+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2012 - 2013 CompuLab, Ltd. <www.compulab.co.il>
- *
- * Authors: Nikita Kiryanov <nikita@compulab.co.il>
- *
- * Parsing code based on linux/drivers/video/pxafb.c
- */
-
-#include <common.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <env.h>
-#include <stdio_dev.h>
-#include <asm/arch/dss.h>
-#include <lcd.h>
-#include <scf0403_lcd.h>
-#include <asm/arch-omap3/dss.h>
-
-enum display_type {
- NONE,
- DVI,
- DVI_CUSTOM,
- DATA_IMAGE, /* #define CONFIG_SCF0403_LCD to use */
-};
-
-#define CMAP_ADDR 0x80100000
-
-/*
- * The frame buffer is allocated before we have the chance to parse user input.
- * To make sure enough memory is allocated for all resolutions, we define
- * vl_{col | row} to the maximal resolution supported by OMAP3.
- */
-vidinfo_t panel_info = {
- .vl_col = 1400,
- .vl_row = 1050,
- .vl_bpix = LCD_BPP,
- .cmap = (ushort *)CMAP_ADDR,
-};
-
-static struct panel_config panel_cfg;
-static enum display_type lcd_def;
-
-/*
- * A note on DVI presets;
- * U-Boot can convert 8 bit BMP data to 16 bit BMP data, and OMAP DSS can
- * convert 16 bit data into 24 bit data. Thus, GFXFORMAT_RGB16 allows us to
- * support two BMP types with one setting.
- */
-static const struct panel_config preset_dvi_640X480 = {
- .lcd_size = PANEL_LCD_SIZE(640, 480),
- .timing_h = DSS_HBP(48) | DSS_HFP(16) | DSS_HSW(96),
- .timing_v = DSS_VBP(33) | DSS_VFP(10) | DSS_VSW(2),
- .pol_freq = DSS_IHS | DSS_IVS | DSS_IPC,
- .divisor = 12 | (1 << 16),
- .data_lines = LCD_INTERFACE_24_BIT,
- .panel_type = ACTIVE_DISPLAY,
- .load_mode = 2,
- .gfx_format = GFXFORMAT_RGB16,
-};
-
-static const struct panel_config preset_dvi_800X600 = {
- .lcd_size = PANEL_LCD_SIZE(800, 600),
- .timing_h = DSS_HBP(88) | DSS_HFP(40) | DSS_HSW(128),
- .timing_v = DSS_VBP(23) | DSS_VFP(1) | DSS_VSW(4),
- .pol_freq = DSS_IHS | DSS_IVS | DSS_IPC,
- .divisor = 8 | (1 << 16),
- .data_lines = LCD_INTERFACE_24_BIT,
- .panel_type = ACTIVE_DISPLAY,
- .load_mode = 2,
- .gfx_format = GFXFORMAT_RGB16,
-};
-
-static const struct panel_config preset_dvi_1024X768 = {
- .lcd_size = PANEL_LCD_SIZE(1024, 768),
- .timing_h = DSS_HBP(160) | DSS_HFP(24) | DSS_HSW(136),
- .timing_v = DSS_VBP(29) | DSS_VFP(3) | DSS_VSW(6),
- .pol_freq = DSS_IHS | DSS_IVS | DSS_IPC,
- .divisor = 5 | (1 << 16),
- .data_lines = LCD_INTERFACE_24_BIT,
- .panel_type = ACTIVE_DISPLAY,
- .load_mode = 2,
- .gfx_format = GFXFORMAT_RGB16,
-};
-
-static const struct panel_config preset_dvi_1152X864 = {
- .lcd_size = PANEL_LCD_SIZE(1152, 864),
- .timing_h = DSS_HBP(256) | DSS_HFP(64) | DSS_HSW(128),
- .timing_v = DSS_VBP(32) | DSS_VFP(1) | DSS_VSW(3),
- .pol_freq = DSS_IHS | DSS_IVS | DSS_IPC,
- .divisor = 4 | (1 << 16),
- .data_lines = LCD_INTERFACE_24_BIT,
- .panel_type = ACTIVE_DISPLAY,
- .load_mode = 2,
- .gfx_format = GFXFORMAT_RGB16,
-};
-
-static const struct panel_config preset_dvi_1280X960 = {
- .lcd_size = PANEL_LCD_SIZE(1280, 960),
- .timing_h = DSS_HBP(312) | DSS_HFP(96) | DSS_HSW(112),
