The driver is actually for the Designware DWC2 controller.
This patch renames the global s3c_udc.h header to dwc2_udc.h.
The rename is done automatically:
$ sed -i "s/s3c_udc\.h/dwc2_udc.h/g" \
`git grep "s3c_udc\.h" | cut -d : -f 1`
Signed-off-by: Marek Vasut <marex@denx.de>
#include <asm/io.h>
#include <usb.h>
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
#include <usb_mass_storage.h>
#include <micrel.h>
#include <asm/io.h>
#include <usb.h>
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
#include <usb_mass_storage.h>
#include <micrel.h>
#include <asm/arch/sysmap.h>
#include <usb.h>
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
#include <g_dnl.h>
#define SECWATCHDOG_SDOGCR_OFFSET 0x00000000
#include <asm/io.h>
#include <usb.h>
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
#include <usb_mass_storage.h>
DECLARE_GLOBAL_DATA_PTR;
#include <asm/io.h>
#include <usb.h>
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
#include <usb_mass_storage.h>
#include <micrel.h>
#include <asm/gpio.h>
#include <asm/arch/mmc.h>
#include <power/pmic.h>
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
#include <asm/arch/cpu.h>
#include <power/max8998_pmic.h>
#include <samsung/misc.h>
#include <errno.h>
#include <mmc.h>
#include <usb.h>
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
#include <samsung/misc.h>
#include "setup.h"
#include <asm/arch/watchdog.h>
#include <asm/arch/power.h>
#include <power/pmic.h>
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
#include <power/max8997_pmic.h>
#include <power/max8997_muic.h>
#include <power/battery.h>
#include <libtizen.h>
#include <errno.h>
#include <usb.h>
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
#include <usb_mass_storage.h>
DECLARE_GLOBAL_DATA_PTR;
#include <ld9040.h>
#include <power/pmic.h>
#include <usb.h>
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
#include <asm/arch/cpu.h>
#include <power/max8998_pmic.h>
#include <libtizen.h>
#include <asm/io.h>
#include <usb.h>
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
#include <usb_mass_storage.h>
#include <micrel.h>
#define DEBUG_OUT_EP 0
#define DEBUG_IN_EP 0
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
#define EP0_CON 0
#define EP_MASK 0xF
#include "dwc2_udc_otg_priv.h"
#include <usb/lin_gadget_compat.h>
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
void otg_phy_init(struct dwc2_udc *dev)
{
#include <linux/usb/gadget.h>
#include <linux/list.h>
#include <usb/lin_gadget_compat.h>
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
/*-------------------------------------------------------------------------*/
/* DMA bounce buffer size, 16K is enough even for mass storage */
/*
- * drivers/usb/gadget/s3c_udc.h
+ * drivers/usb/gadget/dwc2_udc.h
* Designware DWC2 on-chip full/high speed USB device controllers
* Copyright (C) 2005 for Samsung Electronics
*
* SPDX-License-Identifier: GPL-2.0+
*/
-#ifndef __S3C_USB_GADGET
-#define __S3C_USB_GADGET
+#ifndef __DWC2_USB_GADGET
+#define __DWC2_USB_GADGET
#define PHY0_SLEEP (1 << 5)
int dwc2_udc_probe(struct dwc2_plat_otg_data *pdata);
-#endif
+#endif /* __DWC2_USB_GADGET */