powerpc/mpc85xx: support application without resetvec segment in the linker script

For SD/SPI 2-stage bootloader, the On-Chip Rom code loads the SPL into L2 SRAM,
then jump to it to begin execution. After that, the SPL loads the final uboot
image into DDR, then jump to it to begin execution. The segment .resetvec in
the SPL and in final U-boot is useless.

So, add new symbols CONFIG_SYS_MPC85XX_NO_RESETVEC for this application.
If CONFIG_SYS_MPC85XX_NO_RESETVEC is set, the segment .resetvec is excluded
and the segment .bootpg is placed in the previous 4K of the segment .text.

Signed-off-by: Ying Zhang <b40530@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

diff --git a/README b/README
index 983d55ecea2c6a297bbccc38164b1e098d293a96..88274ed02103b89d4ac5fbbc0f4395067836c051 100644 (file)
--- a/README
+++ b/README
@@ -4088,6 +4088,11 @@ Low Level (hardware related) configuration options:
                that is executed before the actual U-Boot. E.g. when
                compiling a NAND SPL.
 
+- CONFIG_SYS_MPC85XX_NO_RESETVEC
+               Only for 85xx systems. If this variable is specified, the section
+               .resetvec is not kept and the section .bootpg is placed in the
+               previous 4k of the .text section.
+
 - CONFIG_ARCH_MAP_SYSMEM
                Generally U-Boot (and in particular the md command) uses
                effective address. It is therefore not necessary to regard

diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
index cf6fa7c936dcc54f2f7776bce9bfb5090e11e8eb..4591760e2d50e43276879c17f62845ced611e484 100644 (file)
--- a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
+++ b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
@@ -26,6 +26,13 @@
 #include "config.h"    /* CONFIG_BOARDDIR */
 
 OUTPUT_ARCH(powerpc)
+#ifdef CONFIG_SYS_MPC85XX_NO_RESETVEC
+PHDRS
+{
+       text PT_LOAD;
+       bss PT_LOAD;
+}
+#endif
 SECTIONS
 {
        . = CONFIG_SPL_TEXT_BASE;
@@ -68,9 +75,16 @@ SECTIONS
 #else
 #error unknown NAND controller
 #endif
+#ifdef CONFIG_SYS_MPC85XX_NO_RESETVEC
+       .bootpg ADDR(.text) - 0x1000 :
+       {
+               KEEP(*(.bootpg))
+       } :text = 0xffff
+#else
        .resetvec ADDR(.text) + RESET_VECTOR_OFFSET : {
                KEEP(*(.resetvec))
        } = 0xffff
+#endif
 
        /*
         * Make sure that the bss segment isn't linked at 0x0, otherwise its

diff --git a/arch/powerpc/cpu/mpc85xx/u-boot.lds b/arch/powerpc/cpu/mpc85xx/u-boot.lds
index 0503dce5ae4345edf6221b8d169720c05c5231e3..2643563d4dadcce2f5b9f08f4a7864ba10896ea4 100644 (file)
--- a/arch/powerpc/cpu/mpc85xx/u-boot.lds
+++ b/arch/powerpc/cpu/mpc85xx/u-boot.lds
@@ -95,6 +95,13 @@ SECTIONS
   . = ALIGN(256);
   __init_end = .;
 
+#ifdef CONFIG_SYS_MPC85XX_NO_RESETVEC
+  .bootpg ADDR(.text) - 0x1000 :
+  {
+    KEEP(arch/powerpc/cpu/mpc85xx/start.o (.bootpg))
+  } :text = 0xffff
+  . = ADDR(.text) + 0x80000;
+#else
   .bootpg RESET_VECTOR_ADDRESS - 0xffc :
   {
     arch/powerpc/cpu/mpc85xx/start.o   (.bootpg)
@@ -116,6 +123,7 @@ SECTIONS
    */
 #if (RESET_VECTOR_ADDRESS == 0xfffffffc)
   . |= 0x10;
+#endif
 #endif
 
   __bss_start = .;