- .timing_v = DSS_VBP(36) | DSS_VFP(1) | DSS_VSW(3),
- .pol_freq = DSS_IHS | DSS_IVS | DSS_IPC,
- .divisor = 3 | (1 << 16),
- .data_lines = LCD_INTERFACE_24_BIT,
- .panel_type = ACTIVE_DISPLAY,
- .load_mode = 2,
- .gfx_format = GFXFORMAT_RGB16,
-};
-
-static const struct panel_config preset_dvi_1280X1024 = {
- .lcd_size = PANEL_LCD_SIZE(1280, 1024),
- .timing_h = DSS_HBP(248) | DSS_HFP(48) | DSS_HSW(112),
- .timing_v = DSS_VBP(38) | DSS_VFP(1) | DSS_VSW(3),
- .pol_freq = DSS_IHS | DSS_IVS | DSS_IPC,
- .divisor = 3 | (1 << 16),
- .data_lines = LCD_INTERFACE_24_BIT,
- .panel_type = ACTIVE_DISPLAY,
- .load_mode = 2,
- .gfx_format = GFXFORMAT_RGB16,
-};
-
-static const struct panel_config preset_dataimage_480X800 = {
- .lcd_size = PANEL_LCD_SIZE(480, 800),
- .timing_h = DSS_HBP(2) | DSS_HFP(2) | DSS_HSW(2),
- .timing_v = DSS_VBP(17) | DSS_VFP(20) | DSS_VSW(3),
- .pol_freq = DSS_IVS | DSS_IHS | DSS_IPC | DSS_ONOFF,
- .divisor = 10 | (1 << 10),
- .data_lines = LCD_INTERFACE_18_BIT,
- .panel_type = ACTIVE_DISPLAY,
- .load_mode = 2,
- .gfx_format = GFXFORMAT_RGB16,
-};
-
-/*
- * set_resolution_params()
- *
- * Due to usage of multiple display related APIs resolution data is located in
- * more than one place. This function updates them all.
- */
-static void set_resolution_params(int x, int y)
-{
- panel_cfg.lcd_size = PANEL_LCD_SIZE(x, y);
- panel_info.vl_col = x;
- panel_info.vl_row = y;
- lcd_line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8;
-}
-
-static void set_preset(const struct panel_config preset, int x_res, int y_res)
-{
- panel_cfg = preset;
- set_resolution_params(x_res, y_res);
-}
-
-static enum display_type set_dvi_preset(const struct panel_config preset,
- int x_res, int y_res)
-{
- set_preset(preset, x_res, y_res);
- return DVI;
-}
-
-static enum display_type set_dataimage_preset(const struct panel_config preset,
- int x_res, int y_res)
-{
- set_preset(preset, x_res, y_res);
- return DATA_IMAGE;
-}
-
-/*
- * parse_mode() - parse the mode parameter of custom lcd settings
- *
- * @mode: <res_x>x<res_y>
- *
- * Returns -1 on error, 0 on success.
- */
-static int parse_mode(const char *mode)
-{
- unsigned int modelen = strlen(mode);
- int res_specified = 0;
- unsigned int xres = 0, yres = 0;
- int yres_specified = 0;
- int i;
-
- for (i = modelen - 1; i >= 0; i--) {
- switch (mode[i]) {
- case 'x':
- if (!yres_specified) {
- yres = simple_strtoul(&mode[i + 1], NULL, 0);
- yres_specified = 1;
- } else {
- goto done_parsing;
- }
-
- break;
- case '0' ... '9':
- break;
- default:
- goto done_parsing;
- }
- }
-
- if (i < 0 && yres_specified) {
- xres = simple_strtoul(mode, NULL, 0);
- res_specified = 1;
- }
-
-done_parsing:
- if (res_specified) {
- set_resolution_params(xres, yres);
- } else {
- printf("LCD: invalid mode: %s\n", mode);
- return -1;
- }
-
- return 0;
-}
-
-#define PIXEL_CLK_NUMERATOR (26 * 432 / 39)
-/*
- * parse_pixclock() - Parse the pixclock parameter of custom lcd settings
- *
- * @pixclock: the desired pixel clock
- *
- * Returns -1 on error, 0 on success.
