+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016 Andreas Färber
- */
-
-#include "imx6sx.dtsi"
-
-/ {
- compatible = "fsl,imx6sx";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
-
- red {
- label = "udoo-neo:red:mmc";
- gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- linux,default-trigger = "mmc0";
- };
-
- orange {
- label = "udoo-neo:orange:user";
- gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- };
-
- reg_sdio_pwr: regulator-sdio-pwr {
- compatible = "regulator-fixed";
- gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-name = "SDIO_PWR";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- };
-
- reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_otg1_reg>;
- regulator-name = "usb_otg1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_otg2_reg>;
- regulator-name = "usb_otg2_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- reg_wlan: regulator-wlan {
- compatible = "regulator-fixed";
- regulator-name = "wlan-en-regulator";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
- startup-delay-us = <70000>;
- enable-active-high;
- };
-};
-
-&fec1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet1>;
- phy-mode = "rmii";
- phy-reset-duration = <10>;
- phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- clock-frequency = <100000>;
- status = "okay";
-
- pmic: pmic@8 {
- compatible = "fsl,pfuze3000";
- reg = <0x08>;
-
- regulators {
- sw1a_reg: sw1a {
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1475000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <6250>;
- };
-
- sw1c_reg: sw1b {
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1475000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <6250>;
- };
-
- sw2_reg: sw2 {
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1850000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw3a_reg: sw3 {
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1650000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- swbst_reg: swbst {
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5150000>;
- };
-
- snvs_reg: vsnvs {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <3000000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vref_reg: vrefddr {
- regulator-boot-on;
- regulator-always-on;
- };
-
- vgen1_reg: vldo1 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vgen2_reg: vldo2 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1550000>;
- };
-
- vgen3_reg: vccsd {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vgen4_reg: v33 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vgen5_reg: vldo3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vgen6_reg: vldo4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
- };
- };
-};
-
-&i2c2 { /* Brick snap in sensors connector */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- clock-frequency = <100000>;
- status = "okay";
-};
-
-&i2c3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3>;
- clock-frequency = <100000>;
- status = "okay";
-
- hdmi-transmitter@70 {
- compatible = "nxp,tda998x";
- reg = <0x70>;
- interrupts-extended = <&gpio3 27 IRQ_TYPE_LEVEL_LOW>;
-
- ports {
- port {
- hdmi: endpoint {
- remote-endpoint = <&lcdc>;
- };
- };
- };
- };
-};
-
-&i2c4 { /* Onboard Motion sensors */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c4>;
- clock-frequency = <100000>;
- status = "disabled";
-};
-
-&lcdif1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd>;
- status = "okay";
-
- port {
- lcdc: endpoint {
- remote-endpoint = <&hdmi>;
- };
- };
-};
-
-&iomuxc {
- pinctrl_bt_reg: btreggrp {
- fsl,pins =
- <MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x15059>;
- };
-
- pinctrl_enet1: enet1grp {
- fsl,pins =
- <MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0xa0b1>,
- <MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1>,
- <MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1>,
- <MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1>,
- <MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1>,
- <MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1>,
-
- <MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x3081>,
- <MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0x3081>,
- <MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081>,
- <MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081>,
- <MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081>,
- <MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER 0x3081>,
-
- <MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91>;
- };
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins =
- <MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1>,
- <MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1>;
- };
-
- pinctrl_i2c2: i2c2grp {
- fsl,pins =
- <MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1>,
- <MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1>;
- };
-
- pinctrl_i2c3: i2c3grp {
- fsl,pins =
- <MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1>,
- <MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1>;
- };
-
- pinctrl_i2c4: i2c4grp {
- fsl,pins =
- <MX6SX_PAD_USB_H_DATA__I2C4_SDA 0x4001b8b1>,
- <MX6SX_PAD_USB_H_STROBE__I2C4_SCL 0x4001b8b1>;
- };
-
- pinctrl_lcd: lcdgrp {
- fsl,pins = <
- MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
- MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
- MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
- MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
- MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
- MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
- MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
- MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
- MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
- MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
- MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
- MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
- MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
- MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
- MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
- MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
- MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
- MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
- MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
- MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
- MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
- MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
- MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
- MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
- MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0
- MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
- MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
- MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
- MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
- >;
- };
-
- pinctrl_uart1: uart1grp {
- fsl,pins =
- <MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1>,
- <MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1>;
- };
-
- pinctrl_uart2: uart2grp {
- fsl,pins =
- <MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX 0x1b0b1>,
- <MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX 0x1b0b1>;
- };
-
- pinctrl_uart3: uart3grp {
- fsl,pins =
- <MX6SX_PAD_SD3_DATA4__UART3_DCE_RX 0x13059>,
- <MX6SX_PAD_SD3_DATA5__UART3_DCE_TX 0x13059>,
- <MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS 0x13059>,
- <MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS 0x13059>;
- };
-
- pinctrl_uart5: uart5grp {
- fsl,pins =
- <MX6SX_PAD_SD4_DATA4__UART5_DCE_RX 0x1b0b1>,
- <MX6SX_PAD_SD4_DATA5__UART5_DCE_TX 0x1b0b1>;
- };
-
- pinctrl_uart6: uart6grp {
- fsl,pins =
- <MX6SX_PAD_CSI_DATA00__UART6_RI_B 0x1b0b1>,
- <MX6SX_PAD_CSI_DATA01__UART6_DSR_B 0x1b0b1>,
- <MX6SX_PAD_CSI_DATA02__UART6_DTR_B 0x1b0b1>,
- <MX6SX_PAD_CSI_DATA03__UART6_DCD_B 0x1b0b1>,
- <MX6SX_PAD_CSI_DATA04__UART6_DCE_RX 0x1b0b1>,
- <MX6SX_PAD_CSI_DATA05__UART6_DCE_TX 0x1b0b1>,
- <MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS 0x1b0b1>,
- <MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS 0x1b0b1>;
- };
-
- pinctrl_otg1_reg: otg1grp {
- fsl,pins =
- <MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0>;
- };
-
- pinctrl_otg2_reg: otg2grp {
- fsl,pins =
- <MX6SX_PAD_NAND_RE_B__GPIO4_IO_12 0x10b0>;
- };
-
- pinctrl_usb_otg1: usbotg1grp {
- fsl,pins =
- <MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059>,
- <MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC 0x10b0>;
- };
-
- pinctrl_usb_otg2: usbot2ggrp {
- fsl,pins =
- <MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC 0x10b0>;
- };
-
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins =
- <MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059>,
- <MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059>,
- <MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059>,
- <MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059>,
- <MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059>,
- <MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059>,
- <MX6SX_PAD_SD1_DATA0__GPIO6_IO_2 0x17059>; /* CD */
- };
-
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins =
- <MX6SX_PAD_KEY_COL2__GPIO2_IO_12 0x15059>,
- <MX6SX_PAD_KEY_ROW1__GPIO2_IO_16 0x13059>,
- <MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17069>,
- <MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17069>,
- <MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17069>,
- <MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17069>,
- <MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17069>,
- <MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10069>,
- <MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT 0x10059>;
- };
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- status = "okay";
-};
-
-/* Cortex-M4 serial */
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- status = "disabled";
-};
-
-&uart3 { /* Bluetooth - only on Extended/Full versions */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
- uart-has-rtscts;
- status = "disabled";
-
- bluetooth {
- compatible = "ti,wl1831-st";
- enable-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_bt_reg>;
- max-speed = <921600>;
- };
-};
-
-/* Arduino serial */
-&uart5 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart5>;
- status = "disabled";
-};
-
-&uart6 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart6>;
- uart-has-rtscts;
- status = "disabled";
-};
-
-&usbotg1 { /* J2 micro USB port */
- vbus-supply = <®_usb_otg1_vbus>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb_otg1>;
- status = "okay";
-};
-
-&usbotg2 { /* J3 host USB port */
- vbus-supply = <®_usb_otg2_vbus>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb_otg2>;
- dr_mode = "host";
- status = "okay";
-};
-
-&usdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- vmmc-supply = <®_sdio_pwr>;
- bus-width = <4>;
- cd-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
- no-1-8-v;
- keep-power-in-suspend;
- wakeup-source;
- status = "okay";
-};
-
-&usdhc3 { /* Wi-Fi */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3>;
- non-removable;
- vmmc-supply = <®_wlan>;
- cap-power-off-card;
- wakeup-source;
- keep-power-in-suspend;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- wlcore: wlcore@2 {
- compatible = "ti,wl1831";
- reg = <2>;
- interrupt-parent = <&gpio2>;
- interrupts = <16 IRQ_TYPE_EDGE_RISING>;
- ref-clock-frequency = <38400000>;
- tcxo-clock-frequency = <26000000>;
- };
-};
projects / u-boot.git / commitdiff
