spl: dfu: move DFU Kconfig to SPL Kconfig

The DFU Kconfig menu entries should be part of the SPL
Kconfig file. Also avoid using the top level Makefile by
moving the config dependent build artifacts to the driver/
and driver/usb/gadget/ Makfiles.

With that, DFU can be built again in SPL if
CONFIG_SPL_DFU_SUPPORT is enabled.

Fixes: 6ad6102246d8 ("usb:gadget: Disallow DFU in SPL for now")
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>

diff --git a/Kconfig b/Kconfig
index f3a9f73dd0f3fbff3a7335e68f98259afed8bb61..529858a79dab58af5c86da3dc8ce0c927159913a 100644 (file)
--- a/Kconfig
+++ b/Kconfig
@@ -292,33 +292,6 @@ config FIT_IMAGE_POST_PROCESS
          injected into the FIT creation (i.e. the blobs would have been pre-
          processed before being added to the FIT image).
 
-config SPL_DFU_SUPPORT
-       bool "Enable SPL with DFU to load binaries to memory device"
-       depends on USB
-       help
-         Currently the SPL does not have capability to load the
-         binaries or boot images to boot devices like ram,eMMC,SPI,etc.
-         This feature enables the DFU (Device Firmware Upgarde) in SPL with
-         RAM memory device support. The ROM code will load and execute
-         the SPL built with dfu. The user can load binaries (u-boot/kernel) to
-         selected device partition from host-pc using dfu-utils.
-               This feature will be useful to flash the binaries to factory
-         or bare-metal boards using USB interface.
-
-choice
-       bool "DFU device selection"
-       depends on SPL_DFU_SUPPORT
-
-config SPL_DFU_RAM
-       bool "RAM device"
-       depends on SPL_DFU_SUPPORT
-       help
-        select RAM/DDR memory device for loading binary images
-        (u-boot/kernel) to the selected device partition using
-        DFU and execute the u-boot/kernel from RAM.
-
-endchoice
-
 config SYS_CLK_FREQ
        depends on ARC || ARCH_SUNXI
        int "CPU clock frequency"

diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index df9e0ce68f9ea2348af8aec3ebe5aea25456062e..77eadf92fe0229bf929df7e6c32c568feecfb320 100644 (file)
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -524,6 +524,32 @@ config SPL_USB_SUPPORT
          config options. This enables loading from USB using a configured
          device.
 
+config SPL_DFU_SUPPORT
+       bool "Support DFU (Device Firmware Upgarde)"
+       depends on SPL
+       select SPL_HASH_SUPPORT
+       help
+         This feature enables the DFU (Device Firmware Upgarde) in SPL with
+         RAM memory device support. The ROM code will load and execute
+         the SPL built with dfu. The user can load binaries (u-boot/kernel) to
+         selected device partition from host-pc using dfu-utils.
+         This feature is useful to flash the binaries to factory or bare-metal
+         boards using USB interface.
+
+choice
+       bool "DFU device selection"
+       depends on SPL_DFU_SUPPORT
+
+config SPL_DFU_RAM
+       bool "RAM device"
+       depends on SPL_DFU_SUPPORT
+       help
+        select RAM/DDR memory device for loading binary images
+        (u-boot/kernel) to the selected device partition using
+        DFU and execute the u-boot/kernel from RAM.
+
+endchoice
+
 config SPL_WATCHDOG_SUPPORT
        bool "Support watchdog drivers"
        depends on SPL

diff --git a/drivers/Makefile b/drivers/Makefile
index 761d0b3e85b4caee90e8aa798a81fcfd322c593d..40aba582629e453dd279c43b7f672014d6b37a47 100644 (file)
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -34,6 +34,9 @@ obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
 obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/
 obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
 obj-$(CONFIG_SPL_USBETH_SUPPORT) += usb/gadget/
+obj-$(CONFIG_SPL_DFU_SUPPORT) += usb/gadget/
+obj-$(CONFIG_SPL_DFU_SUPPORT) += usb/gadget/udc/
+obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu/
 obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
 obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
 obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/

diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index acc9964e232680cc74ce4773dd1f2d5b747556b3..5b18e8c1950aa00e28b83e5a16a3f5f9f10ce27e 100644 (file)
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -8,6 +8,10 @@
 obj-$(CONFIG_USB_GADGET) += epautoconf.o config.o usbstring.o
 obj-$(CONFIG_USB_ETHER) += epautoconf.o config.o usbstring.o
 
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_SPL_DFU_SUPPORT) += f_dfu.o
+endif
+
 # new USB gadget layer dependencies
 ifdef CONFIG_USB_GADGET
 obj-$(CONFIG_USB_GADGET_AT91) += at91_udc.o
@@ -18,13 +22,13 @@ obj-$(CONFIG_USB_GADGET_DWC2_OTG_PHY) += dwc2_udc_otg_phy.o
 obj-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o
 obj-$(CONFIG_CI_UDC)   += ci_udc.o
 obj-$(CONFIG_USB_GADGET_DOWNLOAD) += g_dnl.o
-obj-$(CONFIG_USB_FUNCTION_THOR) += f_thor.o
 ifndef CONFIG_SPL_BUILD
+obj-$(CONFIG_USB_FUNCTION_THOR) += f_thor.o
 obj-$(CONFIG_USB_FUNCTION_DFU) += f_dfu.o
-endif
 obj-$(CONFIG_USB_FUNCTION_MASS_STORAGE) += f_mass_storage.o
 obj-$(CONFIG_USB_FUNCTION_FASTBOOT) += f_fastboot.o
 endif
+endif
 ifdef CONFIG_USB_ETHER
 obj-y += ether.o
 obj-$(CONFIG_USB_ETH_RNDIS) += rndis.o

diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 1834d04afde3fb1101d25c5c11d6f6962c563fd2..75a78542045bafba2998ec9983c1301fec0c7b92 100644 (file)
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -134,7 +134,6 @@
 #undef CONFIG_CMD_BOOTD
 #ifdef CONFIG_SPL_DFU_SUPPORT
 #define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000
-#define CONFIG_SPL_HASH_SUPPORT
 #define DFU_ALT_INFO_RAM \
        "dfu_alt_info_ram=" \
        "kernel ram 0x80200000 0x4000000;" \

diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index 03a2f061a46cf2a72d0e6dbaaee4651f24364b7a..23b3997076f686fde5d831bc3453125eb61579e6 100644 (file)
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -66,9 +66,6 @@ endif
 
 libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
 libs-y += drivers/
-libs-$(CONFIG_SPL_DFU_SUPPORT) += drivers/dfu/
-libs-$(CONFIG_SPL_DFU_SUPPORT) += drivers/usb/gadget/
-libs-$(CONFIG_SPL_DFU_SUPPORT) += drivers/usb/gadget/udc/
 libs-$(CONFIG_SPL_DFU_SUPPORT) += drivers/usb/dwc3/
 libs-y += dts/
 libs-y += fs/