- *
- * Handling the pixel_clock:
- *
- * Pixel clock is defined in the OMAP35x TRM as follows:
- * pixel_clock =
- * (SYS_CLK * 2 * PRCM.CM_CLKSEL2_PLL[18:8]) /
- * (DSS.DISPC_DIVISOR[23:16] * DSS.DISPC_DIVISOR[6:0] *
- * PRCM.CM_CLKSEL_DSS[4:0] * (PRCM.CM_CLKSEL2_PLL[6:0] + 1))
- *
- * In practice, this means that in order to set the
- * divisor for the desired pixel clock one needs to
- * solve the following equation:
- *
- * 26 * 432 / (39 * <pixel_clock>) = DSS.DISPC_DIVISOR[6:0]
- *
- * NOTE: the explicit equation above is reduced. Do not
- * try to infer anything from these numbers.
- */
-static int parse_pixclock(char *pixclock)
-{
- int divisor, pixclock_val;
- char *pixclk_start = pixclock;
-
- pixclock_val = dectoul(pixclock, &pixclock);
- divisor = DIV_ROUND_UP(PIXEL_CLK_NUMERATOR, pixclock_val);
- /* 0 and 1 are illegal values for PCD */
- if (divisor <= 1)
- divisor = 2;
-
- panel_cfg.divisor = divisor | (1 << 16);
- if (pixclock[0] != '\0') {
- printf("LCD: invalid value for pixclock:%s\n", pixclk_start);
- return -1;
- }
-
- return 0;
-}
-
-/*
- * parse_setting() - parse a single setting of custom lcd parameters
- *
- * @setting: The custom lcd setting <name>:<value>
- *
- * Returns -1 on failure, 0 on success.
- */
-static int parse_setting(char *setting)
-{
- int num_val;
- char *setting_start = setting;
-
- if (!strncmp(setting, "mode:", 5)) {
- return parse_mode(setting + 5);
- } else if (!strncmp(setting, "pixclock:", 9)) {
- return parse_pixclock(setting + 9);
- } else if (!strncmp(setting, "left:", 5)) {
- num_val = simple_strtoul(setting + 5, &setting, 0);
- panel_cfg.timing_h |= DSS_HBP(num_val);
- } else if (!strncmp(setting, "right:", 6)) {
- num_val = simple_strtoul(setting + 6, &setting, 0);
- panel_cfg.timing_h |= DSS_HFP(num_val);
- } else if (!strncmp(setting, "upper:", 6)) {
- num_val = simple_strtoul(setting + 6, &setting, 0);
- panel_cfg.timing_v |= DSS_VBP(num_val);
- } else if (!strncmp(setting, "lower:", 6)) {
- num_val = simple_strtoul(setting + 6, &setting, 0);
- panel_cfg.timing_v |= DSS_VFP(num_val);
- } else if (!strncmp(setting, "hsynclen:", 9)) {
- num_val = simple_strtoul(setting + 9, &setting, 0);
- panel_cfg.timing_h |= DSS_HSW(num_val);
- } else if (!strncmp(setting, "vsynclen:", 9)) {
- num_val = simple_strtoul(setting + 9, &setting, 0);
- panel_cfg.timing_v |= DSS_VSW(num_val);
- } else if (!strncmp(setting, "hsync:", 6)) {
- if (simple_strtoul(setting + 6, &setting, 0) == 0)
- panel_cfg.pol_freq |= DSS_IHS;
- else
- panel_cfg.pol_freq &= ~DSS_IHS;
- } else if (!strncmp(setting, "vsync:", 6)) {
- if (simple_strtoul(setting + 6, &setting, 0) == 0)
- panel_cfg.pol_freq |= DSS_IVS;
- else
- panel_cfg.pol_freq &= ~DSS_IVS;
- } else if (!strncmp(setting, "outputen:", 9)) {
- if (simple_strtoul(setting + 9, &setting, 0) == 0)
- panel_cfg.pol_freq |= DSS_IEO;
- else
- panel_cfg.pol_freq &= ~DSS_IEO;
- } else if (!strncmp(setting, "pixclockpol:", 12)) {
- if (simple_strtoul(setting + 12, &setting, 0) == 0)
- panel_cfg.pol_freq |= DSS_IPC;
- else
- panel_cfg.pol_freq &= ~DSS_IPC;
- } else if (!strncmp(setting, "active", 6)) {
- panel_cfg.panel_type = ACTIVE_DISPLAY;
- return 0; /* Avoid sanity check below */
- } else if (!strncmp(setting, "passive", 7)) {
- panel_cfg.panel_type = PASSIVE_DISPLAY;
- return 0; /* Avoid sanity check below */
- } else if (!strncmp(setting, "display:", 8)) {
- if (!strncmp(setting + 8, "dvi", 3)) {
- lcd_def = DVI_CUSTOM;
- return 0; /* Avoid sanity check below */
- }
- } else {
- printf("LCD: unknown option %s\n", setting_start);
- return -1;
- }
-
- if (setting[0] != '\0') {
- printf("LCD: invalid value for %s\n", setting_start);
- return -1;
- }
-
- return 0;
-}
-
-/*
- * env_parse_customlcd() - parse custom lcd params from an environment variable.
