-               partition@qspi-rootfs { /* for testing purpose */
+               partition@620000 { /* for testing purpose */
                        label = "qspi-rootfs";
                        reg = <0x620000 0x5E0000>;
                };

diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts
index 755c30e9ff67ac6188046ad0cd6ae1f37ac29c97..d16bf8ac7ac7b68401effc61964ffc85dd03b105 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu111-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu111-revA.dts
@@ -525,19 +525,19 @@
                spi-tx-bus-width = <1>;
                spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
                spi-max-frequency = <108000000>; /* Based on DC1 spec */
-               partition@qspi-fsbl-uboot { /* for testing purpose */
+               partition@0 { /* for testing purpose */
                        label = "qspi-fsbl-uboot";
                        reg = <0x0 0x100000>;
                };
-               partition@qspi-linux { /* for testing purpose */
+               partition@100000 { /* for testing purpose */
                        label = "qspi-linux";
                        reg = <0x100000 0x500000>;
                };
-               partition@qspi-device-tree { /* for testing purpose */
+               partition@600000 { /* for testing purpose */
                        label = "qspi-device-tree";
                        reg = <0x600000 0x20000>;
                };
-               partition@qspi-rootfs { /* for testing purpose */
+               partition@620000 { /* for testing purpose */
                        label = "qspi-rootfs";
                        reg = <0x620000 0x5E0000>;
                };

diff --git a/arch/arm/dts/zynqmp-zcu1275-revA.dts b/arch/arm/dts/zynqmp-zcu1275-revA.dts
index 8755bc433b4f684b70689ff5dfbec216d3b1a51f..cdd5c341878ff83172920e55b28edc75859a240a 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu1275-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu1275-revA.dts
@@ -49,19 +49,19 @@
                spi-tx-bus-width = <1>;
                spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
                spi-max-frequency = <108000000>; /* Based on DC1 spec */
-               partition@qspi-fsbl-uboot { /* for testing purpose */
+               partition@0 { /* for testing purpose */
                        label = "qspi-fsbl-uboot";
                        reg = <0x0 0x100000>;
                };
-               partition@qspi-linux { /* for testing purpose */
+               partition@100000 { /* for testing purpose */
                        label = "qspi-linux";
                        reg = <0x100000 0x500000>;
                };
-               partition@qspi-device-tree { /* for testing purpose */
+               partition@600000 { /* for testing purpose */
                        label = "qspi-device-tree";
                        reg = <0x600000 0x20000>;
                };
-               partition@qspi-rootfs { /* for testing purpose */
+               partition@620000 { /* for testing purpose */
                        label = "qspi-rootfs";
                        reg = <0x620000 0x5E0000>;
                };

diff --git a/arch/arm/dts/zynqmp-zcu1275-revB.dts b/arch/arm/dts/zynqmp-zcu1275-revB.dts
index 16f609c7e5c019bdee73ca26b8ad0687cd407262..430fc5adb4239fc511f017aad976139b92453ebb 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu1275-revB.dts
+++ b/arch/arm/dts/zynqmp-zcu1275-revB.dts
@@ -50,19 +50,19 @@
                spi-tx-bus-width = <1>;
                spi-rx-bus-width = <1>;
                spi-max-frequency = <108000000>; /* Based on DC1 spec */
-               partition@qspi-fsbl-uboot { /* for testing purpose */
+               partition@0 { /* for testing purpose */
                        label = "qspi-fsbl-uboot";
                        reg = <0x0 0x100000>;
                };
-               partition@qspi-linux { /* for testing purpose */
+               partition@100000 { /* for testing purpose */
                        label = "qspi-linux";
                        reg = <0x100000 0x500000>;
                };
-               partition@qspi-device-tree { /* for testing purpose */
+               partition@600000 { /* for testing purpose */
                        label = "qspi-device-tree";
                        reg = <0x600000 0x20000>;
                };
-               partition@qspi-rootfs { /* for testing purpose */
+               partition@620000 { /* for testing purpose */
                        label = "qspi-rootfs";
                        reg = <0x620000 0x5E0000>;
                };