- *
- * @custom_lcd_params: The environment variable containing the lcd params.
- *
- * Returns -1 on failure, 0 on success.
- */
-static int parse_customlcd(char *custom_lcd_params)
-{
- char params_cpy[160];
- char *setting;
-
- strncpy(params_cpy, custom_lcd_params, 160);
- setting = strtok(params_cpy, ",");
- while (setting) {
- if (parse_setting(setting) < 0)
- return -1;
-
- setting = strtok(NULL, ",");
- }
-
- /* Currently we don't support changing this via custom lcd params */
- panel_cfg.data_lines = LCD_INTERFACE_24_BIT;
- panel_cfg.gfx_format = GFXFORMAT_RGB16; /* See dvi predefines note */
-
- return 0;
-}
-
-/*
- * env_parse_displaytype() - parse display type.
- *
- * Parses the environment variable "displaytype", which contains the
- * name of the display type or preset, in which case it applies its
- * configurations.
- *
- * Returns the type of display that was specified.
- */
-static enum display_type env_parse_displaytype(char *displaytype)
-{
- if (!strncmp(displaytype, "dvi640x480", 10))
- return set_dvi_preset(preset_dvi_640X480, 640, 480);
- else if (!strncmp(displaytype, "dvi800x600", 10))
- return set_dvi_preset(preset_dvi_800X600, 800, 600);
- else if (!strncmp(displaytype, "dvi1024x768", 11))
- return set_dvi_preset(preset_dvi_1024X768, 1024, 768);
- else if (!strncmp(displaytype, "dvi1152x864", 11))
- return set_dvi_preset(preset_dvi_1152X864, 1152, 864);
- else if (!strncmp(displaytype, "dvi1280x960", 11))
- return set_dvi_preset(preset_dvi_1280X960, 1280, 960);
- else if (!strncmp(displaytype, "dvi1280x1024", 12))
- return set_dvi_preset(preset_dvi_1280X1024, 1280, 1024);
- else if (!strncmp(displaytype, "dataimage480x800", 16))
- return set_dataimage_preset(preset_dataimage_480X800, 480, 800);
-
- return NONE;
-}
-
-void lcd_ctrl_init(void *lcdbase)
-{
- struct prcm *prcm = (struct prcm *)PRCM_BASE;
- char *custom_lcd;
- char *displaytype = env_get("displaytype");
-
- if (displaytype == NULL)
- return;
-
- lcd_def = env_parse_displaytype(displaytype);
- /* If we did not recognize the preset, check if it's an env variable */
- if (lcd_def == NONE) {
- custom_lcd = env_get(displaytype);
- if (custom_lcd == NULL || parse_customlcd(custom_lcd) < 0)
- return;
- }
-
- panel_cfg.frame_buffer = lcdbase;
- omap3_dss_panel_config(&panel_cfg);
- /*
- * Pixel clock is defined with many divisions and only few
- * multiplications of the system clock. Since DSS FCLK divisor is set
- * to 16 by default, we need to set it to a smaller value, like 3
- * (chosen via trial and error).
- */
- clrsetbits_le32(&prcm->clksel_dss, 0xF, 3);
-}
-
-#ifdef CONFIG_SCF0403_LCD
-static void scf0403_enable(void)
-{
- gpio_direction_output(58, 1);
- scf0403_init(157);
-}
-#else
-static inline void scf0403_enable(void) {}
-#endif
-
-void lcd_enable(void)
-{
- switch (lcd_def) {
- case NONE:
- return;
- case DVI:
- case DVI_CUSTOM:
- gpio_direction_output(54, 0); /* Turn on DVI */
- break;
- case DATA_IMAGE:
- scf0403_enable();
- break;
- }
-
- omap3_dss_enable();
-}
-
-void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue) {}
projects / u-boot.git / commitdiff
